scholarly journals Nonlinear Radiation and Variable Viscosity Effects on Free Convection of a Power-Law Nanofluid Over a Truncated Cone in Porous Media With Zero Nanoparticles Flux and Internal Heat Generation

Author(s):  
Chuo-Jeng Huang ◽  
Kuo-Ann Yih

Abstract This study used numerical analysis to investigate the effects of nonlinear radiation and variable viscosity on free convection of a power-law nanofluid over a vertical truncated cone in porous media with Rosseland diffusion approximation considering zero nanoparticles flux and internal heat generation. The internal heat generation is of an exponential decaying form and the viscosity of the fluid is assumed to follow Reynolds viscosity model. The surface boundary conditions of vertical truncated cone is maintained at the uniform wall temperature (UWT) and the zero nanoparticle flux (ZNF) to cause the results to be more realistic and useful. The nanofluid model considered the effects of Brownian motion and thermophoresis. The nonsimilar governing equations are obtained by using a suitable coordinate transformation and then solved by Keller box method (KBM). Comparisons with previously published work obtained good agreement. Graphical and tabular presentations of numerical data for the dimensionless temperature profile and the local Nusselt number were presented for main parameters: dimensionless streamwise coordinate, thermophoresis parameter, Lewis number, radiation parameter, surface temperature parameter, viscosity parameter, power-law index of the non-Newtonian fluid, and internal heat generation coefficient. The local Nusselt number increased when the following parameters were increased: radiation parameter, surface temperature parameter, viscosity parameter, power-law index of the non-Newtonian fluid, and dimensionless streamwise coordinate. In contrast, the local Nusselt number decreased when the following parameters were increased: internal heat generation coefficient, thermophoresis parameter, and Lewis number. Besides, the physical aspects of the problem are discussed in details.

Author(s):  
Basma Souayeh ◽  
Najib Hdhiri

Researchers in heat transfer field always attempt to find new solutions to optimize the performance of energy devices through heat transfer enhancement. Among various methods which are implemented to reinforce the thermal performance of energy systems, one is utilizing porous media in heat exchangers. In this study, characteristics of laminar mixed convection in a porous two-sided lid-driven square cavity induced by an internal heat generation at the bottom wall have been carried out by using a numerical methodology based on the finite volume method and the full multigrid acceleration. The two-sided and top walls of the enclosure are assumed to have cold temperature while the remaining walls of the bottom wall are insulated. The working fluid is air so that the Prandtl number equates 0.71. The behavior of different physical parameters is shown graphically so that computations have been conducted over a wide range of pertinent parameters; (10[Formula: see text] Ri [Formula: see text]), Darcy number ([Formula: see text] Da [Formula: see text]), internal Rayleigh number ([Formula: see text] Ra[Formula: see text]), the porosity ([Formula: see text]) and the Grashof number (10[Formula: see text] Gr [Formula: see text]). Results revealed that heat transfer mechanism and the flow characteristics inside the enclosure are strongly dependent on the Grashof number. For instance, the best heat transfer rates at the considered values of internal Rayleigh numbers are obtained for a high Grashof number. Furthermore, an increase of internal heat generation (RaI) leads to a higher flow and temperature intensities for Grashof numbers ranging from [Formula: see text] to [Formula: see text] and a specific Richardson number value. Besides, an increase in porosity values ([Formula: see text]) leads to an obvious decrease in the average Nusselt number. Maximum temperature [Formula: see text] is optimal for high ([Formula: see text]) value. A correlation expression for the average Nusselt number relative to the internal heat source was established in function of two control parameters such as Darcy and Richardson numbers.


1970 ◽  
Vol 40 (1) ◽  
pp. 22-28 ◽  
Author(s):  
Tamanna Sultana ◽  
Sumon Saha ◽  
Mohammad Mansur Rahman ◽  
Goutam Saha

Heat transfer in a porous medium over a stretching surface with internal heat generation and suction or injection has been analyzed numerically in the presence of radiation. In this analysis, the governing equations are transformed into a system of ordinary differential equations and solved them numerically using Nachtsheim-Swigert shooting iteration technique. The local similarity solutions for the flow and the heat transfer characteristics are presented graphically for various material parameters entering into the problem. The effects of the pertinent parameters on the local skin friction coefficient (viscous drag) and the Nusselt number (rate of heat transfer) are also displayed graphically. Keywords: Internal heat generation, suction, injection, radiation, Nusselt number.   doi: 10.3329/jme.v40i1.3469   Journal of Mechanical Engineering, Vol. ME40, No. 1, June 2009 22-28


Sign in / Sign up

Export Citation Format

Share Document