The Spanwise Dependence of Vortex-Shedding From Yawed Circular Cylinders

2009 ◽  
Author(s):  
James D. Hogan ◽  
Joseph W. Hall
Keyword(s):  
Vortex Shedding ◽  
Flow Direction ◽  
Rapid Decrease ◽  
Circular Cylinders ◽  
Mean Flow ◽  
Independence Principle ◽  
Simultaneous Measurements ◽  
Vortex Shedding Frequency ◽  
The Mean ◽  
Shedding Frequency

Simultaneous measurements of the fluctuating wall pressure along the cylinder span were used to examine the spanwise characteristics of the vortex-shedding for yaw angles varying from α = 60° to α = 90°. The Reynolds number based upon the diameter of the cylinder was 56,100. The results indicate that yawing the cylinder to the mean flow direction causes the vortex-shedding in the wake to become more disorderly. This disorder is initiated at the upstream end of the cylinder and results in a rapid decrease in correlation length, from 3.3D for α = 90° to 1.1D for α = 60°. The commonly used independence principle was shown to predict the vortex-shedding frequency reasonably well along the entire cylinder span for α > 70°, but did not work as well for α = 60°.

The Spanwise Dependence of Vortex-Shedding From Yawed Circular Cylinders

2010 ◽  
Vol 132 (3) ◽  
Author(s):  
James D. Hogan ◽  
Joseph W. Hall
Keyword(s):  
Vortex Shedding ◽  
Flow Direction ◽  
Rapid Decrease ◽  
Circular Cylinders ◽  
Mean Flow ◽  
Independence Principle ◽  
Simultaneous Measurements ◽  
Vortex Shedding Frequency ◽  
The Mean ◽  
Shedding Frequency

Simultaneous measurements of the fluctuating wall pressure along the cylinder span were used to examine the spanwise characteristics of the vortex-shedding for yaw angles varying from α=60 deg to α=90 deg. The Reynolds number based on the diameter of the cylinder was 56,100. The results indicate that yawing the cylinder to the mean flow direction causes the vortex-shedding in the wake to become more disorderly. This disorder is initiated at the upstream end of the cylinder and results in a rapid decrease in correlation length, from 3.3D for α=90 deg to 1.1D for α=60 deg. The commonly used independence principle was shown to predict the vortex-shedding frequency reasonably well along the entire cylinder span for α>70 deg, but did not work as well for α=60 deg.

Vortex Shedding in a Tandem Circular Cylinder System With a Yawed Downstream Cylinder

2013 ◽  
Vol 135 (7) ◽  
Author(s):  
Stephen J. Wilkins ◽  
James D. Hogan ◽  
Joseph W. Hall
Keyword(s):  
Vortex Shedding ◽  
Flow Direction ◽  
Large Body ◽  
Flow Regimes ◽  
Small Scale ◽  
Mean Flow ◽  
Spacing Ratio ◽  
Vortex Shedding Frequency ◽  
Shedding Frequency ◽  
Local Spacing

This investigation examines the flow produced by a tandem cylinder system with the downstream cylinder yawed to the mean flow direction. The yaw angle was varied from α=90deg (two parallel tandem cylinders) to α=60deg; this has the effect of varying the local spacing ratio between the cylinders. Fluctuating pressure and hot-wire measurements were used to determine the vortex-shedding frequencies and flow regimes produced by this previously uninvestigated flow. The results showed that the frequency and magnitude of the vortex shedding varies along the cylinder span depending on the local spacing ratio between the cylinders. In all cases the vortex-shedding frequency observed on the front cylinder had the same shedding frequency as the rear cylinder. In general, at small local spacing ratios the cylinders behaved as a single large body with the shear layers separating from the upstream cylinder and attaching on the downstream cylinder, this caused a correspondingly large, low frequency wake. At other positions where the local span of the tandem cylinder system was larger, small-scale vortices began to form in the gap between the cylinders, which in turn increased the vortex-shedding frequency. At the largest spacings, classical vortex shedding persisted in the gap formed between the cylinders, and both cylinders shed vortices as separate bodies with shedding frequencies typical of single cylinders. At certain local spacing ratios two distinct vortex-shedding frequencies occurred indicating that there was some overlap in these flow regimes.

The Unsteady Lift on Bluff Cylindrical Bodies in Unsteady Flow

1982 ◽  
Vol 33 (3) ◽  
pp. 219-236 ◽  
Author(s):  
H. Stapountzis ◽  
J.M.R. Graham
Keyword(s):  
Vortex Shedding ◽  
Elliptic Cylinder ◽  
Reynolds Numbers ◽  
Bluff Bodies ◽  
Mean Flow ◽  
Vortex Shedding Frequency ◽  
The Mean ◽  
Shedding Frequency ◽  
Naca 0015 ◽  
Unsteady Lift

SummaryThe unsteady lift generated on a NACA 0015 aerofoil, a D cylinder (with the flat face down-stream) and an elliptic cylinder was measured when these bodies were exposed to a flow with a two-dimensional sinusoidal upwash at reduced frequencies 0.05 to 0.8. The mean flow Reynolds numbers were in the range 1.2 × 105 to 3 × 105. Unsteady thin aerofoil theory was used in an attempt to predict the unsteady lift on the bluff bodies, as well as the aerofoil section for fequencies in the low range below the vortex shedding frequency. The results were quite accurate for the aerofoil and the D cylinder, but the aerodynamic admittance predicted by this theory for the elliptic cylinder was significantly above that measured experimentally. The movement of the two free separation points was found to play an important role in the characteristic lift behaviour of the elliptic cylinder.

scholarly journals Investigation of passive control of the wake past a thick plate by stability and sensitivity analysis of experimental data

2017 ◽  
Vol 828 ◽  
pp. 753-778 ◽  
Author(s):  
S. Camarri ◽  
R. Trip ◽  
J. H. M. Fransson
Keyword(s):  
Experimental Data ◽  
Sensitivity Analysis ◽  
Vortex Shedding ◽  
Flow Model ◽  
Flow Fields ◽  
Mean Flow ◽  
Vortex Shedding Frequency ◽  
The Mean ◽  
Shedding Frequency ◽  
The Stability

In this paper we propose a strategy, entirely relying on available experimental data, to estimate the effect of a small control rod on the frequency of vortex shedding in the wake past a thick perforated plate. The considered values of the flow Reynolds number range between $Re\simeq 6.6\times 10^{3}$ and $Re=5.3\times 10^{4}$. By means of particle image velocimetry, an experimental database consisting of instantaneous flow fields is collected for different values of suction through the body surface. The strategy proposed here is based on classical stability and sensitivity analysis applied to mean flow fields and on the formulation of an original ad hoc model for the mean flow. The mean flow model is obtained by calibrating the closure of the Reynolds averaged Navier–Stokes equations on the basis of the available experimental data through an optimisation algorithm. As a result, it is shown that the predicted control map agrees reasonably well with the equivalent one measured experimentally. Moreover, it is shown that even when turbulence effects are neglected, the stability analysis applied to the mean flow fields provides a reasonable estimation of the vortex shedding frequency, confirming what is known in the literature and extending it up to $Re=5.3\times 10^{4}$. It is also shown that, when turbulence is taken into account in the stability analysis using the same closure that is calibrated for the corresponding mean flow model, the prediction of the vortex shedding frequency is systematically improved.

Vortex Shedding in a Yawed-Tandem Circular Cylinder Arrangement

2010 ◽  
Author(s):  
Stephen J. Wilkins ◽  
James D. Hogan ◽  
Joseph W. Hall
Keyword(s):  
Vortex Shedding ◽  
Flow Direction ◽  
Large Body ◽  
Flow Regimes ◽  
Small Scale ◽  
Mean Flow ◽  
Spacing Ratio ◽  
Vortex Shedding Frequency ◽  
Shedding Frequency ◽  
Local Spacing

This investigation examines the flow produced by a tandem cylinder system with the downstream cylinder yawed to the mean flow direction. The yaw angle was varied from α = 90° (two parallel tandem cylinders) to α = 60°; this has the effect of varying the local spacing ratio between the cylinders. Fluctuating pressure and hot-wire measurements were used to determine the vortex-shedding frequencies and flow regimes produced by this previously uninvestigated flow. The results showed that the frequency and magnitude of the vortex-shedding varies along the cylinder span depending on the local spacing ratio between the cylinders. In all cases the vortex-shedding frequency observed on the front cylinder had the same shedding frequency as the rear cylinder. In general, at small local spacing ratios the cylinders behaved as a single large body with the shear layers separating from the upstream cylinder and attaching on the downstream cylinder, this caused a correspondingly large, low frequency wake. At other positions where the local span of the tandem cylinder system was larger, small scale vortices began to form in the gap between the cylinders which in turn increased the vortex-shedding frequency. At the largest spacings, classical vortex-shedding persisted in the gap formed between the cylinders and both cylinders shed vortices as separate bodies with shedding frequencies typical of single cylinders. At certain local spacing ratios two distinct vortex-shedding frequencies occurred indicating that there was some overlap in these flow regimes.

Experimental Investigation of a Tandem Cylinder System With a Yawed Upstream Cylinder

2011 ◽  
Author(s):  
Stephen J. Wilkins ◽  
Joseph W. Hall
Keyword(s):  
Experimental Investigation ◽  
Flow Field ◽  
Unsteady Flow ◽  
Surface Pressure ◽  
Vortex Shedding ◽  
Flow Direction ◽  
Pressure Fluctuations ◽  
Mean Flow ◽  
The Mean ◽  
Velocity Spectra

The unsteady flow field produced by a tandem cylinder system with the upstream cylinder yawed to the mean flow direction is investigated for upstream cylinder yaw angles from α = 60° to α = 90°. Multi-point fluctuating surface pressure and hotwire measurements were conducted at various spanwise positions on both the upstream and downstream cylinders. The results indicate that yawing the front cylinder to the mean flow direction causes the pressure and velocity spectra on the upstream and downstream cylinders to become more broadband than for a regular tandem cylinder system, and reduces the magnitude of the peak associated with the vortex-shedding. However, span-wise correlation and coherence measurements indicate that the vortex-shedding is still present and was being obscured by the enhanced three-dimensionality that the upstream yawed cylinder caused and was still present and correlated from front to back, at least for the larger yaw angles investigated. When the cylinder was yawed to α = 60°, the pressure fluctuations became extremely broadband and exhibited shorter spanwise correlation.

Influence of slip on the flow past superhydrophobic circular cylinders

2011 ◽  
Vol 680 ◽  
pp. 459-476 ◽  
Author(s):  
PRANESH MURALIDHAR ◽  
NANGELIE FERRER ◽  
ROBERT DANIELLO ◽  
JONATHAN P. ROTHSTEIN
Keyword(s):  
Circular Cylinder ◽  
Vortex Shedding ◽  
Flow Direction ◽  
Superhydrophobic Surfaces ◽  
Separation Point ◽  
Circular Cylinders ◽  
Recirculation Region ◽  
Small Scale ◽  
Flow Past ◽  
Shedding Frequency

Superhydrophobic surfaces have been shown to produce significant drag reduction for both laminar and turbulent flows of water through large- and small-scale channels. In this paper, a series of experiments were performed which investigated the effect of superhydrophobic-induced slip on the flow past a circular cylinder. In these experiments, circular cylinders were coated with a series of superhydrophobic surfaces fabricated from polydimethylsiloxane with well-defined micron-sized patterns of surface roughness. The presence of the superhydrophobic surface was found to have a significant effect on the vortex shedding dynamics in the wake of the circular cylinder. When compared to a smooth, no-slip cylinder, cylinders coated with superhydrophobic surfaces were found to delay the onset of vortex shedding and increase the length of the recirculation region in the wake of the cylinder. For superhydrophobic surfaces with ridges aligned in the flow direction, the separation point was found to move further upstream towards the front stagnation point of the cylinder and the vortex shedding frequency was found to increase. For superhydrophobic surfaces with ridges running normal to the flow direction, the separation point and shedding frequency trends were reversed. Thus, in this paper we demonstrate that vortex shedding dynamics is very sensitive to changes of feature spacing, size and orientation along superhydrophobic surfaces.

Stability properties of forced wakes

2007 ◽  
Vol 579 ◽  
pp. 137-161 ◽  
Author(s):  
B. THIRIA ◽  
J. E. WESFREID
Keyword(s):  
Vortex Shedding ◽  
Mean Flow ◽  
Near Wake ◽  
Global Mode ◽  
Spatial Properties ◽  
Moderate Reynolds Number ◽  
Vortex Shedding Frequency ◽  
Shedding Frequency ◽  
The Stability ◽  
Selection Of

Thiria, Goujon-Durand & Wesfreid (J. Fluid Mech. vol. 560, 2006, p. 123), it was shown that vortex shedding from a rotationally oscillating cylinder at moderate Reynolds number can be characterized by the spatial coexistence of two distinct patterns, one of which is related to the forcing frequency in the near wake and the other to a frequency close to the natural one for the unforced case downstream of this locked region. The existence and the modification of these wake characteristics were found to be strongly affected by the frequency and the amplitude of the cylinder oscillation. In this paper, a linear stability analysis of these forced regimes is performed, and shows that the stability characteristics of such flows are governed by a strong mean flow correction which is a function of the oscillation parameters. We also present experiments on the spatial properties of the global mode and on the selection of the vortex shedding frequency as a function of the forcing conditions for Re = 150. Finally, we elucidate a diagram of locked and non-locked states, for a large range of frequencies and amplitudes of the oscillation.

The Effect of Sound on Vortex Shedding From Single and Tandem Cylinders

2002 ◽  
Author(s):  
Joseph W. Hall ◽  
Samir Ziada ◽  
David S. Weaver
Keyword(s):  
Vortex Shedding ◽  
Sound Field ◽  
Open Circuit ◽  
Mean Flow ◽  
Number Range ◽  
Single Cylinder ◽  
Tandem Cylinders ◽  
Vortex Shedding Frequency ◽  
The Mean ◽  
Lock In

A single cylinder and two tandem cylinders configurations with longitudinal pitch ratios L/D = 1.75 and 2.5 were rigidly mounted in an open circuit windtunnel and a sound field was applied so that the acoustic particle velocity was normal to both the cylinder axis and the mean flow velocity. Tests were performed for a Reynolds number range of 5000 < ReD < 24000. The effect of sound on the vortex shedding was investigated by instrumenting the cylinders with pressure taps and hot-wire probes. These tests show that applied sound can entrain and shift the natural vortex shedding frequency to the frequency of excitation and produce nonlinearities in the wake. The lock-in envelope for the tandem cylinders is considerably larger than for the single cylinder. The lock-in range for the smaller tandem cylinder spacing (L/D = 1.75) was broader still than either the single cylinder, or the L/D = 2.5 tandem cylinder case.

Wake Formation for an Oscillating Small-Incidence-Angle Cylinder Pair in Cross-Flow

2011 ◽  
Author(s):  
Mir M. Hayder
Keyword(s):  
Incidence Angle ◽  
Flow Direction ◽  
Incident Angle ◽  
Cross Flow ◽  
Wake Flow ◽  
Circular Cylinders ◽  
Mean Flow ◽  
Small Incidence ◽  
The Mean ◽  
Wake Formation

The wake region of a pair of equal-diameter staggered circular cylinders in cross-flow is investigated experimentally for Reynolds numbers, based on the mean flow velocity, U, and the cylinder diameter, D, within the range 540 ≤ Re ≤ 755. The centre-to-centre pitch ratio and stagger angle of the cylinders at their mean position are P/D = 2.0 and α = 16°, respectively. In an earlier study, wake formation of a small-incident-angle cylinder pair was investigated for forced oscillation (transverse to the flow direction) of the upstream cylinder only. The present study is aimed to reveal the modification of the wake when the oscillation is shifted from the upstream to downstream cylinder or vice versa. Results with cylinder excitation frequencies in the range 0.07 ≤ feD/U ≤ 1.10 are reported. It is observed that for both upstream and downstream cylinder oscillations with frequency feD/U ≤ 0.10 the wake flow patterns remain essentially the same as those of the corresponding static cases. However, for frequency feD/U > 0.10 the wake undergoes considerable modification vis-a`-vis when the cylinders are stationary, and the flow pattern within the wake is strongly dependent on feD/U value. As also observed in the previous study, there are distinct regions of synchronization between the dominant wake periodicities and the cylinder oscillation over the whole range of feD/U. These synchronizations involve sub- and super-harmonics as well as fundamental synchronizations and are the result of the formation of two rows of vortices, one on either side of the combined wake of the cylinder pair. The manner in which the wake responds to the cylinder oscillation depends strongly on whether it is the upstream or downstream cylinder which is oscillating. Flow-visualization images suggests that the synchronizations on the mean-flow side of the downstream cylinder occur from the outer vortices shed by the downstream cylinder, and those on the mean-flow side of the upstream cylinder occur from the vortices formed by the interaction of the two gap shear layers and the outer shear layer separated from the upstream cylinder.

Sign in / Sign up

Export Citation Format

Share Document