Experimental Investigation of Thermal Storage Processes in a Thermocline Storage Tank

2011 ◽  
Author(s):  
Wafaa Karaki ◽  
Peiwen Li ◽  
Jon Van Lew ◽  
M. M. Valmiki ◽  
Cholik Chan ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Experimental Data ◽  
Storage Tank ◽  
Power Plants ◽  
Thermal Power ◽  
Energy Charge ◽  
Thermal Storage ◽  
Packed Bed ◽  
Heat Transfer Fluid ◽  
Energy Storage Efficiency

This paper presents an experimental study and analysis of the heat transfer of energy charge and discharge in a packed-bed thermocline thermal storage tank for application in concentrated solar thermal power plants. Because the energy storage efficiency is a function of many parameters including fluid and solid properties, tank dimensions, packing dimensions, and time lengths of charge and discharge, this paper aims to provide experimental data and a proper approach of data reduction and presentation. To accomplish this goal, dimensionless governing equations of energy conservation in the heat transfer fluid and solid packed-bed material are derived. The obtained experimental data will provide a basis for validation of mathematical models in the future.

Longer Passage of Airflow in Multiple Packed-Bed Thin Tanks Versus in a Short Big Tank for Improved Thermal Storage Performance

2018 ◽  
Author(s):  
Yan Wang ◽  
Peiwen Li ◽  
Zhifeng Wang ◽  
Bei Yang ◽  
Guofeng Yuan ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Storage System ◽  
Thermal Power ◽  
Thermal Storage ◽  
Packed Bed ◽  
Heat Transfer Fluid ◽  
Storage Efficiency ◽  
Storage Material ◽  
Solar Thermal Power ◽  
Storage Performance

A very challenging issue about solar thermal power generation is the use of a high temperature heat transfer fluid (water, oils, or molten salts) for heat transfer and thermal storage material, which may freeze at night or cold weather. When choosing air as the heat transfer fluid, the problem of freezing is eliminated. In order to increase the performance of thermal storage system which uses air as the heat transfer fluid passing through a packed bed (by ceramic spheres of Al2O3), multiple small-diameter tanks are considered to replace a single large-diameter tank with the same packed-bed volume and airflow rate in this paper. Analysis about the thermal storage performance in a short big tank and in cascade thin tanks has been made for comparison. A long passage of airflow and faster flow speed of air in the cascade thin tanks has been found significantly beneficial to thermal storage. Results about the increased thermal storage performance and increased pressure loss will be presented. Longer passage of airflow made it possible to have a longer time of high temperature of outflow air during discharging period. And faster speed of the fluid enhanced the heat transfer between air and thermal storage material. The total effective energy and thermal storage efficiency of cascade thin-tank thermal energy storage (TES) are higher. The thermal storage efficiency in the two types of thermal storage arrangement was compared for optimal design. The obtained results are of great significance to the development of using air as heat transfer fluid and rocks or ceramic spheres as the thermal storage material for thermal storage system in concentrated solar thermal power plants.

The Benefit of Using Multiple Thin Tanks Versus a Short Big Tank for Thermal Storage in Ceramic-Sphere Packed Bed With Airflow

2019 ◽  
Vol 142 (2) ◽  
Author(s):  
Yan Wang ◽  
Peiwen Li ◽  
Zhifeng Wang ◽  
Bei Yang ◽  
Guofeng Yuan
Keyword(s):  
Heat Transfer ◽  
Storage System ◽  
Large Diameter ◽  
Small Diameter ◽  
Operation Time ◽  
Thermal Storage ◽  
Packed Bed ◽  
Heat Transfer Fluid ◽  
Optimization Methodology ◽  
Energy Storage Efficiency

Abstract To make a better thermal storage system that uses air as the heat transfer fluid flowing through a packed-bed of ceramic spheres (Al2O3) as thermal storage materials, the present work studied cases using multiple small-diameter thin tanks to replace a large-diameter big tank while keeping the same total volume and the same air flow rate. Performance analysis of thermal storage has been conducted for comparison and optimization. The long flow passage and faster flow velocity of air in the small-diameter tanks was found to significantly benefit thermal storage performance compared with that of a short big tank. It resulted in a longer duration of discharge of high-temperature airflow, if the same operation time is applied to the two situations. The faster airflow enhances the heat transfer between air and thermal storage material, although it incurs larger pressure loss. Overall, the energy storage efficiency of using several thin tanks can be significantly better than that of using a big short tank if the height-to-diameter ratio in the multiple thin tanks is properly optimized. The optimization methodology and results are of great significance to the development of thermal storage systems that use air as heat transfer fluid and rocks or ceramic spheres as the packed-bed material for thermal storage.

Experimental Investigation of Thermal Storage Processes in a Thermocline Tank

2012 ◽  
Vol 134 (4) ◽  
Author(s):  
M. M. Valmiki ◽  
Wafaa Karaki ◽  
Peiwen Li ◽  
Jon Van Lew ◽  
Cholik Chan ◽  
...  
Keyword(s):  
Mathematical Analysis ◽  
Power Plants ◽  
Large Scale ◽  
Thermal Power ◽  
Energy Charge ◽  
Thermal Storage ◽  
Packed Bed ◽  
Filler Material ◽  
Laboratory System ◽  
Material System

This paper presents an experimental study of the energy charge and discharge processes in a packed bed thermocline thermal storage tank for application in concentrated solar power plants. A mathematical analysis was provided for better understanding and planning of the experimental tests. The mathematical analysis indicated that the energy storage effectiveness is related to fluid and solid material properties, tank dimensions, packing schemes of the solid filler material, and the durations of the charge and discharge times. Dimensional analysis of the governing equations was applied to consolidate many parameters into a few dimensionless parameters, allowing scaling from a laboratory system to an actual industrial application. Experiences on the system design, packing of solid filler material, system operation, and data analysis in a laboratory-scale system have been obtained in this work. These data are used to validate a recently published numerical solution method. The study will benefit the application of thermocline thermal storage systems in the large scale concentrated solar thermal power plants in industry.

scholarly journals Review of solid particle materials for heat transfer fluid and thermal energy storage in solar thermal power plants

2019 ◽  
Vol 1 (4) ◽  
Author(s):  
Alejandro Calderón ◽  
Camila Barreneche ◽  
Anabel Palacios ◽  
Mercè Segarra ◽  
Cristina Prieto ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Energy Storage ◽  
Solid Particle ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Power Plants ◽  
Thermal Power ◽  
Heat Transfer Fluid ◽  
Thermal Power Plants ◽  
Solar Thermal Power

scholarly journals Fabrication and Performance Evaluation of Cold Thermal Energy Storage Tanks Operating in Water Chiller Air Conditioning System

Energies ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 4159
Author(s):  
Xuan Vien Nguyen
Keyword(s):  
Heat Transfer ◽  
Cold Storage ◽  
Storage Tank ◽  
Air Conditioning ◽  
Thermal Storage ◽  
Hot Water ◽  
Operating Costs ◽  
Heat Transfer Fluid ◽  
Storage Tanks ◽  
Air Conditioning System

In this study, cold and thermal storage systems were designed and manufactured to operate in combination with the water chiller air-conditioning system of 105.5 kW capacity, with the aim of reducing operating costs and maximizing energy efficiency. The cold storage tank used a mixture of water and 10 wt.% glycerin as a phase-change material (PCM), while water was used as heat transfer fluid (HTF). The cold storage heat exchanger was made of polyvinyl chloride (PVC). On the other hand, the thermal storage tank used water as the storage fluid with a capacity of 50 L of hot water per hour. The thermal storage did not use a pump for water transfer through the heat exchanger, so as to save energy and operating costs. In this paper, the operating parameters of the cold and thermal storage tanks are shown according to the results of experimental research, including the temperatures of cooling and heating load, heat transfer fluid, and cold storage material during the discharge process, as well as the discharge duration. The system assisted the air conditioner in cooling the internship workshop space at the university with an area of 400 m2, contributing to a remarkable reduction in air-conditioning system operating costs during the daytime. Furthermore, the system recovered waste heat from the compressor of the water chiller, and a thermal storage system was successfully built and operated, providing 50 L of hot water at a temperature of 60 °C per hour to serve the everyday needs of school students. This design was suitable for the joint operation of cold and thermal storage tanks and the water chiller air-conditioning system for cooling and heating applications.

scholarly journals High-Temperature Chloride-Carbonate Phase Change Material: Thermal Performances and Modelling of a Packed Bed Storage System for Concentrating Solar Power Plants

Energies ◽  
2021 ◽  
Vol 14 (17) ◽  
pp. 5339
Author(s):  
Giovanni Salvatore Sau ◽  
Valerio Tripi ◽  
Anna Chiara Tizzoni ◽  
Raffaele Liberatore ◽  
Emiliana Mansi ◽  
...  
Keyword(s):  
Heat Exchanger ◽  
Heat Exchange ◽  
Phase Change ◽  
Power Plants ◽  
Solar Power ◽  
Storage System ◽  
Ternary Eutectic ◽  
Thermal Storage ◽  
Packed Bed ◽  
Heat Transfer Fluid

Molten salts eutectics are promising candidates as phase change materials (PCMs) for thermal storage applications, especially considering the possibility to store and release heat at high temperatures. Although many compounds have been proposed for this purpose in the scientific literature, very few data are available regarding actual applications. In particular, there is a lack of information concerning thermal storage at temperatures around 600 °C, necessary for the coupling with a highly efficient Rankine cycle powered by concentrated solar power (CSP) plants. In this contest, the present work deals with a thermophysical behavior investigation of a storage heat exchanger containing a cost-effective and safe ternary eutectic, consisting of sodium chloride, potassium chloride, and sodium carbonate. This material was preliminarily and properly selected and characterized to comply with the necessary melting temperature and latent enthalpy. Then, an indirect heat exchanger was considered for the simulation, assuming aluminum capsules to confine the PCM, thus obtaining the maximum possible heat exchange surface and air at 5 bar as heat transfer fluid (HTF). The modelling was carried out setting the inlet and outlet air temperatures at, respectively, 290 °C and 550 °C, obtaining a realistic storage efficiency of around 0.6. Finally, a conservative investment cost was estimated for the storage system, demonstrating a real possible economic benefit in using these types of materials and heat exchange geometries, with the results varying, according to possible manufacturing prices, in a range from 25 to 40 EUR/kWh.

scholarly journals Thermophysical properties experimentally tested for NaCl-KCl-MgCl2 eutectic molten salt as a next generation high temperature HTF in CSP systems

2020 ◽  
pp. 1-13
Author(s):  
Xiaoxin Wang ◽  
Jusus Rincon ◽  
Peiwen Li ◽  
Youyang Zhao ◽  
Judith Vidal
Keyword(s):  
Heat Transfer ◽  
High Temperature ◽  
Power Systems ◽  
Molten Salt ◽  
Thermophysical Properties ◽  
Power Plants ◽  
Solar Power ◽  
Thermal Power ◽  
Thermal Storage ◽  
Heat Of Fusion

Abstract A new eutectic chloride molten salt, MgCl2-KCl-NaCl (wt.% 45.98-38.91-15.11), has been recognized as one of the most promising high-temperature heat-transfer fluids (HTF) for both heat transfer and thermal storage for the 3rd Generation concentrated solar thermal power (CSP) systems. For the first time, some essential thermophysical properties of this eutectic chloride molten salt needed for basic heat transfer and energy storage analysis in the application of concentrating solar power systems have been experimentally tested and provided as functions of temperature in the range from 450 °C to 700 °C. The studied properties include heat capacity, melting point, heat of fusion, viscosity, vapor pressure, density, and thermal conductivity. The property equations provide essential database for engineers to use to calculate convective heat transfer in concentrated solar receivers, heat exchangers, and thermal storage for concentrated solar power plants.

scholarly journals Experimental Study on Temperature Distribution and Heat Losses of a Molten Salt Heat Storage Tank

Energies ◽  
2019 ◽  
Vol 12 (10) ◽  
pp. 1943 ◽  
Author(s):  
Xiaoming Zhang ◽  
Yuting Wu ◽  
Chongfang Ma ◽  
Qiang Meng ◽  
Xiao Hu ◽  
...  
Keyword(s):  
Temperature Distribution ◽  
Molten Salt ◽  
Storage Tank ◽  
Power Plants ◽  
Heat Storage ◽  
Thermal Power ◽  
Thermal Storage ◽  
Heat Losses ◽  
Temperature Stratification ◽  
Maximum Temperature

Two-tank molten salt heat storage systems are considered to be the most mature thermal storage technology in solar thermal power plants. As the key part of the system, the thermal performance of molten salt tanks is of great importance. An experimental thermal storage system with a new type of molten salt as a thermal energy storage medium has been built to investigate the temperature distribution of molten salt inside the tank during the cooling process from 550 °C to 180 °C. The temperature distribution of the salt was obtained, which reveals that temperature stratification appears at the bottom of the tank within the height of 200 mm. The position, with the maximum temperature difference of 16.1 °C, is at the lower edges of the molten salt storage tank. The temperature distribution was also measured to deepen our understanding of the insulation foundation, which shows that the maximum temperature appears at the middle upper part of the foundation and decreases radially. The heat losses of the molten salt tank were calculated by the classical equation, from which it was found that the heat loss decreases from 3.65 kWh to 1.82 kWh as the temperature of the molten salt drops from 550 °C to 310 °C. The effect of temperature stratification on the heat losses of the tank’s bottom was also analyzed.

Sign in / Sign up

Export Citation Format

Share Document