Multi-Objective Thermoeconomic Optimization of Coupling MSF Desalination With PWR Nuclear Power Plant

2008 ◽  
Author(s):  
Mohammad Hasan Khoshgoftar Manesh ◽  
Majid Amidpour ◽  
Mohammad Hosein Hamedi
Keyword(s):  
Power Plant ◽  
Nuclear Power ◽  
Thermodynamic Simulation ◽  
Optimization Technique ◽  
Optimization Techniques ◽  
Feed Water ◽  
Optimization Strategy ◽  
Thermal Systems ◽  
Pressurized Water ◽  
Multi Objective

Thermodynamic simulation programs are widely used for designing complex thermal systems but most of them don’t incorporate second law optimization techniques. In this study, an efficient optimization strategy is presented, which integrates a well-known Evolutionary Algorithms optimization technique with a professional power plant and cogeneration simulator, so as perform exergoeconomic optimization of complex thermal systems and generating combined pinch and exergy representations. This paper deals with the application of an evolutionary algorithm to multi-objective thermoeconomic optimization of coupling desalination plant with pressurized water reactor. The thermodynamic simulation of this plant has been performed in THERMOFLEX simulator. An Excel Add-in called THERMOFLEX Link has been developed to calculate the exergy of each stream from a THERMOFLEX simulation results. In addition, computer code has been developed for thermoeconomic and improved combined pinch-exergy analysis in MATLAB environment. Both design configuration and the process variables are optimized simultaneously. The optimization algorithm can choose among several design options included in a superstructure of the feed water heaters and MSF desalination in dual purpose plant. For the assumptions and simplifications made in this study, a 3000 MWth PWR power plant similar to Bushehr power plant has been considered.

Fuzzy multi-objective decision making approach for nuclear power plant installation

2020 ◽  
Vol 39 (5) ◽  
pp. 6339-6350
Author(s):  
Esra Çakır ◽  
Ziya Ulukan
Keyword(s):  
Linear Programming ◽  
Power Plant ◽  
Nuclear Power Plant ◽  
Energy Supply ◽  
Energy Demand ◽  
Nuclear Power ◽  
Power Plants ◽  
Total Duration ◽  
Objective Functions ◽  
Multi Objective

Due to the increase in energy demand, many countries suffer from energy poverty because of insufficient and expensive energy supply. Plans to use alternative power like nuclear power for electricity generation are being revived among developing countries. Decisions for installation of power plants need to be based on careful assessment of future energy supply and demand, economic and financial implications and requirements for technology transfer. Since the problem involves many vague parameters, a fuzzy model should be an appropriate approach for dealing with this problem. This study develops a Fuzzy Multi-Objective Linear Programming (FMOLP) model for solving the nuclear power plant installation problem in fuzzy environment. FMOLP approach is recommended for cases where the objective functions are imprecise and can only be stated within a certain threshold level. The proposed model attempts to minimize total duration time, total cost and maximize the total crash time of the installation project. By using FMOLP, the weighted additive technique can also be applied in order to transform the model into Fuzzy Multiple Weighted-Objective Linear Programming (FMWOLP) to control the objective values such that all decision makers target on each criterion can be met. The optimum solution with the achievement level for both of the models (FMOLP and FMWOLP) are compared with each other. FMWOLP results in better performance as the overall degree of satisfaction depends on the weight given to the objective functions. A numerical example demonstrates the feasibility of applying the proposed models to nuclear power plant installation problem.

14C Distribution in Atmospheric and Aquatic Environments Around Qinshan Nuclear Power Plant, China

Radiocarbon ◽  
2014 ◽  
Vol 56 (3) ◽  
pp. 1107-1114 ◽  
Author(s):  
Zhongtang Wang ◽  
Dan Hu ◽  
Hong Xu ◽  
Qiuju Guo
Keyword(s):  
Power Plant ◽  
Nuclear Power Plant ◽  
Water Samples ◽  
Nuclear Power ◽  
Dissolved Inorganic Carbon ◽  
Tap Water ◽  
Surface Seawater ◽  
Pressurized Water ◽  
Specific Activities ◽  
Water Reactors

Atmospheric CO2 and aquatic water samples were analyzed to evaluate the environmental 14C enrichment due to operation of the Qinshan nuclear power plant (NPP), where two heavy-water reactors and five pressurized-water reactors are employed. Elevated 14C-specific activities (2–26.7 Bq/kg C) were observed in the short-term air samples collected within a 5-km radius, while samples over 5 km were close to background levels. The 14C-specific activities of dissolved inorganic carbon (DIC) in the surface seawater samples ranged from 196.8 to 206.5 Bq/kg C (average 203.4 Bq/kg C), which are close to the background value. No elevated 14C level in surface seawater was found after 20 years of operation of Qinshan NPP, indicating that the 14C discharged was well diffused. The results of the freshwater samples show that excess 14C-specific activity (average 17.1 Bq/kg C) was found in surface water and well water samples, while no obvious 14C increase was found in drinking water (groundwater and tap water) compared to the background level.

scholarly journals 14C Release in Various Chemical Forms With Gaseous Effluents From the Paks Nuclear Power Plant

Radiocarbon ◽  
1989 ◽  
Vol 31 (03) ◽  
pp. 754-761 ◽  
Author(s):  
Ede Hertelendi ◽  
György Uchrin ◽  
Peter Ormai
Keyword(s):  
Power Plant ◽  
Nuclear Power Plant ◽  
Nuclear Power ◽  
Liquid Scintillation ◽  
Mean Value ◽  
Scintillation Counting ◽  
Pressurized Water ◽  
The Mean ◽  
Water Reactors

We present results of airborne 14C emission measurements from the Paks PWR nuclear power plant. Long-term release of 14C in the form of carbon dioxide or carbon monoxide and hydrocarbons were simultaneously measured. The results of internal gas-proportional and liquid scintillation counting agree well with theoretical assessments of 14C releases from pressurized water reactors. The mean value of the 14C concentration in discharged air is 130Bqm-3 and the normalized release is equal to 740GBq/GWe · yr. > 95% of 14C released is in the form of hydrocarbons, ca 4% is apportioned to CO2, and <1% to CO. Tree-ring measurements were also made and indicated a minute increase of 14C content in the vicinity of the nuclear power plant.

scholarly journals Estimation of the efficiency of combining a npp with a hydrogen facility under conditions of safe use of hydrogen in a steam turbine cycle

2021 ◽  
Vol 23 (2) ◽  
pp. 56-69
Author(s):  
R. Z. Aminov ◽  
A. N. Bairamov
Keyword(s):  
Power Plant ◽  
Nuclear Power Plant ◽  
Power Unit ◽  
Nuclear Power ◽  
Peak Power ◽  
Live Steam ◽  
Feed Water ◽  
Current Period ◽  
Additional Heating ◽  
The Future

THE PURPOSE. System efficiency and competitiveness assess of a new scheme for combining a nuclear power plant with a hydrogen complex based on additional heating of feed water and superheating of live steam in front of the high-pressure cylinder of a steam turbine. METHODS. Basic laws of thermodynamics were applied when developing and substantiating a new scheme for combining a nuclear power plants (NPP) with a hydrogen facility; theoretical regularities were applied of heat engineering; basic regularity were applied of fatigue wear of power equipment and assessment of its working resourse; basic regularities were applied for the assessment of operating costs and net present value (NPV). RESULTS. A new scheme is presented of the combination of a nuclear power plant with a hydrogen facility and a description of its operating principle on the example of a two-circuit nuclear power plant with a VVER-1000 reactor and a C-1000-60 / 1500 turbine. The data are presented on an increase in the productivity of steam generators at nuclear power plants with additional heating of feed water in the range of 235-250 ° C from its nominal value of 230 ° C. The temperature was estimated of live steam superheat depending on the temperature of the additional heating of the feed water. The results are presented of the calculation of the generated peak power by the power unit and the efficiency of conversion of the night off-peak power of the NPP into peak power, as well as the efficiency of the power unit of the NPP depending on the temperature of additional heating of the feed water. Main regularities are given for taking into account the fatigue wear of the main equipment of the hydrogen facility, including the rotor of the NPP turbine in the conditions of the stress-cyclic operation. The results are presented of assessing the cost of peak electricity NPP in combination with a hydrogen facility in comparison with a pumped storage power plant (PSPP) both for the current period and for the future until 2035. CONCLUSION. Hydrogen facility efficiency and competitiveness depends significantly on the intensity of the use of the main equipment in the conditions of the intense-cyclic operation. The hydrogen facility will competitiveness noticeably increase in comparison with the PSPP in the future. Efficiency of the NPP power unit and NPV is highest when the feed water is heated to 235 ° C and superheating of live steam in front of the high-pressure cylinder of the C-1000-60/1500 turbine up to 470°C.The hydrogen facility competes with the PSPP with her specific capital investment at the level of 660 USD / kW, provided that the boosting capabilities of the turbine are used with live steam overheating at 300 ° C and additional heating of feed water to 235°C on the current period. The PSPP does not compete with the hydrogen facility both for the current period and in the future with her specific capital investment of $ 1,500 / kW and above.

Sign in / Sign up

Export Citation Format

Share Document