An inhibited laser

Traditional lasers function using resonant cavities, in which the round-trip optical path is exactly equal to an integer multiple of the intracavity wavelengths to constructively enhance the spontaneous emission rate. By taking advantage of the resonant cavity enhancement, the narrowest sub-10-mHz-linewidth laser and a 10^-16-fractional-frequency-stability superradiant active optical clock (AOC) have been achieved. However, never has a laser with atomic spontaneous radiation being destructively inhibited in an anti-resonant cavity where the atomic resonance is exactly between two adjacent cavity resonances been proven. Herein, we present the first demonstration of the inhibited stimulated emission, which is termed an inhibited laser. Compared with traditional superradiant AOCs exhibiting superiority for the high suppression of cavity noise in lasers, the effect of cavity pulling on the inhibited laser's frequency can be further suppressed by a factor of (2F/π)^2. This study of the inhibited laser will guide further development of superradiant AOCs with better stability, and may lead to new searches in the cavity quantum electrodynamics (QED) field.

Solar cell design using graphene-based hollow nano-pillars

In this paper, the full solar spectrum coverage with an absorption efficiency above 96% is attained by shell-shaped graphene-based hollow nano-pillars on top of the refractory metal substrate. The material choice guarantees the high thermal stability of the device along with its robustness against harsh environmental conditions. To design the structure, constitutive parameters of graphene material in the desired frequency range are investigated and its absorption capability is illustrated by calculating the attenuation constant of the electromagnetic wave. It is observed that broadband absorption is a consequence of wideband retrieved surface impedance matching with the free-space intrinsic impedance due to the tapered geometry. Moreover, the azimuthal and longitudinal cavity resonances with different orders are exhibited for a better understanding of the underlying wideband absorption mechanism. Importantly, the device can tolerate the oblique incidence in a wide span around 65°, regardless of the polarization. The proposed structure can be realized by large-area fabrication techniques.

Using noise control principles when evaluating the acoustic impacts of face coverings during the coronavirus pandemic

Several different combinations of face masks and shields are evaluated for their acoustic performance using a head and torso simulator (HATS). The HATS is used as a controlled and repeatable artificial sound source using white noise in a classroom environment. Sound pressure levels at octave band frequencies due to the face coverings are evaluated at a location of 2.0 meters from the HATS which is within the direct field to reduce the room acoustical effects. The problem is modeled as a barrier separating a source and receiver using fundamental noise control principles. Fabric material properties are used such as thickness, density, stiffness, and damping. The results are compared with experimental tests. The face shield with clear plastic barrier produces a resonance in the 1000 Hz octave band. Analytical models of cavity resonances, standing wave resonances, or plate resonances are calculated and compared with the experimental resonance. The speech interference level is used to determine the frequency content that is most likely to cause hearing difficulties and compared with A-weighted differences between the unmasked condition and masked.

Overcoming thermo-optical dynamics in broadband nanophotonic sensing

Advances in integrated photonics open up exciting opportunities for batch-fabricated optical sensors using high-quality-factor nanophotonic cavities to achieve ultrahigh sensitivities and bandwidths. The sensitivity improves with increasing optical power; however, localized absorption and heating within a micrometer-scale mode volume prominently distorts the cavity resonances and strongly couples the sensor response to thermal dynamics, limiting the sensitivity and hindering the measurement of broadband time-dependent signals. Here, we derive a frequency-dependent photonic sensor transfer function that accounts for thermo-optical dynamics and quantitatively describes the measured broadband optomechanical signal from an integrated photonic atomic force microscopy nanomechanical probe. Using this transfer function, the probe can be operated in the high optical power, strongly thermo-optically nonlinear regime, accurately measuring low- and intermediate-frequency components of a dynamic signal while reaching a sensitivity of 0.7 fm/Hz1/2 at high frequencies, an improvement of ≈10× relative to the best performance in the linear regime. Counterintuitively, we discover that a higher transduction gain and sensitivity are achieved with lower quality-factor optical modes for low signal frequencies. Not limited to optomechanical transducers, the derived transfer function is generally valid for describing the small-signal dynamic responses of a broad range of technologically important photonic sensors subject to the thermo-optical effect.

1/f-noise-free optical sensing with an integrated heterodyne interferometer

Optical evanescent sensors can non-invasively detect unlabeled nanoscale objects in real time with unprecedented sensitivity, enabling a variety of advances in fundamental physics and biological applications. However, the intrinsic low-frequency noise therein with an approximately 1/f-shaped spectral density imposes an ultimate detection limit for monitoring many paramount processes, such as antigen-antibody reactions, cell motions and DNA hybridizations. Here, we propose and demonstrate a 1/f-noise-free optical sensor through an up-converted detection system. Experimentally, in a CMOS-compatible heterodyne interferometer, the sampling noise amplitude is suppressed by two orders of magnitude. It pushes the label-free single-nanoparticle detection limit down to the attogram level without exploiting cavity resonances, plasmonic effects, or surface charges on the analytes. Single polystyrene nanobeads and HIV-1 virus-like particles are detected as a proof-of-concept demonstration for airborne biosensing. Based on integrated waveguide arrays, our devices hold great potentials for multiplexed and rapid sensing of diverse viruses or molecules.

Lithography-free IR polarization converters via orthogonal in-plane phonons in α-MoO3 flakes

Exploiting polaritons in natural vdW materials has been successful in achieving extreme light confinement and low-loss optical devices and enabling simplified device integration. Recently, α-MoO3 has been reported as a semiconducting biaxial vdW material capable of sustaining naturally orthogonal in-plane phonon polariton modes in IR. In this study, we investigate the polarization-dependent optical characteristics of cavities formed using α-MoO3 to extend the degrees of freedom in the design of IR photonic components exploiting the in-plane anisotropy of this material. Polarization-dependent absorption over 80% in a multilayer Fabry-Perot structure with α-MoO3 is reported without the need for nanoscale fabrication on the α-MoO3. We observe coupling between the α-MoO3 optical phonons and the Fabry-Perot cavity resonances. Using cross-polarized reflectance spectroscopy we show that the strong birefringence results in 15% of the total power converted into the orthogonal polarization with respect to incident wave. These findings can open new avenues in the quest for polarization filters and low-loss, integrated planar IR photonics and in dictating polarization control.