Comparison of full-field interferometric measurement techniques applied to small vibration amplitudes determination

2014 ◽  
Author(s):  
Adam Styk
Keyword(s):  
Measurement Techniques ◽  
Small Vibration ◽  
Full Field ◽  
Interferometric Measurement

Investigating the Flexural Behaviour of Foams at High Strain Rate Using Optical Measurement Techniques

2013 ◽  
Vol 569-570 ◽  
pp. 799-804
Author(s):  
Duncan A. Crump ◽  
Janice M. Dulieu-Barton
Keyword(s):  
High Speed ◽  
Optical Measurement ◽  
Measurement Techniques ◽  
Maximum Load ◽  
Image Correlation ◽  
Test Machine ◽  
Full Field ◽  
Closed Cell ◽  
Load To Failure ◽  
Point Bend

Polymer closed cell foam beam specimens manufactured from H100 Divinycell (Diab) are tested in four point bend at three loading speeds using a specially designed rig and an Instron VHS test machine. Synchronised high speed images are captured using white light and infra-red thermography (IRT) to obtain the mid-point full-field deflection and strains using digital image correlation (DIC) along with the temperature evolutions. There is a marked increase in the maximum load to failure with loading rate and the optical techniques provide an opportunity to analyse the strain and temperature evolution within the specimens.

scholarly journals Nondestructive Testing of Ceramic Hip Joint Implants with Laser Spot Thermography

2017 ◽  
Vol 62 (4) ◽  
pp. 2133-2139
Author(s):  
J. Roemer ◽  
L. Pieczonka ◽  
M. Juszczyk ◽  
T. Uhl
Keyword(s):  
Damage Detection ◽  
Measurement Techniques ◽  
Infrared Camera ◽  
Field Measurements ◽  
Ceramic Materials ◽  
Test Sample ◽  
Theoretical Background ◽  
Laser Spot ◽  
Signal Acquisition ◽  
Full Field

AbstractThe paper presents an application of laser spot thermography for damage detection in ceramic samples with surface breaking cracks. The measurement technique is an active thermographic approach based on an external heat delivery to a test sample, by means of a laser pulse, and signal acquisition by an infrared camera. Damage detection is based on the analysis of surface temperature distribution near the exciting laser spot. The technique is nondestructive, non-contact and allows for full-field measurements. Surface breaking cracks are a very common type of damage in ceramic materials that are introduced in the manufacturing process or during the service period. This paper briefly discusses theoretical background of laser spot thermography, describes the experimental test rig and signal processing methods involved. Damage detection results obtained with laser spot thermography are compared with reference measurements obtained with vibrothermography. This is a different modality of active thermography, that has been previously proven effective for this type of damage. We demonstrate that both measurement techniques can be effectively used for damage detection and quality control applications of ceramic materials.

Assessing the Feasibility of Monitoring the Condition of Historic Tapestries Using Engineering Techniques

2007 ◽  
Vol 347 ◽  
pp. 187-192 ◽  
Author(s):  
Janice M. Dulieu-Barton ◽  
M. Sahin ◽  
F.J. Lennard ◽  
D.D. Eastop ◽  
A.R. Chambers
Keyword(s):  
Optical Fibre ◽  
Strain Measurement ◽  
Measurement Techniques ◽  
Mechanical Tests ◽  
Textile Material ◽  
Full Field ◽  
Strain Monitoring ◽  
Optical Strain Measurement ◽  
Optical Strain

The findings of a year-long programme carried out by a multidisciplinary engineering/conservation team are described. A mass-produced textile material that can be used to represent tapestries is identified and mechanical tests are detailed which demonstrate it behaves in a similar way to tapestry. The feasibility of using optical fibre sensors, full-field optical strain measurement techniques and thermography for monitoring tapestry degradation is assessed. The results of preliminary findings are presented and a rationale is developed for in-situ quantitative strain monitoring of tapestries.

scholarly journals R-curve evaluation of pipeline girth welds using advanced measurement techniques

2014 ◽  
Vol 5 (1) ◽  
pp. 10
Author(s):  
Nick Geldhof ◽  
Joeri Van Iseghem ◽  
Matthias Verstraete ◽  
Stijn Hertelé ◽  
Koen Van Minnebruggen ◽  
...  
Keyword(s):  
Crack Extension ◽  
Measurement Techniques ◽  
Potential Drop ◽  
Image Correlation ◽  
Assessment Procedure ◽  
Full Field ◽  
Resistance Curves ◽  
Unloading Compliance ◽  
Girth Welds ◽  
Tearing Resistance

A strain-based flaw assessment procedure is recommended for girth welded pipelines subjected to large deformations. To evaluate the allowable defect dimensions, the tearing resistance needs to be characterized. This paper investigates the effect of weld metal strength mismatch on the resistance curve using Single Edge Notched Tension (SENT) specimens. Several advanced measurement techniques are applied during the tests in order to obtain a continuous measurement of crack extension and to visualize the deformation fields near the crack. The resistance curves are determined using a single specimen technique. The unloading compliance method and the potential drop method result in similar predictions of ductile crack extension, yielding similar resistance curves. Next to these measurements, the full field deformations are determined using digital image correlation. The experiments indicate that the position of the applied notch in the weld has the potential to influence the strain fields.

Sign in / Sign up

Export Citation Format

Share Document