Super Critical Carbon Dioxide Brayton Cycle Based Heat Removal System in Nuclear Power Plants

2018 ◽  
Author(s):  
Wei Shuhong ◽  
Zheng Hua
Keyword(s):  
Carbon Dioxide ◽  
Nuclear Power ◽  
Power Plants ◽  
Nuclear Power Plants ◽  
Heat Removal ◽  
Brayton Cycle ◽  
Spent Fuel ◽  
Passive Safety Systems ◽  
Safety Systems ◽  
Critical Carbon Dioxide

Heat removal from the core and spent fuel is one of the fundamental safety functions. Mobile equipment for heat removal from the core and spent fuel is required after Fukushima accident, but there are various constraints for modification of current operating nuclear power plants, such as layout, especially when new equipment are needed inside the containment. New reactor designs emphasize passive safety systems, but most passive safety systems rely on large pool and the heat removal duration depends on water volume. Super critical carbon dioxide brayton cycle can work as a heat engine by itself without external power supply or water supply, and supply surplus electricity due to the difference between expansion work and compression work. Also, super critical carbon dioxide brayton cycle is small, can be designed as a modular, mobile system and has little effect to system configuration or layout of current operating nuclear power plants. Super critical carbon dioxide brayton cycle is a good choice for self-propelling or passive heat removal for nuclear power plant modifications or new reactor designs without difficult modification of system configuration or layout. Super critical carbon dioxide Brayton cycle based heat removal system in nuclear power plants is designed and its technical feasibility is analyzed.

scholarly journals Modelling of Passive Heat Removal Systems: A Review with Reference to the Framatome BWR Reactor KERENA: Part II

Energies ◽  
2019 ◽  
Vol 13 (1) ◽  
pp. 109 ◽  
Author(s):  
René Manthey ◽  
Frances Viereckl ◽  
Amirhosein Moonesi Shabestary ◽  
Yu Zhang ◽  
Wei Ding ◽  
...  
Keyword(s):  
Nuclear Power ◽  
Power Plants ◽  
Gravitational Force ◽  
Heat Removal ◽  
Dimensional System ◽  
Thermal Gradients ◽  
Two Phase ◽  
Passive Safety Systems ◽  
External Power ◽  
Safety Systems

Passive safety systems are an important feature of currently designed and constructed nuclear power plants. They operate independent of external power supply and manual interventions and are solely driven by thermal gradients and gravitational force. This brings up new needs for performance and reliably assessment. This paper provides a review on fundamental approaches to model and analyze the performance of passive heat removal systems exemplified for the passive heat removal chain of the KERENA boiling water reactor concept developed by Framatome. We discuss modeling concepts for one-dimensional system codes such as ATHLET, RELAP and TRACE and furthermore for computational fluid dynamics codes. Part I dealt with numerical and experimental methods for modeling of condensation inside the emergency condenser and on the containment cooling condenser. This second part deals with boiling and two-phase flow instabilities.

scholarly journals Modelling of Passive Heat Removal Systems: A Review with Reference to the Framatome KERENA BWR Reactor: Part I

Energies ◽  
2019 ◽  
Vol 13 (1) ◽  
pp. 35 ◽  
Author(s):  
Amirhosein Moonesi Shabestary ◽  
Frances Viereckl ◽  
Yu Zhang ◽  
Rene Manthey ◽  
Dirk Lucas ◽  
...  
Keyword(s):  
Nuclear Power ◽  
Power Plants ◽  
Gravitational Force ◽  
Heat Removal ◽  
Dimensional System ◽  
Thermal Gradients ◽  
Two Phase ◽  
Passive Safety Systems ◽  
External Power ◽  
Safety Systems

Passive safety systems are an important feature of currently designed and constructed nuclear power plants. They operate independent of external power supply and manual interventions and are solely driven by thermal gradients and gravitational force. This brings up new needs for performance and reliably assessment. This paper provides a review on fundamental approaches to model and analyze the performance of passive heat removal systems exemplified for the passive heat removal chain of the KERENA boiling water reactor concept developed by Framatome. We discuss modelling concepts for one-dimensional system codes such as ATHLET, RELAP and TRACE and furthermore for computational fluid dynamics codes. Part I deals with numerical and experimental methods for modelling of condensation inside the emergency condensers and on the containment cooling condenser while part II deals with boiling and two-phase flow instabilities.

scholarly journals Comparison Analysis of Selected Nuclear Power Plants Supplied With Helium from High-Temperature Gas-Cooled Reactor

2018 ◽  
Vol 25 (s1) ◽  
pp. 204-210 ◽  
Author(s):  
Natalia Szewczuk-Krypa ◽  
Marta Drosińska-Komor ◽  
Jerzy Głuch ◽  
Łukasz Breńkacz
Keyword(s):  
High Temperature ◽  
Power Plant ◽  
Nuclear Power ◽  
Power Plants ◽  
Nuclear Power Plants ◽  
Social Aspect ◽  
Passive Safety Systems ◽  
System A ◽  
Safety Systems ◽  
High Temperature Gas

Abstract The article presents results of efficiency calculations for two 560 MW nuclear cycles with high-temperature gas-cooled reactor (HTGR). An assumption was made that systems of this type can be used in so-called marine nuclear power plants. The first analysed system is the nuclear steam power plant. For the steam cycle, the efficiency calculations were performed with the code DIAGAR, which is dedicated for analysing this type of systems. The other system is the power plant with gas turbine, in which the combustion chamber has been replaced with the HTGR. For this system, a number of calculations were also performed to assess its efficiency. Moreover, the article names factors in favour of floating nuclear power plants with HTGRs, which, due to passive safety systems, are exposed to much smaller risk of breakdown than other types of reactors which were in common use in the past. Along with safety aspects, it is also economic and social aspect which make the use of this type of systems advisable.

Methods of Emergency Heat Removal from Pools and Storages of Spent Fuel of Nuclear Power Plants

2019 ◽  
Vol 92 (3) ◽  
pp. 553-561 ◽  
Author(s):  
Yu. E. Karyakin ◽  
N. N. Peich ◽  
A. A. Pletnev ◽  
E. D. Fedorovich
Keyword(s):  
Nuclear Power ◽  
Power Plants ◽  
Nuclear Power Plants ◽  
Heat Removal ◽  
Spent Fuel

Expectations for Inservice Testing Programs at New Nuclear Power Plants

2017 ◽  
Author(s):  
Thomas G. Scarbrough
Keyword(s):  
Nuclear Power ◽  
Power Plants ◽  
Nuclear Power Plants ◽  
Reactor Core ◽  
Nuclear Regulatory Commission ◽  
Lessons Learned ◽  
Mechanical Equipment ◽  
American Society ◽  
Regulatory Commission ◽  
Safety Systems

In a series of Commission papers, the U.S. Nuclear Regulatory Commission (NRC) described its policy for inservice testing (IST) programs to be developed and implemented at nuclear power plants licensed under 10 CFR Part 52. This paper discusses the expectations for IST programs based on those Commission policy papers as applied in the NRC staff review of combined license (COL) applications for new reactors. For example, the design and qualification of pumps, valves, and dynamic restraints through implementation of American Society of Mechanical Engineers (ASME) Standard QME-1-2007, “Qualification of Active Mechanical Equipment Used in Nuclear Power Plants,” as accepted in NRC Regulatory Guide (RG) 1.100 (Revision 3), “Seismic Qualification of Electrical and Active Mechanical Equipment and Functional Qualification of Active Mechanical Equipment for Nuclear Power Plants,” will enable IST activities to assess the operational readiness of those components to perform their intended functions. ASME has updated the Operation and Maintenance of Nuclear Power Plants (OM Code) to improve the IST provisions for pumps, valves, and dynamic restraints that are incorporated by reference in the NRC regulations with applicable conditions. In addition, lessons learned from performance experience and testing of motor-operated valves (MOVs) will be implemented as part of the IST programs together with application of those lessons learned to other power-operated valves (POVs). Licensee programs for the Regulatory Treatment of Non-Safety Systems (RTNSS) will be implemented for components in active nonsafety-related systems that are the first line of defense in new reactors that rely on passive systems to provide reactor core and containment cooling in the event of a plant transient. This paper also discusses the overlapping testing provisions specified in ASME Standard QME-1-2007; plant-specific inspections, tests, analyses, and acceptance criteria; the applicable ASME OM Code as incorporated by reference in the NRC regulations; specific license conditions; and Initial Test Programs as described in the final safety analysis report and applicable RGs. Paper published with permission.

NUCLEAR WASTE MANAGEMENT IN SPAIN: ANALYSIS OF THE CURRENT SITUATION AND ALTERNATIVE STRATEGIES

10.6036/10156 ◽  
2021 ◽  
Vol 96 (4) ◽  
pp. 355-358
Author(s):  
Pablo Fernández Arias ◽  
DIEGO VERGARA RODRIGUEZ
Keyword(s):  
Nuclear Waste ◽  
Nuclear Power ◽  
Power Plants ◽  
Nuclear Power Plants ◽  
Spent Fuel ◽  
Nuclear Waste Storage ◽  
Alternative Strategies ◽  
Temporary Storage ◽  
Long Term Storage ◽  
High Level

Centralized Temporary Storage Facility (CTS) is an industrial facility designed to store spent fuel (SF) and high level radioactive waste (HLW) generated at Spanish nuclear power plants (NPP) in a single location. At the end of 2011, the Spanish Government approved the installation of the CTS in the municipality of Villar de Cañas in Cuenca. This approval was the outcome of a long process of technical studies and political decisions that were always surrounded by great social rejection. After years of confrontations between the different political levels, with hardly any progress in its construction, this infrastructure of national importance seems to have been definitively postponed. The present research analyzes the management strategy of SF and HLW in Spain, as well as the alternative strategies proposed, taking into account the current schedule foreseen for the closure of the Spanish NPPs. In view of the results obtained, it is difficult to affirm that the CTS will be available in 2028, with the possibility that its implementation may be delayed to 2032, or even that it may never happen, making it necessary to adopt an alternative strategy for the management of GC and ARAR in Spain. Among the different alternatives, the permanence of the current Individualized Temporary Stores (ITS) as a long-term storage strategy stands out, and even the possibility of building several distributed temporary storage facilities (DTS) in which to store the SF and HLW from several Spanish NPP. Keywords: nuclear waste, storage, nuclear power plants.

Sign in / Sign up

Export Citation Format

Share Document