Modeling of a Hybrid Renewable Energy System “HyRES”

Volume 4 ◽  
2004 ◽  
Author(s):  
K. Altaii ◽  
A. Bradway ◽  
A. M. Al-Jumaily

This paper presents the modeling and simulation of a hybrid renewable-energy system. The sizing, availability, and contribution of solar photovoltaic, wind energy and hydro energy can be simulated to determine the viability, stability, and cost effectiveness of such systems. The model allows the user to enter site specific data (hourly, daily, monthly, and annually) such as solar radiation, wind speed and precipitation. Users can select the type and size of wind turbine, hydroelectric turbine, photovoltaic panel and the electrical load placed on the hybrid renewable system. The simulation will determine the total power that can be produced on an hourly, daily, monthly and annual basis, the optimum combination of renewable energies, and usage/storage of each type of renewable energies, given the specified system and the collected data. With the help of HyRES, the model, one can determine which hybrid renewable energy system would best suit a specific site, and also help to determine which type of wind turbine, hydroelectric turbine, or photovoltaic panels would best complement each other for that site.

Energies ◽  
2021 ◽  
Vol 14 (6) ◽  
pp. 1595
Author(s):  
Piotr Gajewski ◽  
Krzysztof Pieńkowski

The aim of the paper is the study of the Hybrid Renewable Energy System, which is consisted of two types of renewable energy systems (wind and sun) and is combined with storage energy system (battery). The paper presents the classification and review of architectures of Hybrid Renewable Energy Systems. The considered Hybrid Renewable Energy System was designed as a multi-converter system with gearless Wind Turbine driven Permanent Magnet Synchronous Generator and with a Photovoltaic Array and Battery Energy System. The mathematical models of individual elements of a complex Hybrid Renewable Energy System were described. In the control of both systems of Wind Turbine with Permanent Magnet Synchronous Generator and Photovoltaic array, the algorithms of Maximum Power Point Tracking have been implemented for higher efficiency of energy conversion. The energy storage in the battery has been managed by the control system of a bidirectional DC/DC converter. For the control of the Machine Side Converter and Wind Turbine with Permanent Magnet Synchronous Generator, the vector control method has been implemented. In the control system of the Grid Side Converter, the advanced method of Direct Power Control has been applied. The energy management strategies for optimal flows of electrical energy between individual systems of considered hybrid renewable energy system are developed and described. In order to determine the operation of proposed control systems, the simulation studies have been performed for different conditions of operation of individual elements of the complex hybrid system. The considered control methods and energy management strategies were tested thorough simulation studies for different wind speed variations, different sun irradiations, and different local load demands. The performed simulations are of practical importance in terms of proper operation requirements, design selection of components and energy management of Hybrid Renewable Energy Systems.


2021 ◽  
Vol 6 (1) ◽  
pp. 145-167
Author(s):  
Ridha Benadli ◽  
Marwen Bjaoui ◽  
Brahim Khiari ◽  
Anis Sellami

Abstract This paper studies innovative application of sliding mode control (SMC) for a Hybrid Renewable Energy System (HRES) in grid-connected and autonomous modes of operation. The considered HRES includes a photovoltaic (PV), wind turbine (WT) based on a Permanent Magnet Synchronous Generator (PMSG). The PV generator is coupled to the common DC bus via a DC/DC converter. The latter is controlled by an MPPT algorithm based on the Adaptive Perturbation and Observation Algorithm Method (APOAM) to search the optimum working of this source. A SMC is utilized to manage the PV voltage to achieve the Maximum Power Point (MPP) by altering the obligation duty cycle. The battery interfaced by a bidirectional buck-boost DC/DC converter can be charged or discharged depending on the production situation. On the one hand, the wind turbine conversion chain is equipped with a PMSG and a rectifier controlled to regulate the operating point of the wind turbine to its optimum value. During a Stand-Alone Mode (SAM) operation, the Voltage Source Converter (VSC) was used for controlling the output voltage in terms of amplitude and frequency delivered to the AC load. However, in Grid-Connected Mode (GCM) operation, the VSC was adapted to control the electrical parameters of the grid. To better appreciate the advantages of the proposed SMC approach, we have proposed a series of comparative tests with the conventional PI control in the operating modes GC and SA and under different scenarios. The proposed control strategy has undeniable advantages in terms of control performance and very low total harmonic distortion THD value compared with the conventional PI control. Finally, It is concluded that the proposed approach improves the quality and provides a stable operation of the HRES.


Sign in / Sign up

Export Citation Format

Share Document