Experimental Characterization of MFDC/CHC Resistance Spot Welding

2005 ◽  
Author(s):  
Wei Li ◽  
Daniel Cerjanec ◽  
Gerald A. Grzadzinski
Keyword(s):  
Resistance Spot Welding ◽  
Spot Welding ◽  
New Technology ◽  
Welding Process ◽  
Current Control ◽  
Constant Current ◽  
Dramatic Improvement ◽  
Resistance Spot ◽  
Target Energy

Resistance spot welding is widely used for joining sheet metal materials in the automotive industry. Most of the existing resistance spot welding systems are single-phase AC-based, and with constant current control. The medium frequency DC (MFDC) system with constant heat control (CHC) is new technology in the resistance spot welding industry. This system promises dramatic improvement on the spot weld quality. However, many of the CHC features are still not known and need to be explored. This paper presents an experimental study on a new MFDC/CHC spot welding system. The goal is to characterize the MFDC/CHC welding process in terms of the process parameters, including the target energy level, force, and welding time. Real time process signals such as force, current, and tip voltage were also collected and analyzed to compare with the traditional spot welding process.

THERMOMECHANICAL ANALYSIS OF THE RESISTANCE SPOT-WELDING PROCESS

2018 ◽  
Vol 10 (5) ◽  
pp. 449-455 ◽  
Author(s):  
Habib Lebbal ◽  
Lahouari Boukhris ◽  
Habib Berrekia ◽  
Abdelkader Ziadi
Keyword(s):  
Resistance Spot Welding ◽  
Spot Welding ◽  
Welding Process ◽  
Thermomechanical Analysis ◽  
Resistance Spot

Analysis of Electromagnetic Inverse Model of Resistance Spot Welding

2010 ◽  
Vol 160-162 ◽  
pp. 974-979
Author(s):  
Nai Feng Fan ◽  
Zhen Luo ◽  
Yang Li ◽  
Wen Bo Xuan
Keyword(s):  
Resistance Spot Welding ◽  
Regularization Method ◽  
Spot Welding ◽  
Influence Factors ◽  
Great Influence ◽  
Welding Process ◽  
Inverse Model ◽  
Resistance Spot ◽  
Inversion Theory

Resistance spot welding (RSW) is an important welding process in modern industrial production, and the quality of welding nugget determines the strength of products to a large extent. Limited by the level of RSW quality monitor, however, RSW has rarely been applied to the fields with high welding quality requirements. Associated with the inversion theory, in this paper, an electromagnetic inverse model of RSW was established, and the analysis of influence factors, such as the layout of the probes, the discrete program and the regularization method, was implemented as well. The result shows that the layout of the probe and the regularization method has great influence on the model. When the probe is located at the y direction of x-axis or the x direction of y-axis and Conjugate Gradient method is selected, a much better outcome can be achieved.

Micro Hardness in the Welded Area at Resistance Spot Welding

2016 ◽  
Vol 1138 ◽  
pp. 153-158
Author(s):  
Mihai Boca ◽  
Gheorghe Nagit ◽  
Laurenţiu Slătineanu
Keyword(s):  
Mechanical Properties ◽  
Resistance Spot Welding ◽  
Spot Welding ◽  
Graphical Representation ◽  
Welding Process ◽  
Electrical Current ◽  
Micro Hardness ◽  
Current Time ◽  
Resistance Spot ◽  
Welding Spot

The resistance spot welding process represents the welding technology used to obtain assemblies trough welded spots characterized by adequate mechanical properties. This assembly process is used mainly into the automotive, petroleum and naval industries. It is applied due to the significant advantages concerning the technology and service properties of the obtained assembly. This paper purposes a study concerning the micro hardness change of an assembly made by resistance welding spot. The entire process of plastic deformations together with the solidification step developed in the presence of the heat generated during welding process determines the mechanical characteristics of the welded spot and, of course, of the assembly obtained. In such conditions, depending on the changes developed during the welding process, the micro hardness of the welded spot varies between the fusion area (FA) and heat affected zone (HAZ). In this way, the graphical representation of the micro hardness repartition gives clues about the weakness areas which don’t correspond to the requirements. As input factors, in this study, the values of current intensity, the electrical current time and the force pressure were considered. In order to solve the proposed problem and to graphically highlight the variation of the micro hardness obtained for welded points, it was used a classical welding device and a micro hardness device analyzer. The graphical representation shows that the micro-hardness and, as a consequence, some mechanical properties changes in the specified region and in the entire mass of the welded spot changes. In this way, the structure of welded spot is characterized by a variation of the hardness in the interest areas.

Sign in / Sign up

Export Citation Format

Share Document