<title>Large-area full-color AC plasma display monitor</title>

ABSTRACTLarge area polymer photodiode arrays were designed and fabricated for full-color imaging applications. These sensor arrays are of high photosensitivity, low dark current, large dynamic range and fast response time. The red, green and blue color primaries were achieved by coupling a set of color filters with the polymer sensor pixels with broad response covering entire visible spectrum. Image recovery process from the pixel photocurrent data was developed, which is suitable generally to image arrays with power-law light intensity dependence and with finite pixel dark current. Large sensing length photodiode arrays (2.5”5”) were fabricated with pixel densities from 40 to 100 dot-per-inch. They were used as the sensing elements in page size document scanners. Voltage switchable polymer photodetectors were developed. Their photosensitivity can be switched on and off with external bias. These devices can be used as the sensing elements in x-y addressable two-dimensional sensor matrices. The high on/off switching ratio and high photocurrent/dark-current ratio allow such two-dimensional, passive photosensor matrices be used for image sensing applications.

Download Full-text

DEVELOPMENT OF FULL-COLOR 40-IN DC PLASMA DISPLAY FOR HDTV

International Conference on Consumer Electronics ◽

10.1109/icce.1996.517294 ◽

2005 ◽

Author(s):

M. Seki ◽

J. Koike ◽

H. Murakami ◽

S. Yoshikawa ◽

K. Wani

Keyword(s):

Dc Plasma ◽

Full Color ◽

Plasma Display

Download Full-text

44.4: Distinguished Paper: Towards Large-Area Full-Color Active-Matrix Printed Polymer OLED Television

SID Symposium Digest of Technical Papers ◽

10.1889/1.1821344 ◽

2004 ◽

Vol 35 (1) ◽

pp. 1284 ◽

Cited By ~ 14

Author(s):

N. C. van der Vaart ◽

H. Lifka ◽

F. P. M. Budzelaar ◽

J. E. J. M. Rubingh ◽

J. J. L. Hoppenbrouwers ◽

...

Keyword(s):

Large Area ◽

Active Matrix ◽

Full Color

Download Full-text

Development of panel structure for a high-resolution 21-in-diagonal full-color surface-discharge plasma display panel

IEEE Transactions on Electron Devices ◽

10.1109/16.817570 ◽

2000 ◽

Vol 47 (1) ◽

pp. 77-81 ◽

Cited By ~ 50

Author(s):

T. Shinoda ◽

M. Wakitani ◽

T. Nanto ◽

N. Awaji ◽

S. Kanagu

Keyword(s):

High Resolution ◽

Discharge Plasma ◽

Surface Discharge ◽

Plasma Display Panel ◽

Full Color ◽

Plasma Display

Download Full-text

Full-color active-matrix organic light-emitting diode display on human skin based on a large-area MoS2 backplane

Science Advances ◽

10.1126/sciadv.abb5898 ◽

2020 ◽

Vol 6 (28) ◽

pp. eabb5898 ◽

Cited By ~ 5

Author(s):

Minwoo Choi ◽

Sa-Rang Bae ◽

Luhing Hu ◽

Anh Tuan Hoang ◽

Soo Young Kim ◽

...

Keyword(s):

Light Emitting Diode ◽

Thin Film Transistor ◽

Human Hand ◽

Large Area ◽

Active Matrix ◽

Light Emitting ◽

2D Material ◽

Full Color ◽

Organic Light ◽

Health Care Monitoring

Electronic applications are continuously developing and taking new forms. Foldable, rollable, and wearable displays are applicable for human health care monitoring or robotics, and their operation relies on organic light-emitting diodes (OLEDs). Yet, the development of semiconducting materials with high mechanical flexibility has remained a challenge and restricted their use in unusual format electronics. This study presents a wearable full-color OLED display using a two-dimensional (2D) material-based backplane transistor. The 18-by-18 thin-film transistor array was fabricated on a thin MoS2 film that was transferred to Al2O3 (30 nm)/polyethylene terephthalate (6 μm). Red, green, and blue OLED pixels were deposited on the device surface. This 2D material offered excellent mechanical and electrical properties and proved to be capable of driving circuits for the control of OLED pixels. The ultrathin device substrate allowed for integration of the display on an unusual substrate, namely, a human hand.

Download Full-text

Plasma display technologies for large area screen and cost reduction

IEEE Transactions on Plasma Science ◽

10.1109/tps.2006.872453 ◽

2006 ◽

Vol 34 (2) ◽

pp. 279-286 ◽

Cited By ~ 41

Author(s):

T. Shinoda ◽

K. Awamoto

Keyword(s):

Cost Reduction ◽

Large Area ◽

Plasma Display

Download Full-text

Large-Area Wet Micro-Printing (LAMP)for Organic Device Patterning

MRS Proceedings ◽

10.1557/proc-871-i6.27 ◽

2005 ◽

Vol 871 ◽

Author(s):

Hongzheng Jin ◽

James C. Sturm

Keyword(s):

Surface Engineering ◽

Low Cost ◽

Large Area ◽

Printing Plate ◽

Light Emitting ◽

Full Color ◽

Important Challenge ◽

One Step ◽

Materials Used ◽

Color Pixel

AbstractAn important challenge for Organic Light-Emitting Diodes (OLEDs) manufacturing is patterning method of the organic materials used for different colors. In this talk, a Large-Area wet Micro-Printing (LAMP) technique is proposed and demonstrated for organic device patterning. A printing plate is first prepared by surface engineering so that a designed surface energy pattern is achieved. The printing plate is then coated with “ink,” brought into contact the device substrate, and the “ink” is transferred. With this approach, the red (R), green (G) blue (B) sub-pixel arrays needed in a full-color display can be printed in three successive steps, one step for each color. Both single-color pixel arrays and R, G, B sub-pixel arrays have been patterned as a demonstration of the feasibility of this method. The technique has the potential advantages of low-cost and high-throughput and it avoids some of the practical problems associated with the design and operation of an ink-jet apparatus.

Download Full-text