Experimental Study of NMP Sample and Hold Input Using an Inverted Pendulum

2018 ◽  
Author(s):  
Yingxu Wang ◽  
Guoming G. Zhu ◽  
Ranjan Mukherjee
Keyword(s):  
Discrete Time ◽  
Continuous Time ◽  
Inverted Pendulum ◽  
Linear Quadratic Regulator ◽  
Sampling Period ◽  
Minimum Phase ◽  
Discrete Time System ◽  
Linear Quadratic ◽  
Sample And Hold ◽  
Control Configuration

Early research showed that a zero-order hold is able to convert a continuous-time non-minimum-phase (NMP) system to a discrete-time minimum-phase (MP) system with a sufficiently large sampling period. However the resulting sample period is often too large to adequately cover the original NMP system dynamics and hence not suitable for control application to take advantage of a discrete-time MP system. This problem was solved using different sample and hold inputs (SHI) to reduce the sampling period significantly for MP discrete-time system. Three SHIs were studied analytically and they are square pulse, forward triangle and backward triangle SHIs. To validate the finding experimentally, a dual-loop linear quadratic regulator (LQR) control configuration is designed for the Quanser single inverted pendulum (SIP) system, where the SIP system is stabilized using the Quanser continuous-time LQR (the first loop) and an additional discrete-time LQR (the second loop) with the proposed SHIs to reduce the cart oscillation. The experimental results show more than 75% reduction of the steady-state cart displacement variance over the single-loop Quanser controller and hence demonstrated the effectiveness of the proposed SHI.

Optimal Mini Segway Control Using Non-Minimum Phase Sample and Hold Input

2019 ◽  
Author(s):  
Yingxu Wang ◽  
Guoming G. Zhu
Keyword(s):  
Discrete Time ◽  
Continuous Time ◽  
System Performance ◽  
Low Cost ◽  
Sampling Period ◽  
High Gain ◽  
Minimum Phase ◽  
Discrete Time System ◽  
Loop Control ◽  
Sample And Hold

Abstract Our early work shows the reduction of feasible sampling period when sample and hold inputs (SHI) are used to convert a continuous-time non-minimum phase (NMP) system to a discrete-time minimum phase (MP) system, comparing to conventional zero-order hold. Consequently, high-gain discrete-time controllers can be designed and used to improve continuous-time NMP system performance since the resulting discrete-time system is MP. This paper demonstrates the performance improvements of a mini Segway robot through experiments utilizing a dual-loop control architecture. An inner-loop continuous-time controller stabilizes the mini Segway robot and the outer-loop discrete-time controller, designed based on the discrete-time MP system, is used to improve the overall system performance. Experimental results show that the mini Segway cart oscillation magnitudes are significantly reduced and its stability is also improved. This study also confirms the feasibility of implementing the SHI into a low cost microcontroller such as Arduino. That is, the additional computational load of SHIs is minimal.

Robust stabilization control of a spatial inverted pendulum using integral sliding mode controller

2020 ◽  
Vol 0 (0) ◽  
Author(s):  
Ishan Chawla ◽  
Vikram Chopra ◽  
Ashish Singla
Keyword(s):  
Inverted Pendulum ◽  
Sliding Mode ◽  
Robust Stabilization ◽  
Linear Quadratic Regulator ◽  
Humanoid Robots ◽  
Sliding Mode Controller ◽  
Linear Quadratic ◽  
Integral Sliding Mode ◽  
Wide Range ◽  
Lqr Controller

AbstractFrom the last few decades, inverted pendulums have become a benchmark problem in dynamics and control theory. Due to their inherit nature of nonlinearity, instability and underactuation, these are widely used to verify and implement emerging control techniques. Moreover, the dynamics of inverted pendulum systems resemble many real-world systems such as segways, humanoid robots etc. In the literature, a wide range of controllers had been tested on this problem, out of which, the most robust being the sliding mode controller while the most optimal being the linear quadratic regulator (LQR) controller. The former has a problem of non-robust reachability phase while the later lacks the property of robustness. To address these issues in both the controllers, this paper presents the novel implementation of integral sliding mode controller (ISMC) for stabilization of a spatial inverted pendulum (SIP), also known as an x-y-z inverted pendulum. The structure has three control inputs and five controlled outputs. Mathematical modeling of the system is done using Euler Lagrange approach. ISMC has an advantage of eliminating non-robust reachability phase along with enhancing the robustness of the nominal controller (LQR Controller). To validate the robustness of ISMC to matched uncertainties, an input disturbance is added to the nonlinear model of the system. Simulation results on two different case studies demonstrate that the proposed controller is more robust as compared to conventional LQR controller. Furthermore, the problem of chattering in the controller is dealt by smoothening the controller inputs to the system with insignificant loss in robustness.

Stability of real-time hybrid simulation involving time-varying delay and direct integration algorithms

2021 ◽  
pp. 107754632110016
Author(s):  
Liang Huang ◽  
Cheng Chen ◽  
Shenjiang Huang ◽  
Jingfeng Wang
Keyword(s):  
Real Time ◽  
Discrete Time ◽  
Continuous Time ◽  
Hybrid Simulation ◽  
Time Varying ◽  
Discrete Time System ◽  
Time System ◽  
Integration Algorithms ◽  
The Stability ◽  
Continuous Time System

Stability presents a critical issue for real-time hybrid simulation. Actuator delay might destabilize the real-time test without proper compensation. Previous research often assumed real-time hybrid simulation as a continuous-time system; however, it is more appropriately treated as a discrete-time system because of application of digital devices and integration algorithms. By using the Lyapunov–Krasovskii theory, this study explores the convoluted effect of integration algorithms and actuator delay on the stability of real-time hybrid simulation. Both theoretical and numerical analysis results demonstrate that (1) the direct integration algorithm is preferably used for real-time hybrid simulation because of its computational efficiency; (2) the stability analysis of real-time hybrid simulation highly depends on actuator delay models, and the actuator model that accounts for time-varying characteristic will lead to more conservative stability; and (3) the integration step is constrained by the algorithm and structural frequencies. Moreover, when the step is small, the stability of the discrete-time system will approach that of the corresponding continuous-time system. The study establishes a bridge between continuous- and discrete-time systems for stability analysis of real-time hybrid simulation.

Stabilizing and Swinging-Up the Inverted Pendulum Using PI and PID Controllers Based on Reduced Linear Quadratic Regulator Tuned by PSO

2015 ◽  
Vol 4 (4) ◽  
pp. 52-69 ◽  
Author(s):  
M. E. Mousa ◽  
M. A. Ebrahim ◽  
M. A. Moustafa Hassan
Keyword(s):  
Pid Controller ◽  
Inverted Pendulum ◽  
Research Work ◽  
Linear Quadratic Regulator ◽  
Nonlinear Problems ◽  
Pid Controllers ◽  
Linear Quadratic ◽  
Swarm Optimization ◽  
Feed Forward ◽  
Forward Gain

The inherited instabilities in the Inverted Pendulum (IP) system make it one of the most difficult nonlinear problems in the control theory. In this research work, Proportional –Integral and Derivative (PID) Controller with a feed forward gain is used with Reduced Linear Quadratic Regulator (RLQR) for stabilizing the Cart Position and Swinging-up the Pendulum angle. Tuning the Controllers' gains is achieved by using Particle Swarm Optimization (PSO) Technique. Obtaining the combined PID controllers' gains with a feed forward gain and RLQR is a multi-dimensions control problem. The Proposed Controllers give minimum Settling Time, Rise Time, Undershoot and Over shoot for both the Cart Position and the Pendulum angle. A disturbance with different amplitudes is applied to the system, and the results showed the robustness of the systems based on the tuned controllers. The overall results are promising.

scholarly journals Design of hybrid sliding mode controller based on fireworks algorithm for nonlinear inverted pendulum systems

2017 ◽  
Vol 9 (1) ◽  
pp. 168781401668427 ◽  
Author(s):  
Te-Jen Su ◽  
Shih-Ming Wang ◽  
Tsung-Ying Li ◽  
Sung-Tsun Shih ◽  
Van-Manh Hoang
Keyword(s):  
Inverted Pendulum ◽  
Sliding Mode ◽  
Linear Quadratic Regulator ◽  
Sliding Mode Controller ◽  
Proportional Integral Derivative ◽  
Linear Quadratic ◽  
Pendulum System ◽  
Fireworks Algorithm ◽  
Simulation Process ◽  
Inverted Pendulum System

The objective of this article is to optimize parameters of a hybrid sliding mode controller based on fireworks algorithm for a nonlinear inverted pendulum system. The proposed controller is a combination of two modified types of the classical sliding mode controller, namely, baseline sliding mode controller and fast output sampling discrete sliding mode controller. The simulation process is carried out with MATLAB/Simulink. The results are compared with a published hybrid method using proportional–integral–derivative and linear quadratic regulator controllers. The simulation results show a better performance of the proposed controller.

Real-Time Control of a Rotary Inverted Pendulum using Robust LQR-based ANFIS Controller

2018 ◽  
Vol 19 (3-4) ◽  
pp. 379-389 ◽  
Author(s):  
Ishan Chawla ◽  
Ashish Singla
Keyword(s):  
Fuzzy Inference System ◽  
Inverted Pendulum ◽  
Fuzzy Inference ◽  
Sliding Mode ◽  
Linear Quadratic Regulator ◽  
Linear Quadratic ◽  
Inference System ◽  
Wide Range ◽  
Lqr Controller ◽  
Rotary Inverted Pendulum

AbstractFrom the last five decades, inverted pendulum (IP) has been considered as a benchmark problem in the control literature due to its inherit nature of instability, non-linearity and underactuation. Its applicability in wide range of practical systems, demands the need of a robust controller. It is found in the literature that wide range of controllers had been tested on this problem, out of which the most robust being sliding mode controller while the most optimal being linear quadratic regulator (LQR) controller. The former has a problem of discontinuity and chattering, while the latter lacks the property of robustness. To address the robustness issue in LQR controller, this paper proposes a novel robust LQR-based adaptive neural based fuzzy inference system controller, which is a hybrid of LQR and fuzzy inference system. The proposed controller is designed and implemented on rotary inverted pendulum. Further, to validate the robustness of proposed controller to parametric uncertainties, pendulum mass is varied. Simulation and experimental results show that as compared to LQR controller, the proposed controller is robust to variations in pendulum mass and has shown satisfactory performance.

Hybrid Optimization Technique for Enhancing the Stability of Inverted Pendulum System

2021 ◽  
Vol 12 (1) ◽  
pp. 77-97
Author(s):  
M. E. Mousa ◽  
M. A. Ebrahim ◽  
Magdy M. Zaky ◽  
E. M. Saied ◽  
S. A. Kotb
Keyword(s):  
Inverted Pendulum ◽  
Optimization Technique ◽  
Linear Quadratic Regulator ◽  
Variable Structure ◽  
Grey Wolf Optimizer ◽  
Linear Quadratic ◽  
Pendulum System ◽  
Inverted Pendulum System ◽  
New Variant ◽  
The Stability

The inverted pendulum system (IPS) is considered the milestone of many robotic-based industries. In this paper, a new variant of variable structure adaptive fuzzy (VSAF) is used with new reduced linear quadratic regulator (RLQR) and feedforward gain for enhancing the stability of IPS. The optimal determining of VSAF parameters as well as Q and R matrices of RLQR are obtained by using a modified grey wolf optimizer with adaptive constants property via particle swarm optimization technique (GWO/PSO-AC). A comparison between the hybrid GWO/PSO-AC and classical GWO/PSO based on multi-objective function is provided to justify the superiority of the proposed technique. The IPS equipped with the hybrid GWO/PSO-AC-based controllers has minimum settling time, rise time, undershoot, and overshoot results for the two system outputs (cart position and pendulum angle). The system is subjected to robustness tests to ensure that the system can cope with small as well as significant disturbances.

Design and Analysis of Linear Quadratic Regulator for a Non-Linear Positioning System

2015 ◽  
Vol 761 ◽  
pp. 227-232 ◽  
Author(s):  
Tang Teng Fong ◽  
Zamberi Jamaludin ◽  
Ahmad Yusairi Bani Hashim ◽  
Muhamad Arfauz A. Rahman
Keyword(s):  
Physical System ◽  
Inverted Pendulum ◽  
Linear Quadratic Regulator ◽  
Upright Position ◽  
System Model ◽  
Optimum Control ◽  
Control Vector ◽  
Linear Quadratic ◽  
Non Linear ◽  
Lqr Controller

The control of rotary inverted pendulum is a case of classical robust controller design of non-linear system applications. In the control system design, a precise system model is a pre-requisite for an enhanced and optimum control performance. This paper describes the dynamic system model of an inverted pendulum system. The mathematical model was derived, linearized at the upright equilibrium points and validated using non-linear least square frequency domain identification approach based on measured frequency response function of the physical system. Besides that, a linear quadratic regulator (LQR) controller was designed as the balancing controller for the pendulum. An extensive analysis was performed on the effect of the weighting parameter Q on the static time of arm, balance time of pendulum, oscillation, as well as, response of arm and pendulum, in order to determine the optimum state-feedback control vector, K. Furthermore, the optimum control vector was successfully applied and validated on the physical system to stabilize the pendulum in its upright position. In the experimental validation, the LQR controller was able to keep the pendulum in its upright position even in the presence of external disturbance forces.

Sign in / Sign up

Export Citation Format

Share Document