Improved design of 3D OLED display pixel configuration for higher efficiency

Author(s):  
Chang-Cheng Lee ◽  
Po-Hsiang Liao ◽  
Yi-Ting Chen ◽  
Sheng-Wen Wen ◽  
Chun-Wei Huang ◽  
...  
Keyword(s):  
Author(s):  
W.K. Lo ◽  
J.C.H. Spence

An improved design for a combination Scanning Tunnelling Microscope/TEM specimen holder is presented. It is based on earlier versions which have been used to test the usefulness of such a device. As with the earlier versions, this holder is meant to replace the standard double-tilt specimen holder of an unmodified Philips 400T TEM. It allows the sample to be imaged simultaneously by both the STM and the TEM when the TEM is operated in the reflection mode (see figure 1).The resolution of a STM is determined by its tip radii as well as its stability. This places strict limitations on the mechanical stability of the tip with respect to the sample. In this STM the piezoelectric tube scanner is rigidly mounted inside the endcap of the STM holder. The tip coarse approach to the sample (z-direction) is provided by an Inchworm which is located outside the TEM vacuum.


2019 ◽  
Vol 2019 (1) ◽  
pp. 104-107
Author(s):  
Ye Seul Baek ◽  
Youngshin Kwak ◽  
Sehyeok Park

The image quality is affected by the black luminance level of the image. This research aimed to investigate how low luminance levels are required to maintain image quality. The psychophysical experiment was carried out in a dark room using OLED display. Total of 6 different black luminance levels (0.003, 0.05, 0.1, 0.2, 0.3, and 1 cd/m2) were used in the experiment. Total of 20 participants was invited to evaluate the image quality. For the experiment, twelve test images are used and these test images categorized into three groups as dark, medium bright and bright image group by image histogram distribution. Each image is rendered by adjusting six different black luminance levels. Result found that the black level is higher than 0.1 cd/m2, the preference for the image is decreased. The best performance is achieved when the black level is 0.003 cd/m2, but there is no big difference from 0.1 cd/m2. The final result shows that a change in black level between about 0.003 cd/m2 and 0.1 cd/m2 does not significantly affect image quality.


2019 ◽  
Vol 2019 (1) ◽  
pp. 331-338 ◽  
Author(s):  
Jérémie Gerhardt ◽  
Michael E. Miller ◽  
Hyunjin Yoo ◽  
Tara Akhavan

In this paper we discuss a model to estimate the power consumption and lifetime (LT) of an OLED display based on its pixel value and the brightness setting of the screen (scbr). This model is used to illustrate the effect of OLED aging on display color characteristics. Model parameters are based on power consumption measurement of a given display for a number of pixel and scbr combinations. OLED LT is often given for the most stressful display operating situation, i.e. white image at maximum scbr, but having the ability to predict the LT for other configurations can be meaningful to estimate the impact and quality of new image processing algorithms. After explaining our model we present a use case to illustrate how we use it to evaluate the impact of an image processing algorithm for brightness adaptation.


Author(s):  
Zhiqiang Huang ◽  
Liyan Liu ◽  
Qin Li ◽  
Chengsong Qiu ◽  
Yachao Ma

PIERS Online ◽  
2005 ◽  
Vol 1 (5) ◽  
pp. 594-597 ◽  
Author(s):  
Boshi Jin ◽  
Haoyuan She ◽  
Yuemei Qin ◽  
Jiahui Fu ◽  
Qun Wu ◽  
...  

Author(s):  
B. F. Tarasenko B. F. ◽  
◽  
S. Y. Orlenko S. Y. ◽  
V. V. Kuzmin V. V.

The article presents a comparative analysis, based on field tests, of the quality of loosening of soil structures of the upper horizon with technical means developed at KubSAU and an improved design of a universal tillage unit.


Sign in / Sign up

Export Citation Format

Share Document