capacity design
Recently Published Documents


TOTAL DOCUMENTS

287
(FIVE YEARS 55)

H-INDEX

21
(FIVE YEARS 3)

2021 ◽  
Vol 907 (1) ◽  
pp. 012003
Author(s):  
L S Tanaya ◽  
H Herryanto ◽  
P Pudjisuryadi

Abstract Partial Capacity Design (PCD) has been developed by using magnification factor to keep some columns undamaged during major earthquake. By doing so, the structures will experience the partial side sway mechanism which is also stable, instead of the beam sidesway mechanism. However, in some cases, structures designed by PCD method failed to show the partial side sway mechanism since unexpected damages were still occurred at some columns. In this research, modification of PCD method is proposed by using two structural models in the design process. The first model is used to design beams and columns which are allowed to experience plastic damages, while the second model is used to design columns which are intended to remain elastic when the structure is subjected to a target earthquake. Two nominal earthquakes corresponding to Elastic Design Response Spectrum (EDRS) level with seismic modification factors (R) of 8.0 and 1.6 are used in the first and second structural models, respectively. It should be noted that the second model is identical to the first model except that the stiffnesses are reduced for elements to simulate potential plastic damages. This proposed method is applied to symmetrical 6 and 10 storey buildings with seismic load according SNI 1726:2012 and with soil classification of SE in Surabaya city. A Non-linear Static Procedure (NSP) or pushover analysis and Non-linear Dynamic Procedure (NDP) or time history analysis are employed to evaluate the performance of the structure. The evaluation is conducted at three earthquake levels which are nominal earthquake that is used in second model, earthquake corresponding to EDRS level, and maximum considered earthquake (MCER) specified by the code (50% higher than EDRS level). The building performances satisfy the drift criteria in accordance with FEMA 273. However, the partial side sway mechanism was not achieved at NDP analysis at maximum seismic load, MCER.


2021 ◽  
Vol 907 (1) ◽  
pp. 012007
Author(s):  
H Herryanto ◽  
L S Tanaya ◽  
P Pudjisuryadi

Abstract The Capacity Design Method is an approach widely used to design earthquake resistant structures. It allows the structures to dissipate earthquake energy by forming plastic hinges through beam side sway mechanism. In the design process, the columns need to be designed stronger than the beams connected to them. Several previous studies have been conducted to propose alternative method allowing partial side sway mechanism namely the Partial Capacity Design (PCD) Method. In this method, selected columns are designed to remain elastic and the plastic hinges are allowed to occur only at the columns base. These columns are designed to resist increased forces. Despite of some successful attempts, PCD method still needs to be developed because sometimes the intended mechanism was not observed. This study proposes a new approach to improve the Partial Capacity Design (PCD) method. Symmetrical 6 and 10 story buildings with 7 bays are analyzed using seismic load for city of Surabaya. Structure behavior under non-linear static analysis is well predicted by this approach. However, under non-linear dynamic analysis, a few unexpected plastic hinges of elastic columns were observed at upper stories. But it should be noted that the earthquake used for performance analysis (maximum considered earthquake) is 50% larger than the one used for design (earthquake level corresponding to elastic design response spectrum).


2021 ◽  
Author(s):  
Dietlinde Köber ◽  
Paul Semrau ◽  
Felix Weber

Abstract Southern Romania experiences special soil conditions, leading to rather long corner periods and to an enlarged plateau of the response spectrum, with associated large displacement demands. Pulse-type ground acceleration records complete this unique seismic area. Research on the seismic behavior of structures built under these special conditions is limited and engineers are not comfortable with alternative solutions such as base isolation. This study investigates the seismic performance of a hospital building with the following two anti-seismic solutions: 1) stiffening, in line with the capacity design method and 2) base isolation. Base shear, structural drift and structural acceleration are compared for both approaches.


2021 ◽  
Vol 23 (2) ◽  
pp. 131-137
Author(s):  
Pamuda Pudjisuryadi ◽  
F. Wijaya ◽  
R. Tanuwijaya ◽  
B.C. Prasetyo ◽  
Benjamin Lumantarna

One design alternative of earthquake resistant building is Partial Capacity Design (PCD) method. Unlike the commonly used capacity design method, PCD allows a safe failure mechanism which is called partial sidesway mechanism. In this mechanism, all beams and some columns are allowed to experience plastic damages while some selected columns are designed to remain elastic (called elastic columns). A new approach to predict the required strengths needed to design each structural member, called modified-PCD (M-PCD) is proposed. In this research six- and ten-story reinforced concrete buildings were designed using M-PCD, and their seismic performances are investigated. The base shear force resisted by the elastic columns was set to approximately 70% of the total base shear. Both nonlinear static procedure (NSP) and nonlinear dynamic procedure (NDP) are used to analyze the structures. The results show that the expected partial side sway mechanism is observed, and the drifts of the buildings are acceptable.


Author(s):  
Jaehwuen Jung ◽  
Hyungsoo Lim ◽  
Dongwon Lee ◽  
Chul Kim

Online matching platforms require new approaches to market design because firms can now control many aspects of the search and interaction process through various IT-enabled features. Although choice capacity—the number of candidates a user can view and select—is a key design feature of online matching platforms, its effect on engagement and matching outcomes remains unclear. We examine the effect of different choice capacities on market performance by conducting a randomized field experiment in collaboration with an online dating platform. Specifically, we design four treatment groups with different choice capacities in which users can only interact with other users in the same group and randomly assign the users to the treatment groups. We find that providing more choice capacity to male and female users has different effects on choice behaviors and matching outcomes. Although increasing the choice capacity of male users yields the highest engagement, increasing the choice capacity of female users is the most effective method to increase matching outcomes. We empirically demonstrate four mechanisms underlying the effectiveness of different choice capacity designs and generalize our findings by discussing how choice capacity can be designed to increase engagement and matching outcomes.


CivilEng ◽  
2021 ◽  
Vol 2 (2) ◽  
pp. 442-458
Author(s):  
Sandip Chhetri ◽  
Rachel A. Chicchi

Experimental testing of deformed rebar anchors (DRAs) has not been performed extensively, so there is limited test data to understand their failure behavior. This study aims to expand upon these limited tests and understand the behavior of these anchors, when loaded in tension. Analytical benchmark models were created using available test data and a parametric study of deformed rebar anchors was performed. Anchor diameter, spacing, embedment, and number of anchors were varied for a total of 49 concrete breakout simulations. The different failure modes of anchors were predicted analytically, which showed that concrete breakout failure is prominent in the DRA groups. The predicted concrete breakout values were consistent with mean and 5% fractile concrete capacities determined from the ACI concrete capacity design (CCD) method. The 5% fractile factor determined empirically from the simulation results was kc = 26. This value corresponds closely with kc = 24 specified in ACI 318-19 and ACI 349-13 for cast-in place anchors. The analysis results show that the ACI CCD formula can be conservatively used to design DRAs loaded in tension by applying a kc factor no greater than 26.


2021 ◽  
Vol 2021 ◽  
pp. 1-18
Author(s):  
Marco Bovo ◽  
Marco Savoia ◽  
Lucia Praticò

The actual seismic building codes have a prescriptive nature, and they are principally aimed to guarantee a prescribed life-safety level against a design-level earthquake even if some methods have been proposed to evaluate the seismic performance of a building along its entire service life. Among these, the performance-based seismic design method permits the design of buildings with a more realistic understanding of both risk of life for occupants and economic losses that may occur in future earthquakes. On the other side, the capacity design method, providing criteria to properly spread the inelastic deformation demand between the different structural elements, allows to establish a ductile collapse mechanism avoiding undesired brittle failures. In this context, modern building codes consider the adoption of a single value for the behaviour factor q to be used in the design process. All this should be argued since, especially for buildings characterized by storeys with different uses and occupancy ratios, the adoption of a single value for q could guide the design process to a solution not minimizing the seismic loss. With reference to these aspects, the paper shows the comparison of the seismic responses of a multistorey framed building designed following two different approaches. The first approach, suggested by many international codes, follows the capacity design rules and considers a single value for the behaviour factor valid for the whole building. In this first case, the damage mechanisms could affect, theoretically, every storey of the building. The second approach, proposed here, considers instead the possibility to adopt different behaviour factors to attribute to different storeys. In this way, it is possible to concentrate and localize the most severe earthquake-induced structural damage on (few) storeys, selected by the designers. By means of the seismic performance assessment methodology, the comparison between the two building responses is provided in terms of expected losses during the whole building service life and is reported in terms of both economical loss and human life loss. The results in the paper show that, if different behaviour factors are properly selected for different storeys, the design process can provide a solution characterized by lower values of seismic loss with respect to the case of the design assuming a single-q value.


Sign in / Sign up

Export Citation Format

Share Document