TRACE Validation Against LOCA Transients Performed on FIX-II Facility

2013 ◽  
Author(s):  
Xiao Hu ◽  
Mian Xing ◽  
Weimin Ma
Keyword(s):  
Experimental Data ◽  
Power Plant ◽  
Nuclear Power Plant ◽  
Nuclear Power ◽  
Simulation Models ◽  
Primary System ◽  
Choked Flow ◽  
Loss Of Coolant Accident ◽  
Trace Model ◽  
Transient Thermal

As a latest developed computational code, TRACE is expected to be useful and effective for analyzing the thermal-hydraulic behaviors in design, licensing and safety analysis of nuclear power plant. However, its validity and correctness have to be verified and qualified before its application into industry. Loss-of-coolant accident (LOCA) is a kind of transient thermal hydraulic event which has been emphasized a lot as a most important threat to the safety of the nuclear power plant. The FIX-II experiments were performed to produce experimental data for understanding the initial stage of LOCA and so as to verify the computational codes. In the present study, based on FIX-II LOCA tests, simulation models for the tests of No. 3025, No. 3061 and No. 5052 which correspond to different LOCA cases were developed to validate the TRACE code (version 5.0 patch 2). The predictions of the TRACE code including the pressure in the primary system, the mass flow rate in certain key parts, and the temperature in the core were compared with the experimental data. The results show that TRACE model can well reproduce the transient thermal-hydraulic behaviors under different LOCA situations. In addition, sensitivity analysis are also performed to investigate the influence of particular models and parameters, including counter current flow limitation (CCFL) model and choked flow model on the results, which show that both the models have significant influence on the outcome of the model.

A Simulation of Small Break Loss of Coolant Accident (SB-LOCA) in AP1000 Nuclear Power Plant Using RELAP5-MV

2017 ◽  
Author(s):  
Eltayeb Yousif ◽  
Zhang Zhijian ◽  
Tian Zhao-fei ◽  
A. M. Mustafa
Keyword(s):  
Power Plant ◽  
Nuclear Power Plant ◽  
Power Systems ◽  
Nuclear Power ◽  
Power Plants ◽  
Computational Simulation ◽  
Primary System ◽  
Transient Time ◽  
Loss Of Coolant Accident ◽  
Loss Of Coolant

To ensure effective operation of nuclear power plants, it is very important to evaluate different accident scenarios in actual plant conditions with different codes. In the field of nuclear safety, Loss of Coolant Accident (LOCA) is one of the main accidents. RELAP-MV Visualized Modularization software technology is recognized as one of the best estimated transient simulation programs of light water reactors, and also has the options for improved modeling methods, advanced programming, computational simulation techniques and integrated graphics displays. In this study, transient analysis of the primary system variation of thermo-hydraulics parameters in primary loop under SB-LOCA accident in AP1000 nuclear power plant (NPP) is carried out by Relap5-MV thermo-hydraulics code. While focusing on LOCA analysis in this study, effort was also made to test the effectiveness of the RELAP5-MV software already developed. The accuracy and reliability of RELAP5-MV have been successfully confirmed by simulating LOCA. The calculation was performed up to a transient time of 4,500.0s. RELAP5-MV is able to simulate a nuclear power system accurately and reliably using this modular modeling method. The results obtained from RELAP5 and RELAP5-MV are in agreement as they are based on the same models though in comparison with RELAP5, RELAP5-MV makes simulation of nuclear power systems easier and convenient for users most especially for the beginners.

Performance of a Spray Pond for Nuclear Power Plant Ultimate Heat Sink

1977 ◽  
Vol 99 (4) ◽  
pp. 650-656
Author(s):  
V. E. Schrock ◽  
G. J. Trezek ◽  
L. R. Keilman
Keyword(s):  
Power Plant ◽  
Nuclear Power Plant ◽  
Thermal Performance ◽  
Heat Sink ◽  
Nuclear Power ◽  
Field Tests ◽  
Computer Code ◽  
Loss Of Coolant Accident ◽  
Loss Of Coolant ◽  
Transient Thermal

Spray ponds have become an attractive method of providing the “ultimate heat sink”, i.e., the assured means of dissipating heat from a nuclear power plant. Two redundant spray ponds were the choice for this service in the Rancho Seco Nuclear Generating Station owned by Sacramento Municipal Utility District. This paper describes the results of full scale field tests of the Rancho Seco ponds which were conducted to verify the thermal performance, drift loss characteristics, and the capability to sustain the cooling requirements for a period of 30 days following a loss-of-coolant accident (LOCA). Correlations of local and average nozzle efficiency and of the drift loss are presented. A computer code was developed for the transient thermal performance of the pond. After verification the code was used to predict performance following LOCA under adverse meteorological conditions based on weather records.

Steam Line Integrity Analyses for LTO: Enhancing Credibility With Comprehensive Measurement

2012 ◽  
Author(s):  
Horst Rothenhöfer ◽  
Andreas Manke
Keyword(s):  
Power Plant ◽  
Nuclear Power Plant ◽  
Nuclear Power ◽  
Simulation Models ◽  
Proper Function ◽  
Blow Down ◽  
Term Operation ◽  
High Level ◽  
Comprehensive Measurement

The safety relevant components of nuclear power plant Neckarwestheim 1 — in service since 1976 — have been reviewed and updated for long-term operation (LTO). The actions included hardware retrofits as well as updates of analysis according to the latest state of the scientific and technical knowledge. For large piping such as the steam lines, the established pipes have been retained while the supports have been optimized. All shock absorbers (snubbers) including corresponding inertia have been eliminated resulting in a defined guidance and statically defined displacements. The integrity analyses for the optimized steam lines, including break preclusion, have been validated successfully with comprehensive measurements. The verification has delivered an extra high level of credibility, exceeding the “standard” requirements to achieve fitness for service in long-term operation. Measurement and validation, which are the main focus of this paper, range from monitoring of service loads to the static and dynamic measurements of pressure, local temperatures and displacements during initial start-up after implementation of the design modifications. The proper function of supports has been proved and the quality of the simulation models has been confirmed. Some expected and some unexpected dynamic events have been detected during blow-down tests. It was demonstrated that the amplitudes of all dynamic loads stay within limits. The validation of analyses with comprehensive measurement has been an important proof of quality and delivered the redundancy required for the integrity of a nuclear power plant in service, enhancing the high level of safety even more.

scholarly journals The Use of System Codes in Scaling Studies: Relevant Techniques for Qualifying NPP Nodalizations for Particular Scenarios

2014 ◽  
Vol 2014 ◽  
pp. 1-13 ◽  
Author(s):  
V. Martinez-Quiroga ◽  
F. Reventos
Keyword(s):  
Experimental Data ◽  
Power Plant ◽  
Nuclear Power Plant ◽  
Nuclear Power ◽  
Safety Analysis ◽  
Small Scale ◽  
Plant Operation ◽  
Essential Step ◽  
Hydraulic Safety ◽  
And Control

System codes along with necessary nodalizations are valuable tools for thermal hydraulic safety analysis. Qualifying both codes and nodalizations is an essential step prior to their use in any significant study involving code calculations. Since most existing experimental data come from tests performed on the small scale, any qualification process must therefore address scale considerations. This paper describes the methodology developed at the Technical University of Catalonia in order to contribute to the qualification of Nuclear Power Plant nodalizations by means of scale disquisitions. The techniques that are presented include the so-calledKv-scaled calculation approach as well as the use of “hybrid nodalizations” and “scaled-up nodalizations.” These methods have revealed themselves to be very helpful in producing the required qualification and in promoting further improvements in nodalization. The paper explains both the concepts and the general guidelines of the method, while an accompanying paper will complete the presentation of the methodology as well as showing the results of the analysis of scaling discrepancies that appeared during the posttest simulations of PKL-LSTF counterpart tests performed on the PKL-III and ROSA-2 OECD/NEA Projects. Both articles together produce the complete description of the methodology that has been developed in the framework of the use of NPP nodalizations in the support to plant operation and control.

The Sensitivity of the Addition of Low-Low Pressurizer Pressure in Coincidence With High Containment Pressure on M310 Type Nuclear Power Plant

2016 ◽  
Author(s):  
Qiu Yanfei
Keyword(s):  
Power Plant ◽  
Nuclear Power Plant ◽  
Nuclear Power ◽  
Deterministic Analysis ◽  
Limit Value ◽  
Loss Of Coolant Accident ◽  
Stop Time ◽  
Design Basis Accident ◽  
Operator Action ◽  
Containment Pressure

Due to the new security system that the operator intervention is assumed to occur in 20 minutes is not acceptable, for the current M310 type nuclear power plant. The loss of coolant accident with Intermediate breaks in primary loop is the only one of design basis accident which need operator action in 20 minutes. For certain size break, the consequences are very sensitive to the pump stop time. According to deterministic analysis that for a certain size break, if stop the pump in 20 minutes after accident, the peak cladding temperature will exceed the limit value of 1204°C. Therefore, it is necessary to add low-low pressurizer pressure in coincidence with high containment pressure signal to stop pump automatically on M310 type nuclear power plant.

scholarly journals Station Black-Out Analysis with MELCOR 1.8.6 Code for Atucha 2 Nuclear Power Plant

2012 ◽  
Vol 2012 ◽  
pp. 1-17 ◽  
Author(s):  
Analia Bonelli ◽  
Oscar Mazzantini ◽  
Martin Sonnenkalb ◽  
Marcelo Caputo ◽  
Juan Matias García ◽  
...  
Keyword(s):  
Power Plant ◽  
Nuclear Power Plant ◽  
Heavy Water ◽  
Nuclear Power ◽  
Failure Time ◽  
Thermal Power ◽  
Radiation Heat Transfer ◽  
Primary System ◽  
Water Release ◽  
Plant Safety

A description of the results for a Station Black-Out analysis for Atucha 2 Nuclear Power Plant is presented here. Calculations were performed with MELCOR 1.8.6 YV3165 Code. Atucha 2 is a pressurized heavy water reactor, cooled and moderated with heavy water, by two separate systems, presently under final construction in Argentina. The initiating event is loss of power, accompanied by the failure of four out of four diesel generators. All remaining plant safety systems are supposed to be available. It is assumed that during the Station Black-Out sequence the first pressurizer safety valve fails stuck open after 3 cycles of water release, respectively, 17 cycles in total. During the transient, the water in the fuel channels evaporates first while the moderator tank is still partially full. The moderator tank inventory acts as a temporary heat sink for the decay heat, which is evacuated through conduction and radiation heat transfer, delaying core degradation. This feature, together with the large volume of the steel filler pieces in the lower plenum and a high primary system volume to thermal power ratio, derives in a very slow transient in which RPV failure time is four to five times larger than that of other German PWRs.

Sign in / Sign up

Export Citation Format

Share Document