RANS Predictions in an Idealized Lower-Plenum Model

Author(s):  
Joshua D. Hodson ◽  
Robert E. Spall ◽  
Barton L. Smith

The two-dimensional, unsteady, Reynolds-averaged Navier-Stokes equations have been solved for the flow across a row of confined cylinders with a pitch-to-diameter ratio of 1.7, a configuration which was designed to model a next generation nuclear plant lower-plenum. Four different turbulence models were used: k–ε, k–ω, v2–f, and differential Reynolds-stress transport. Comparisons with available experimental data were made for pressure losses, recirculation lengths, and mean velocity profiles. The results indicate that all models did a reasonable job of predicting the pressure loss coefficient. However, in terms of the mean velocities and recirculation length, the determination of which model performed best is not clear.

2001 ◽  
Vol 123 (2) ◽  
pp. 401-406 ◽  
Author(s):  
Elgin A. Anderson ◽  
Robert E. Spall

The flowfield of dual, parallel planar turbulent jets is investigated experimentally using an x-type hot-wire probe and numerically by solving the Reynolds-averaged Navier-Stokes equations. The performance of both differential Reynolds stress (RSM) and standard k-ε turbulence models is evaluated. Results show that the numerical models predict the merge and combined point characteristics to good accuracy. However, both turbulence models show a narrower width of the jet envelope than measured by experiment. The predicted profiles of the mean velocity along the symmetry plane agree well with the experimental results.


2013 ◽  
Vol 734 ◽  
pp. 275-316 ◽  
Author(s):  
Rashad Moarref ◽  
Ati S. Sharma ◽  
Joel A. Tropp ◽  
Beverley J. McKeon

AbstractWe study the Reynolds-number scaling and the geometric self-similarity of a gain-based, low-rank approximation to turbulent channel flows, determined by the resolvent formulation of McKeon & Sharma (J. Fluid Mech., vol. 658, 2010, pp. 336–382), in order to obtain a description of the streamwise turbulence intensity from direct consideration of the Navier–Stokes equations. Under this formulation, the velocity field is decomposed into propagating waves (with single streamwise and spanwise wavelengths and wave speed) whose wall-normal shapes are determined from the principal singular function of the corresponding resolvent operator. Using the accepted scalings of the mean velocity in wall-bounded turbulent flows, we establish that the resolvent operator admits three classes of wave parameters that induce universal behaviour with Reynolds number in the low-rank model, and which are consistent with scalings proposed throughout the wall turbulence literature. In addition, it is shown that a necessary condition for geometrically self-similar resolvent modes is the presence of a logarithmic turbulent mean velocity. Under the practical assumption that the mean velocity consists of a logarithmic region, we identify the scalings that constitute hierarchies of self-similar modes that are parameterized by the critical wall-normal location where the speed of the mode equals the local turbulent mean velocity. For the rank-1 model subject to broadband forcing, the integrated streamwise energy density takes a universal form which is consistent with the dominant near-wall turbulent motions. When the shape of the forcing is optimized to enforce matching with results from direct numerical simulations at low turbulent Reynolds numbers, further similarity appears. Representation of these weight functions using similarity laws enables prediction of the Reynolds number and wall-normal variations of the streamwise energy intensity at high Reynolds numbers (${Re}_{\tau } \approx 1{0}^{3} {\unicode{x2013}} 1{0}^{10} $). Results from this low-rank model of the Navier–Stokes equations compare favourably with experimental results in the literature.


1999 ◽  
Vol 379 ◽  
pp. 1-22 ◽  
Author(s):  
MARTIN OBERLACK

The Lie group approach developed by Oberlack (1997) is used to derive new scaling laws for high-Reynolds-number turbulent pipe flows. The scaling laws, or, in the methodology of Lie groups, the invariant solutions, are based on the mean and fluctuation momentum equations. For their derivation no assumptions other than similarity of the Navier–Stokes equations have been introduced where the Reynolds decomposition into the mean and fluctuation quantities has been implemented. The set of solutions for the axial mean velocity includes a logarithmic scaling law, which is distinct from the usual law of the wall, and an algebraic scaling law. Furthermore, an algebraic scaling law for the azimuthal mean velocity is obtained. In all scaling laws the origin of the independent coordinate is located on the pipe axis, which is in contrast to the usual wall-based scaling laws. The present scaling laws show good agreement with both experimental and DNS data. As observed in experiments, it is shown that the axial mean velocity normalized with the mean bulk velocity um has a fixed point where the mean velocity equals the bulk velocity independent of the Reynolds number. An approximate location for the fixed point on the pipe radius is also given. All invariant solutions are consistent with all higher-order correlation equations. A large-Reynolds-number asymptotic expansion of the Navier–Stokes equations on the curved wall has been utilized to show that the near-wall scaling laws for at surfaces also apply to the near-wall regions of the turbulent pipe flow.


1989 ◽  
Vol 111 (4) ◽  
pp. 394-400 ◽  
Author(s):  
Reda R. Mankbadi

This work is concerned with simulations of rotor-generated unsteady response of the turbulent flow in a stator. The rotor’s effect is represented by moving cylinders of equivalent drag coefficient that produce passing wakes at the entrance of the stator. The unsteady incompressible Navier–Stokes equations are solved on a staggered grid and eddy viscosities are obtained using a k–ε model. The rotor-generated wakes were found to produce a pressure field at the stator’s entrance that increases in the direction of the wake traverse. At a streamwise distance equal to the distance between the stator blades, the pressure becomes uniform across the channel and the oscillations in the pressure field decay. Because of the initial asymmetry of the pressure field, the time-averaged mean velocity is no longer symmetric. This asymmetry of the mean flow continues along the passage even after the pressure has regained its symmetry. As a result of the passing of the rotor-generated wakes, large periodic oscillations are introduced into the mean velocity and turbulence energy. The time-averaged turbulence energy and the wall shear stress increases in the direction of the rotor traverse.


1982 ◽  
Vol 1 (18) ◽  
pp. 53
Author(s):  
O. Daubert ◽  
A. Hauguel ◽  
J. Cahouet

N.S.L. program is a finite-difference code for two dimensionnal flows with a free surface in a vertical plane. Basic equations are Navier-Stokes Equations with a simple simulation of turbulent effects by an eddy viscosity coefficient related to the mixing length and the mean velocity gradient. Theses equations are solved in a variable domain in time. The main features of the numerical method are presented. Some comparisons with theoretical solutions give a good validation of the code both in linear and non linear cases. Other examples of application are given.


Author(s):  
Charles Hirsch ◽  
Andrei E. Khodak

An S-shaped diffusing duct flow is analysed with various turbulence models: standard high-Reynolds-number k-ε model with wall functions, a low-Reynolds-number k-ε model, and an explicit non-linear algebraic Reynolds stress closure model (ASM). In addition, computations were obtained with parabolic and partially-parabolic approximations along with solutions of the full Navier-Stokes equations. Results of the numerical simulation are compared with LDA measurements of the turbulent flow as reported by Whitelaw and Yu (1993). Detailed comparisons of mean velocity and Reynolds stress distributions are presented. It is shown that the partially-parabolic approach gives a significant improvement over parabolic approximation in predicting mean velocities and pressure distributions. However, the turbulence models used are still not able to reproduce all the observed flow features, although the ASM results appear to be slightly but consistently closer to the experimental data.


Author(s):  
Jian Li ◽  
Dongrun Wu ◽  
Jinfang Teng ◽  
Mingmin Zhu ◽  
Xiaoqing Qiang

Abstract A major concern in the Computational Fluid Dynamics (CFD)-based throughflow calculation is the treatment of the incidence and deviation. This paper investigates the effects of the incidence and deviation on the CFD-based throughflow analysis by a time-marching throughflow model. The model is realized by solving complete Navier-Stokes equations with a single grid in the g-wise direction. The inviscid blade force is determined by calculating a pressure difference between the pressure and suction surfaces. The losses are introduced by imposing a blade surface skin friction factor converted from the pressure loss coefficient. And the flow discontinuity problem at the leading and trailing edges is resolved by modifying the mean blade surface to accommodate the incidence and deviation. The sensitivity of the throughflow results to the modification strategy of the mean blade surface is studied through response surface method. And the Kriging-assisted genetic algorithm (GA) is applied to determine the optimal distributions of incidence and deviation in the streamwise direction for NASA Rotor 37. Finally, four examples are provided to validate the throughflow model and to demonstrate the effects of incidence and deviation on CFD-based throughflow analysis at off-design conditions.


1989 ◽  
Vol 209 ◽  
pp. 285-308 ◽  
Author(s):  
R. J. Bodonyi ◽  
W. J. C. Welch ◽  
P. W. Duck ◽  
M. Tadjfar

A numerical study of the generation of Tollmien-Schlichting (T–S) waves due to the interaction between a small free-stream disturbance and a small localized variation of the surface geometry has been carried out using both finite–difference and spectral methods. The nonlinear steady flow is of the viscous–inviscid interactive type while the unsteady disturbed flow is assumed to be governed by the Navier–Stokes equations linearized about this flow. Numerical solutions illustrate the growth or decay of the T–S waves generated by the interaction between the free-stream disturbance and the surface distortion, depending on the value of the scaled Strouhal number. An important result of this receptivity problem is the numerical determination of the amplitude of the T–S waves.


1998 ◽  
Vol 14 (1) ◽  
pp. 23-29
Author(s):  
Robert R. Hwang ◽  
Sheng-Yuh Jaw

ABSTRACTThis paper presents a numerical study on turbulent vortex shedding flows past a square cylinder. The 2D unsteady periodic shedding motion was resolved in the calculation and the superimposed turbulent fluctuations were simulated with a second-order Reynolds-stress closure model. The calculations were carried out by solving numerically the fully elliptic ensemble-averaged Navier-Stokes equations coupled with the turbulence model equations together with the two-layer approach in the treatment of the near-wall region. The performance of the computations was evaluated by comparing the numerical results with data from available experiments. Results indicate that the present study gives good agreement in the shedding frequency and mean drag as well as in some phase profiles of the mean velocity.


Author(s):  
Bruce M. Boghosian ◽  
Luis M. Fazendeiro ◽  
Jonas Lätt ◽  
Hui Tang ◽  
Peter V. Coveney

We present new methods for the determination of periodic orbits of general dynamical systems. Iterative algorithms for finding solutions by these methods, for both the exact continuum case, and for approximate discrete representations suitable for numerical implementation, are discussed. Finally, we describe our approach to the computation of unstable periodic orbits of the driven Navier–Stokes equations, simulated using the lattice Boltzmann equation.


Sign in / Sign up

Export Citation Format

Share Document