Convective Heat Transfer and Pumping Power Requirement Using Nanofluid for the Flow Through Corrugated Channel

2015 ◽  
Author(s):  
Shafi Noor ◽  
M. Monjurul Ehsan ◽  
M. S. Mayeed ◽  
A. K. M. Sadrul Islam
Keyword(s):  
Heat Transfer ◽  
Convective Heat Transfer ◽  
Heat Transfer Rate ◽  
Convective Heat ◽  
Transfer Rate ◽  
Volume Fraction ◽  
Pumping Power ◽  
Power Requirement ◽  
Corrugated Channel ◽  
Flow Through

Convective heat transfer rate for turbulent flow using nanofluid through both plain and corrugated channel has been investigated numerically in the present study. Three different types of nanofluids namely Al2O3-water, TiO2-water and CuO-water of different volume fractions (1%, 2%, 3%, 4% and 5%), are used as the working fluid flowing through the channel. The corrugated channels have wall geometries of trapezoidal shape of different amplitude-wavelength ratios. Grid independence study was carried out for all the geometries. The obtained results in case of base fluid-water flowing through parallel plate channel have been validated with well-established correlations. The study has been conducted by finite volume method to solve the transport equation for the momentum, energy and turbulence quantities using single phase model of the nanofluids where the thermophysical properties of the nanofluids are calculated by using different correlations from the literature. In this study, the heat transfer enhancement using nanofluids compared to that using base fluid-water is presented for a range of Reynolds number- 15000 to 40000. The pumping power required for the flow through the channels increases with the increase in the viscosity of the fluid which justifies the increase in pumping power requirement in case of nanofluids compared to that with water. While using corrugation at the wall of the channels, in addition to the enhancement in the convective heat transfer rate, there is an increase in the pumping power requirement for the same Reynolds number. However, for a given requirement of heat transfer rate, the required pumping power can be reduced by using nanofluids. This study includes the trend and limit of volume fraction of nanofluid during this pumping power reduction phenomenon. The results show that with the increase in the volume fraction of the nanofluids, the convective heat transfer rate increases which is same for all the geometries of the fluid domain. Addition of nanofluid reduces the pumping power requirement for a constant heat transfer rate. The volume fraction of the nanofluids with which the maximum reduction of pumping power takes place at the optimum working condition is also found in the present study. This study draws a comparison among three different nanofluids in terms of the enhancement in the convective heat transfer rate and corresponding pumping power requirement for the flow through the trapezoidal shaped corrugated channel of various amplitude-wavelength ratios in order to find out the best nanofluids for its optimum results within a specified range of working conditions.

A Numerical Study of the Effect of an Irradiated Slatted Top Down – Bottom Up Blind on the Convective Heat Transfer Rate From a Recessed Window to an Adjacent Room

2012 ◽  
Author(s):  
Patrick H. Oosthuizen ◽  
J. T. Paul
Keyword(s):  
Heat Transfer ◽  
Convective Heat Transfer ◽  
Heat Transfer Rate ◽  
Convective Heat ◽  
Transfer Rate ◽  
Numerical Study ◽  
Solar Irradiation ◽  
Radiant Heat Transfer ◽  
Top Down ◽  
Bottom Up

Top Down – Bottom Up blinds have become quite popular in recent times. However the effects of such blind systems on the convective heat transfer from the window to the surrounding room have not been extensively studied and the effect of solar irradiation of the blind on the window heat transfer has not received significant attention. The purpose of the present work was therefore to numerically investigate the effect of solar irradiation of Top Down – Bottom Up slatted blinds on this convective heat transfer. An approximate model of the window-blind system has been adopted. The solar radiation falling on the blinds is assumed to produce a uniform rate of heat generation in the blind. The Boussinesq approximation has been used. Radiant heat transfer effects have been neglected. Conditions under which laminar, transitional and turbulent flows occur have been considered. The main emphasis is on the effect of the magnitude of the irradiation and of the size of the blind openings at the top and bottom of the window on the convective heat transfer rate from the window to the room.

scholarly journals A numerical study of free convective heat transfer in a double-glazed window with a between-pane Venetian blind

2021 ◽  
Author(s):  
Tony Avedissian
Keyword(s):  
Heat Transfer ◽  
Convective Heat Transfer ◽  
Heat Transfer Rate ◽  
Convective Heat ◽  
Transfer Rate ◽  
Numerical Study ◽  
Thermal Conductivity Ratio ◽  
Number Range ◽  
Free Convective Heat Transfer ◽  
Venetian Blind

The free convective heat transfer in a double-glazed window with a between-pane Venetian blind has been studied numerically. The model geometry consists of a two-dimensional vertical cavity with a set of internal slats, centred between the glazings. Approximately 700 computational fluid dynamic solutions were conducted, including a grid sensitivity study. A wide set of geometrical and thermo-physical conditions was considered. Blind width to cavity width ratios of 0.5, 0.65, 0.8, and 0.9 were studied, along with three slat angles, 0º (fully open, +/- 45º (partially open), and 75º (closed). The blind to fluid thermal conductivity ratio was set to 15 and 4600. Cavity aspects of 20, 40, and 60, were examined over a Rayleigh number range of 10 to 10⁵, with the Prandtl number equal to 0.71. The resulting convective heat transfer data are presented in terms of average Nusselt numbers. Depending on the specific window/blind geometry, the solutions indicate that the blind can either reduce or enhance the convective heat transfer rate across the glazings. The present study does not consider radiation effects in the numerical solution. Therefore, a post-processing algorithm is presented that incorporates the convective and radiative influences, in order to determine the overall heat transfer rate across the window/blind system.

Electric Field Effects on Natural Convection in Enclosures

1986 ◽  
Vol 108 (4) ◽  
pp. 749-754 ◽  
Author(s):  
D. A. Nelson ◽  
E. J. Shaughnessy
Keyword(s):  
Heat Transfer ◽  
Electric Field ◽  
Convective Heat Transfer ◽  
Heat Transfer Rate ◽  
Convective Heat ◽  
Transfer Rate ◽  
Stokes Equations ◽  
Experimental Studies ◽  
Navier Stokes ◽  
First Order Theory

The enhancement of convective heat transfer by an electric field is but one aspect of the complex thermoelectric phenomena which arise from the interaction of fluid dynamic and electric fields. Our current knowledge of this area is limited to a very few experimental studies. There has been no formal analysis of the basic coupling modes of the Navier–Stokes and Maxwell equations which are developed in the absence of any appreciable magnetic fields. Convective flows in enclosures are particularly sensitive because the limited fluid volumes, recirculation, and generally low velocities allow the relatively weak electric body force to exert a significant influence. In this work, the modes by which the Navier–Stokes equations are coupled to Maxwell’s equations of electrodynamics are reviewed. The conditions governing the most significant coupling modes (Coulombic forces, Joule heating, permittivity gradients) are then derived within the context of a first-order theory of electrohydrodynamics. Situations in which these couplings may have a profound effect on the convective heat transfer rate are postulated. The result is an organized framework for controlling the heat transfer rate in enclosures.

Heat Transfer Enhancement of Channel Flow via Vortex-Induced Vibration of Flexible Cylinder

2014 ◽  
Author(s):  
Junxiang Shi ◽  
Jingwen Hu ◽  
Steven R. Schafer ◽  
Chung-Lung (C. L. ) Chen
Keyword(s):  
Heat Transfer ◽  
Boundary Layer ◽  
Convective Heat Transfer ◽  
Heat Transfer Rate ◽  
Channel Flow ◽  
Convective Heat ◽  
Thermal Performance ◽  
Transfer Rate ◽  
Thermal Boundary Layer ◽  
Flexible Cylinder

Thermal diffusion in a developed thermal boundary layer is considered as an obstacle for improving the forced convective heat transfer rate of a channel flow. In this work, a novel, self-agitating method that takes advantage of vortex-induced vibration (VIV) is introduced to disrupt the thermal boundary layer and thereby enhance the thermal performance. A flexible cylinder is placed at the centerline of a rectangular channel. The vortex shedding due to the cylinder gives rise to a periodic vibration of the cylinder. Consequently, the flow-structure-interaction (FSI) strengthens the disruption of the thermal boundary layer by vortex interaction with the walls, and improves the mixing process. This new concept for enhancing the convective heat transfer rate is demonstrated by a three-dimensional modeling study at different Reynolds numbers (84∼168). The fluid dynamics and thermal performance are analyzed in terms of vortex dynamics, temperature fields, local and average Nusselt numbers, and pressure loss. The channel with the self-agitated cylinder is verified to significantly increase the convective heat transfer coefficient. When the Reynolds number is 168, the channel with the VIV improves the average Nu by 234.8% and 51.4% as opposed to the clean channel and the channel with a stationary cylinder, respectively.

Effect of a Pair of Horizontal Frame Members on the Convective Heat Transfer With Laminar and Turbulent Flow From a Recessed Window to a Room

2011 ◽  
Author(s):  
Patrick H. Oosthuizen ◽  
David Naylor
Keyword(s):  
Heat Transfer ◽  
Prandtl Number ◽  
Convective Heat Transfer ◽  
Turbulent Flows ◽  
Heat Transfer Rate ◽  
Convective Heat ◽  
Transfer Rate ◽  
Numerical Study ◽  
Wall Functions ◽  
Inner Surface

The horizontal frame members that often protrude from the inner surface of a window can significantly effect the convective heat transfer rate from this inner surface to the room. The purpose of the present numerical study was to determine how the size of a pair of horizontal frame members effect this heat transfer rate. The flow has been assumed to be steady and conditions under which laminar, transitional, and turbulent flows occur are considered. Fluid properties have been assumed constant except for the density change with temperature that gives rise to the buoyancy forces, this being dealt with using the Boussinesq approach. The governing equations have been solved using the FLUENT commercial CFD code. The k-epsilon turbulence model with standard wall functions and with buoyancy force effects fully accounted for has been used. The solution has the following parameters: the Rayleigh number, the Prandtl number, the dimensionless window recess depth, and the dimensionless width and depth of the frame members. Results have been obtained for a Prandtl number of 0.74.

scholarly journals CONVECTIVE HEAT TRANSFER AND POWER SAVING APPLICATION OF SI BASED NANOPARTICLES IN A CIRCULAR PIPE

2020 ◽  
Vol 50 (4) ◽  
pp. 321-327
Author(s):  
Md Insiat Islam Rabby ◽  
Farzad Hossain ◽  
S.A.M. Shafwat Amin ◽  
Tazeen Afrin Mumu ◽  
MD Ashraf Hossain Bhuiyan ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Convective Heat Transfer ◽  
Convective Heat ◽  
Base Fluid ◽  
Volume Fraction ◽  
Numerical Study ◽  
Convective Heat Transfer Coefficient ◽  
Circular Pipe ◽  
Working Fluid ◽  
Pumping Power

A numerical study of laminar forced convection heat transfer for the fully developed region inside a circular pipe filled with Si based nanoparticle is presented for investigating the parameters of heat transfer. Four Si based nanoparticles Si, SiC, SiO2, Si3N4 with 1-5% volume fraction have been mixed with water to prepare nanofluids which is used for working fluid to flow over a circular pipe with 5mm diameter and 700mm length. Heat transfer characteristics and pumping power have been calculated at fully developed region with constant heat flux condition on pipe wall to identify the heat transfer enhancement ratio and pumping power reduction ratio among base fluid water and each nanofluids. It is worth mentioning that utilizing SiC nanoparticle shows not only the highest increment of Nusselt number and convective heat transfer coefficient but also the highest decrement of pumping power requirement and FOM in comparison to the base fluid.

Effect of window configurations on its convective heat transfer rate

2020 ◽  
Vol 182 ◽  
pp. 107139
Author(s):  
Meseret T. Kahsay ◽  
Girma T. Bitsuamlak ◽  
Fitsum Tariku
Keyword(s):  
Heat Transfer ◽  
Convective Heat Transfer ◽  
Heat Transfer Rate ◽  
Convective Heat ◽  
Transfer Rate
Sign in / Sign up

Export Citation Format

Share Document