Amplitude object reconstruction from correlation function with violated central symmetry

2004 ◽  
Author(s):  
Mickolay M. Dominikov
Author(s):  
Alan Boyde ◽  
Milan Hadravský ◽  
Mojmír Petran ◽  
Timothy F. Watson ◽  
Sheila J. Jones ◽  
...  

The principles of tandem scanning reflected light microscopy and the design of recent instruments are fully described elsewhere and here only briefly. The illuminating light is intercepted by a rotating aperture disc which lies in the intermediate focal plane of a standard LM objective. This device provides an array of separate scanning beams which light up corresponding patches in the plane of focus more intensely than out of focus layers. Reflected light from these patches is imaged on to a matching array of apertures on the opposite side of the same aperture disc and which are scanning in the focal plane of the eyepiece. An arrangement of mirrors converts the central symmetry of the disc into congruency, so that the array of apertures which chop the illuminating beam is identical with the array on the observation side. Thus both illumination and “detection” are scanned in tandem, giving rise to the name Tandem Scanning Microscope (TSM). The apertures are arranged on Archimedean spirals: each opposed pair scans a single line in the image.


Vestnik MEI ◽  
2018 ◽  
Vol 2 (2) ◽  
pp. 123-128
Author(s):  
Pavel S. Gribov ◽  
◽  
Maria A. Gribova ◽  
Aleksandr Yu. Shatilov ◽  
◽  
...  

Author(s):  
Niels Engholm Henriksen ◽  
Flemming Yssing Hansen

This chapter discusses a direct approach to the calculation of the rate constant k(T) that bypasses the detailed state-to-state reaction cross-sections. The method is based on the calculation of the reactive flux across a dividing surface on the potential energy surface. Versions based on classical as well as quantum mechanics are described. The classical version and its relation to Wigner’s variational theorem and recrossings of the dividing surface is discussed. Neglecting recrossings, an approximate result based on the calculation of the classical one-way flux from reactants to products is considered. Recrossings can subsequently be included via a transmission coefficient. An alternative exact expression is formulated based on a canonical average of the flux time-correlation function. It concludes with the quantum mechanical definition of the flux operator and the derivation of a relation between the rate constant and a flux correlation function.


2020 ◽  
Vol 1515 ◽  
pp. 042105
Author(s):  
D M Malinichev ◽  
E A Melnikova ◽  
Y V Prus

1999 ◽  
Vol 9 (6) ◽  
pp. 246-253 ◽  
Author(s):  
E. O. Arikainen ◽  
J. C. Earnshaw ◽  
A. Wehling ◽  
E. Waghorne

Abstract Diffusing wave spectroscopy (DWS) in the backscattering geometry was employed to observe the evolution of the intensity correlation function during the acidification of skimmed milk by gluconic-δ-lactone (GDL). At the stage when the formation of casein particle gel is largely complete the correlation function at shorter decay times reveals the local structural arrest of the casein micelles, whereas at longer delay times it illustrates the hindered slow motion of casein micelle aggregates. We use the principles of the approach suggested by Mason, Gang and Weitz, linking the optically measured mean square displacement, <Δr2(t)>, of the microscopic particles in a dense colloid to its viscoelastic properties, to provide an estimate of the frequency dependent viscoelastic modulus of the acidified milk gel (AMG). We compare the viscoelastic moduli measured by the conventional mechanical rheometry with the optically measured ones. The results of the two different experimental methods are found to be in reasonable agreement.


Sign in / Sign up

Export Citation Format

Share Document