Central-Station Solar Hydrogen Power Plant

Solar Energy ◽  
2005 ◽  
Author(s):  
Gregory J. Kolb ◽  
Richard B. Diver ◽  
Nathan Siegel
Keyword(s):  
Sulfuric Acid ◽  
Solid Particle ◽  
Large Scale ◽  
Solar Power ◽  
Storage System ◽  
Energy Storage System ◽  
Thermochemical Cycle ◽  
Thermochemical Process ◽  
Solar Power Tower ◽  
Solar Electricity

Solar power towers can be used to make hydrogen on a large scale. Electrolyzers could be used to convert solar electricity produced by the power tower to hydrogen, but this process is relatively inefficient. Rather, efficiency can be much improved if solar heat is directly converted to hydrogen via a thermochemical process. In the research summarized here, the marriage of a high-temperature (∼1000 °C) power tower with a sulfuric acid/hybrid thermochemical cycle (SAHT) was studied. The concept combines a solar power tower, a solid-particle receiver, a particle thermal energy storage system, and a hybrid-sulfuric-acid cycle. The cycle is “hybrid” because it produces hydrogen with a combination of thermal input and an electrolyzer. This solar thermochemical plant is predicted to produce hydrogen at a much lower cost than a solar-electrolyzer plant of similar size. To date, only small lab-scale tests have been conducted to demonstrate the feasibility of a few of the subsystems and a key immediate issue is demonstration of flow stability within the solid-particle receiver. The paper describes the systems analysis that led to the favorable economic conclusions and discusses the future development path.

Central-Station Solar Hydrogen Power Plant

2006 ◽  
Vol 129 (2) ◽  
pp. 179-183 ◽  
Author(s):  
Gregory J. Kolb ◽  
Richard B. Diver ◽  
Nathan Siegel
Keyword(s):  
Sulfuric Acid ◽  
Solid Particle ◽  
Large Scale ◽  
Solar Power ◽  
Storage System ◽  
Energy Storage System ◽  
Thermochemical Cycle ◽  
Thermochemical Process ◽  
Solar Power Tower ◽  
Solar Electricity

Solar power towers can be used to make hydrogen on a large scale. Electrolyzers could be used to convert solar electricity produced by the power tower to hydrogen, but this process is relatively inefficient. Rather, efficiency can be much improved if solar heat is directly converted to hydrogen via a thermochemical process. In the research summarized here, the marriage of a high-temperature (∼1000°C) power tower with a sulfuric acid∕hybrid thermochemical cycle was studied. The concept combines a solar power tower, a solid-particle receiver, a particle thermal energy storage system, and a hybrid-sulfuric-acid cycle. The cycle is “hybrid” because it produces hydrogen with a combination of thermal input and an electrolyzer. This solar thermochemical plant is predicted to produce hydrogen at a much lower cost than a solar-electrolyzer plant of similar size. To date, only small lab-scale tests have been conducted to demonstrate the feasibility of a few of the subsystems and a key immediate issue is demonstration of flow stability within the solid-particle receiver. The paper describes the systems analysis that led to the favorable economic conclusions and discusses the future development path.

Least cost combinations of solar power, wind power, and energy storage system for powering large-scale grid

2019 ◽  
Vol 412 ◽  
pp. 710-716 ◽  
Author(s):  
Muhammad Yousif ◽  
Qian Ai ◽  
Waqas Ahmad Wattoo ◽  
Ziqing Jiang ◽  
Ran Hao ◽  
...  
Keyword(s):  
Energy Storage ◽  
Wind Power ◽  
Large Scale ◽  
Solar Power ◽  
Storage System ◽  
Energy Storage System ◽  
Large Scale Grid ◽  
Power And Energy ◽  
Scale Grid

scholarly journals Research on capacity optimization of micro-grid hybrid energy storage system based on simulated annealing artificial fish swarm algorith with memory function

2020 ◽  
Vol 185 ◽  
pp. 01023
Author(s):  
Yuan An ◽  
Jianing Li ◽  
Cenyue Chen
Keyword(s):  
Simulated Annealing ◽  
Energy Storage ◽  
Large Scale ◽  
Memory Function ◽  
Storage System ◽  
Energy Storage System ◽  
Hybrid Energy ◽  
Hybrid Energy Storage ◽  
Hybrid Energy Storage System ◽  
With Memory

The intermittence and uncertainty of wind power and photovoltaic power have hindered the large-scale development of both. Therefore, it is very necessary to properly configure energy storage devices in the wind-solar complementary power grid. For the hybrid energy storage system composed of storage battery and supercapacitor, the optimization model of hybrid energy storage capacity is established with the minimum comprehensive cost as the objective function and the energy saving and charging state as the constraints. A simulated annealing artificial fish school algorithm with memory function is proposed to solve the model. The results show that the hybrid energy storage system can greatly save costs and improve system economy.

scholarly journals Review of Battery Management Systems (BMS) Development and Industrial Standards

Technologies ◽  
2021 ◽  
Vol 9 (2) ◽  
pp. 28
Author(s):  
Hossam A. Gabbar ◽  
Ahmed M. Othman ◽  
Muhammad R. Abdussami
Keyword(s):  
Energy Storage ◽  
Large Scale ◽  
Comprehensive Evaluation ◽  
Storage System ◽  
Energy Storage System ◽  
Battery Management System ◽  
Battery Management ◽  
Electrical Power System ◽  
Safety Aspects ◽  
And Performance

The evolving global landscape for electrical distribution and use created a need area for energy storage systems (ESS), making them among the fastest growing electrical power system products. A key element in any energy storage system is the capability to monitor, control, and optimize performance of an individual or multiple battery modules in an energy storage system and the ability to control the disconnection of the module(s) from the system in the event of abnormal conditions. This management scheme is known as “battery management system (BMS)”, which is one of the essential units in electrical equipment. BMS reacts with external events, as well with as an internal event. It is used to improve the battery performance with proper safety measures within a system. Therefore, a safe BMS is the prerequisite for operating an electrical system. This report analyzes the details of BMS for electric transportation and large-scale (stationary) energy storage. The analysis includes different aspects of BMS covering testing, component, functionalities, topology, operation, architecture, and BMS safety aspects. Additionally, current related standards and codes related to BMS are also reviewed. The report investigates BMS safety aspects, battery technology, regulation needs, and offer recommendations. It further studies current gaps in respect to the safety requirements and performance requirements of BMS by focusing mainly on the electric transportation and stationary application. The report further provides a framework for developing a new standard on BMS, especially on BMS safety and operational risk. In conclusion, four main areas of (1) BMS construction, (2) Operation Parameters, (3) BMS Integration, and (4) Installation for improvement of BMS safety and performance are identified, and detailed recommendations were provided for each area. It is recommended that a technical review of the BMS be performed for transportation electrification and large-scale (stationary) applications. A comprehensive evaluation of the components, architectures, and safety risks applicable to BMS operation is also presented.

Innovative Volumetric Solar Receiver Micro-Design Based on Numerical Predictions

2015 ◽  
Author(s):  
Raffaele Capuano ◽  
Thomas Fend ◽  
Bernhard Hoffschmidt ◽  
Robert Pitz-Paal
Keyword(s):  
Solar Radiation ◽  
Energy Demand ◽  
Large Scale ◽  
Solar Power ◽  
Numerical Models ◽  
Numerical Predictions ◽  
Proper Design ◽  
Global Increase ◽  
Solar Power Tower ◽  
Solar Receiver

Due to the continuous global increase in energy demand, Concentrated Solar Power (CSP) represents an excellent alternative, or add-on to existing systems for the production of energy on a large scale. In some of these systems, the Solar Power Tower plants (SPT), the conversion of solar radiation into heat occurs in certain components defined as solar receivers, placed in correspondence of the focus of the reflected sunlight. In a particular type of solar receivers, defined as volumetric, the use of porous materials is foreseen. These receivers are characterized by a porous structure called absorber. The latter, hit by the reflected solar radiation, transfers the heat to the evolving fluid, generally air subject to natural convection. The proper design of these elements is essential in order to achieve high efficiencies, making such structures extremely beneficial for the overall performances of the energy production process. In the following study, a parametric analysis and an optimized characterization of the structure have been performed with the use of self-developed numerical models. The knowledge and results gained through this study have been used to define an optimization path in order to improve the absorber microstructure, starting from the current in-house state-of-the-art technology until obtaining a new advanced geometry.

Sign in / Sign up

Export Citation Format

Share Document