Characteristics of gas liquid solid three phase flow in wellbore

2021 ◽  
Author(s):  
Lei Ma ◽  
Weifeng Yang ◽  
Jiaming Huang ◽  
Qing Huang ◽  
Junlong Yang ◽  
...  
Mathematics ◽  
2021 ◽  
Vol 9 (13) ◽  
pp. 1460
Author(s):  
Abdulaziz S. Alkabaa ◽  
Ehsan Nazemi ◽  
Osman Taylan ◽  
El Mostafa Kalmoun

To the best knowledge of the authors, in former studies in the field of measuring volume fraction of gas, oil, and water components in a three-phase flow using gamma radiation technique, the existence of a scale layer has not been considered. The formed scale layer usually has a higher density in comparison to the fluid flow inside the oil pipeline, which can lead to high photon attenuation and, consequently, reduce the measuring precision of three-phase flow meter. The purpose of this study is to present an intelligent gamma radiation-based, nondestructive technique with the ability to measure volume fraction of gas, oil, and water components in the annular regime of a three-phase flow independent of the scale layer. Since, in this problem, there are several unknown parameters, such as gas, oil, and water components with different amounts and densities and scale layers with different thicknesses, it is not possible to measure the volume fraction using a conventional gamma radiation system. In this study, a system including a 241Am-133Ba dual energy source and two transmission detectors was used. The first detector was located diametrically in front of the source. For the second detector, at first, a sensitivity investigation was conducted in order to find the optimum position. The four extracted signals in both detectors (counts under photo peaks of both detectors) were used as inputs of neural network, and volume fractions of gas and oil components were utilized as the outputs. Using the proposed intelligent technique, volume fraction of each component was predicted independent of the barium sulfate scale layer, with a maximum MAE error of 3.66%.


Author(s):  
Lifeng Zhang

The tomographic imaging of process parameters for oil-gas-water three-phase flow can be obtained through different sensing modalities, such as electrical resistance tomography (ERT) and electrical capacitance tomography (ECT), both of which are sensitive to specific properties of the objects to be imaged. However, it is hard to discriminate oil, gas and water phases merely from reconstructed images of ERT or ECT. In this paper, the feasibility of image fusion based on ERT and ECT reconstructed images was investigated for oil-gas-water three-phase flow. Two cases were discussed and pixel-based image fusion method was presented. Simulation results showed that the cross-sectional reconstruction images of oil-gas-water three-phase flow can be obtained using the presented methods.


SPE Journal ◽  
2017 ◽  
Vol 22 (05) ◽  
pp. 1506-1518 ◽  
Author(s):  
Pedram Mahzari ◽  
Mehran Sohrabi

Summary Three-phase flow in porous media during water-alternating-gas (WAG) injections and the associated cycle-dependent hysteresis have been subject of studies experimentally and theoretically. In spite of attempts to develop models and simulation methods for WAG injections and three-phase flow, current lack of a solid approach to handle hysteresis effects in simulating WAG-injection scenarios has resulted in misinterpretations of simulation outcomes in laboratory and field scales. In this work, by use of our improved methodology, the first cycle of the WAG experiments (first waterflood and the subsequent gasflood) was history matched to estimate the two-phase krs (oil/water and gas/oil). For subsequent cycles, pertinent parameters of the WAG hysteresis model are included in the automatic-history-matching process to reproduce all WAG cycles together. The results indicate that history matching the whole WAG experiment would lead to a significantly improved simulation outcome, which highlights the importance of two elements in evaluating WAG experiments: inclusion of the full WAG experiments in history matching and use of a more-representative set of two-phase krs, which was originated from our new methodology to estimate two-phase krs from the first cycle of a WAG experiment. Because WAG-related parameters should be able to model any three-phase flow irrespective of WAG scenarios, in another exercise, the tuned parameters obtained from a WAG experiment (starting with water) were used in a similar coreflood test (WAG starting with gas) to assess predictive capability for simulating three-phase flow in porous media. After identifying shortcomings of existing models, an improved methodology was used to history match multiple coreflood experiments simultaneously to estimate parameters that can reasonably capture processes taking place in WAG at different scenarios—that is, starting with water or gas. The comprehensive simulation study performed here would shed some light on a consolidated methodology to estimate saturation functions that can simulate WAG injections at different scenarios.


Sign in / Sign up

Export Citation Format

Share Document