Research and Analysis on Damage of Fretting Wear and Fretting Fatigue for Components in NPPs

Author(s):  
Dong Ning ◽  
Min Zhang ◽  
Yongchen Xie ◽  
Yinbiao He ◽  
Weida Yao

In this paper, from the point of view of study and analysis on fretting wear and fretting fatigue mechanism of materials, the main differences between fretting fatigue and ordinary fatigue are summarized; further more, the damage reasons on a component in a NPP are analyzed and semi-quantitative relationship between fretting fatigue and ordinary fatigue for the component material is obtained to provide with referenced basis for structural improvement and failure analysis on original structure.

2015 ◽  
pp. 26-37
Author(s):  
V. B. Golub ◽  
V. V. Bondareva ◽  
A. N. Sorokin ◽  
L. F. Nikolaychuk

Plant communities with reed domination (Phragmites australis agg.) occupy the large areas in the Lower Volga Valley and especially in the river delta. We have set the task to reveal the diversity of these communities in the Lower Volga Valley. For this purpose, we applied the database that is registered in the Global Index of Vegetation-Plot Databases (GIVD) under the EU-RU–002 index (http://www.givd.info/) and includes 14871 relevés made during the period from 1924 to 2013. Communities with the dominance of reed were defined as such, if the coverage of this plant was more than 50 %. We have found 375 such relevés in the database. At first, one basal community, 3 associations and 3 subassociations with domination of Phragmites australis agg. were distinguished in the Lower Volga Valley. All processing and analysis of relevés were performed using the software package JUICE 7.0. (Tichý, 2002). The «Cocktail» method was applied to establish the sociological groups that indicate environmental conditions (Bruelheide, 2000). The expert system for selection from the database of relevés by means of these groups was created. It is allowed us to ascribe relevés to earlier distinguished associations, subassociations and basal community. 171 relevés have been identified by the expert system and they were assigned to association, subassociation or the basal community. 204 relevés were not referred to any association, subassociation or the basal community. We wanted to answer the question: are there among these 204 relevés, which could be interpreted as the new syntaxa, giving them the proper ecological characteristics? For this purpose, the cluster analysis of 204 relevés has been carried out. The optimal level of clustering was determined by calculating the index of “crispness of classification” (Botta-Dukát et al., 2005). The greatest “crispness of classification” was reached at allocation of 13 clusters. Consideration of the floristic composition of allocated groups had shown that 11 of them were the transitional plant communities among the earlier established syntaxa. Only two clusters were differed in rather original structure that we could explain by the influence of environment factors. We have identified them as new associations Rubio tataricae-Phragmitetum australis and Cynancho acuti-Phragmitetum australis. All associations with the dominance of Phragmites australis agg. distinguished in the Lower Volga Valley were included in the alliance Phragmition communis Koch 1926, order Phragmitetalia communis Koch 1926. In literary sources from the ecological point of view these syntaxa are defined as the wetland communities, which are closely linked to water bodies (Šumberová et al., 2011; Ermakov, 2012). However, in many cases this definition does not correspond to the ecology of plant communities with the dominance of reed in the lower reaches of the Volga River. Ecotops of these communities are flooded for up to 2–3 months in a year and then they dry out. In the autumn, the ground water level can drop to a depth of one meter (Golub et al., 2011). The plant satellites of the reed here are often mesophytic plants such as Rubus caesius, Calamagrostis epigeios, Phalaris arundinacea, Rubia tatarica, Althaea officinalis, and Rumex stenophyllus. Therefore, the inclusion of phytocoenosises with domination of the reed in the lower reaches of the Volga River in the alliance Phragmition communis is rather relative. A correct placement of these plant communities in the system of vegetation syntaxa of the arid areas can be made only if it is based on original data obtained from much bigger territory than the Lower Volga Valley. In future geobotanical studies, it is desirable to divide the aggregation of Phragmites australis agg. into smaller species taxa.


1996 ◽  
Vol 445 ◽  
Author(s):  
Nickolaos Strifas ◽  
Aris Christou

AbstractThe reliability of plastic packaged integrated circuits was assessed from the point of view of interfacial mechanical integrity. It is shown that the effect of structural weaknesses caused by poor bonding, voids, microcracks or delamination may not be evident in the electrical performance characteristics, but may cause premature failure. Acoustic microscopy (C-SAM) was selected for nondestructive failure analysis of the plastic integrated circuit (IC) packages. Integrated circuits in plastic dual in line packages were initially subjected to temperature (25 °C to 85 °C) and humidity cycling (50 to 85 %) where each cycle was of one hour duration and for over 100 cycles and then analyzed. Delamination at the interfaces between the different materials within the package, which is a major cause of moisture ingress and subsequent premature package failure, was measured. The principal areas of delamination were found along the leads extending from the chip to the edge of the molded body and along the die surface itself. Images of the 3-D internal structure were produced that were used to determine the mechanism for a package failure. The evidence of corrosion and stress corrosion cracks in the regions of delamination was identified.


2014 ◽  
Vol 85 (5) ◽  
pp. 055106 ◽  
Author(s):  
Xin Li ◽  
Zhengxing Zuo ◽  
Wenjie Qin

2019 ◽  
Vol 1 (9) ◽  
Author(s):  
Quazi Md. Zobaer Shah ◽  
Md. Asaduzzaman Chowdhury ◽  
Md. Arefin Kowser

1988 ◽  
Vol 110 (3) ◽  
pp. 517-524 ◽  
Author(s):  
Y. Berthier ◽  
Ch. Colombie´ ◽  
L. Vincent ◽  
M. Godet

Fretting wear and fretting fatigue are governed by the rate of formation of materials (third-bodies) between the initial contact surfaces. Furthermore, the third-bodies must be maintained within the contact. The issue of the race between third-body formation and subsurface damage conditions the effect of fretting on fatigue. That race lasts for only a few hundred or at best a few thousand cycles. Effective third-bodies (or good anti-fretting lubricants) must adhere strongly to the rubbing surfaces, and be able to accommodate at least part of the relative displacement. Great care in the design of test equipment has to be exercised before definitive results on the effect of amplitude and frequency on either fretting fatigue or fretting wear can be obtained for a given contact condition, given materials and given environments.


Sign in / Sign up

Export Citation Format

Share Document