Numerical Study of Flow and Heat in Long Micro and Nano Channels

2008 ◽  
Author(s):  
Masoud Darbandi ◽  
Shidvash Vakilipour
Keyword(s):  
Boundary Condition ◽  
Numerical Study ◽  
Slip Flow ◽  
Constant Heat Flux ◽  
Gas Flows ◽  
Transfer Rates ◽  
Compressibility Effect ◽  
Momentum And Heat Transfer ◽  
Compressibility Effects ◽  
Early Transition

In this work, we extend a numerical tool capable of solving compressible and incompressible gas flows to study the momentum and heat transfer rates in micro/nano channels with high aspect ratio (L/H = 8000), where the compressibility effect is dominant. The constant heat flux thermal boundary condition is firstly applied at the wall. Next, the flow regime is extended to the early transition regime employing a high order slip velocity boundary condition based on the kinetic theory assumptions. The accuracy of the present results in the slip flow regimes is evaluated against other available theoretical and experimental results. The thermal and compressibility effects on the pressure and Knudsen number distribution are extensively studied along the channel at early transition regimes up to Kn = 0.5. Likely, this Knudsen is the highest one to be reached via applying the foregoing boundary conditions.

AN EXPERIMENTAL AND NUMERICAL STUDY OF HEAT TRANSFER IN A SIMULATED COLLECTOR FOR A SOLAR DRYER

1993 ◽  
Vol 17 (2) ◽  
pp. 145-160
Author(s):  
P.H. Oosthuizen ◽  
A. Sheriff
Keyword(s):  
Heat Transfer ◽  
Numerical Study ◽  
Local Heat Transfer ◽  
Lower Surface ◽  
Local Heat ◽  
Electrical Heating ◽  
Temperature Profiles ◽  
Measured Temperature ◽  
Transfer Rates ◽  
Thermocouple Probe

Indirect passive solar crop dryers have the potential to considerably reduce the losses that presently occur during drying of some crops in many parts of the “developing” world. The performance so far achieved with such dryers has, however, not proved to be very satisfactory. If this performance is to be improved it is necessary to have an accurate computer model of such dryers to assist in their design. An important element is any dryer model is an accurate equation for the convective heat transfer in the collector. To assist in the development of such an equation, an experimental and numerical study of the collector heat transfer has been undertaken. In the experimental study, the collector was simulated by a 1m long by 1m wide channel with a gap of 4 cm between the upper and lower surfaces. The lower surface of the channel consisted of an aluminium plate with an electrical heating element, simulating the solar heating, bonded to its lower surface. Air was blown through this channel at a measured rate and the temperature profiles at various points along the channel were measured using a shielded thermocouple probe. Local heat transfer rates were then determined from these measured temperature profiles. In the numerical study, the parabolic forms of the governing equations were solved by a forward-marching finite difference procedure.

scholarly journals Cumulative Impact of Micropolar Fluid and Porosity on MHD Channel Flow: A Numerical Study

Coatings ◽  
2022 ◽  
Vol 12 (1) ◽  
pp. 93
Author(s):  
Kottakkaran Sooppy Nisar ◽  
Aftab Ahmed Faridi ◽  
Sohail Ahmad ◽  
Nargis Khan ◽  
Kashif Ali ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Chemical Reaction ◽  
Micropolar Fluid ◽  
Numerical Study ◽  
Nonlinear Differential Equations ◽  
X Rays ◽  
Cumulative Impact ◽  
Transfer Rates ◽  
Mass And Heat Transfer ◽  
The Impact

The mass and heat transfer magnetohydrodynamic (MHD) flows have a substantial use in heat exchangers, electromagnetic casting, X-rays, the cooling of nuclear reactors, mass transportation, magnetic drug treatment, energy systems, fiber coating, etc. The present work numerically explores the mass and heat transportation flow of MHD micropolar fluid with the consideration of a chemical reaction. The flow is taken between the walls of a permeable channel. The quasi-linearization technique is utilized to solve the complex dynamical coupled and nonlinear differential equations. The consequences of the preeminent parameters are portrayed via graphs and tables. A tabular and graphical comparison evidently reveals a correlation of our results with the existing ones. A strong deceleration is found in the concentration due to the effect of a chemical reaction. Furthermore, the impact of the magnetic field force is to devaluate the mass and heat transfer rates not only at the lower but at the upper channel walls, likewise.

Sign in / Sign up

Export Citation Format

Share Document