Storage of CO2 and Coal Fly Ash using Pickering Foam for Enhanced Oil Recovery

CO2 foams have been used for a long time for enhanced oil recovery (EOR) and carbon capture, utilization, and storage. Note that conventional CO2 foam focuses on mobility control and storage of bare CO2. However, this technology has suffered from low storage efficiency and EOR because of foam instability. In this study, the geological storage of CO2 and coal fly ash (CFA) using Pickering foam for EOR was explored. The aim is to obtain an inexpensive method for EOR and storage of greenhouse gases and atmospheric pollutants. The Pickering foam was prepared using Waring blender method. The experiments were conducted to evaluate CO2/liquid interface enhancement by measuring the interfacial tension and interfacial viscoelastic modulus. As per the heterogeneous sandpack flooding experiments, the profile control capacity and the performance of oil displacement using CO2 foam enhanced by CFA were investigated. The amount of storage from dynamic aspects of CO2 and CFA was measured to demonstrate the storage law. The stability of aqueous foam was improved significantly after the addition of CFA. The half-life time of foam stabilized by CFA particles increased by more than about 11 times than that of foam without CFA particles. The interfacial dilatational viscoelastic modulus of CO2/foaming solution increased with CFA particle concentration increasing, indicating the interface transformed from liquid-like to solid-like. Flooding experiments in heterogeneous porous media showed that more produced fluid was displaced from the relatively low-permeability sandpack after the injection of CO2 foam with CFA. The oil recovery by CFA stabilized foam was improved by ~28.3% than that of foam without CFA particles. And the sequestration of CO2 in heterogeneous porous media was enhanced with the addition of CFA to CO2 foam, and the CFA stabilized foam displayed a strong resistance to water erosion for the storage of CO2 and CFA. This work introduces a win–win method for EOR and storage of CO2 and atmospheric pollutant particles. CFA from coal combustion was used as an enhancer for CO2 foam, which improved the interfacial dilatational viscoelasticity of foam film and the dynamic storage of CO2. Furthermore, the storage of CO2 and CFA contributed to improvement in sweep efficiency, and thus EOR.

On Opening Crack Propagation in Viscoelastic Solids

We show that the Persson-Brener theory of crack propagation in viscoelastic solids gives a viscoelastic fracture energy factor $$G/G_0 = 1+f$$ G / G 0 = 1 + f which is nearly the same as the viscoelastic factor obtained using the cohesive-zone model. We also discuss finite size effects and comment on the use of crack propagation theories for “solids” with a viscoelastic modulus that vanishes at zero frequency. Graphical Abstract

Single-Particle Tracking Reveals Anti-Persistent Subdiffusion in Cell Extracts

Single-particle tracking (SPT) has become a powerful tool to quantify transport phenomena in complex media with unprecedented detail. Based on the reconstruction of individual trajectories, a wealth of informative measures become available for each particle, allowing for a detailed comparison with theoretical predictions. While SPT has been used frequently to explore diffusive transport in artificial fluids and inside living cells, intermediate systems, i.e., biochemically active cell extracts, have been studied only sparsely. Extracts derived from the eggs of the clawfrog Xenopus laevis, for example, are known for their ability to support and mimic vital processes of cells, emphasizing the need to explore also the transport phenomena of nano-sized particles in such extracts. Here, we have performed extensive SPT on beads with 20 nm radius in native and chemically treated Xenopus extracts. By analyzing a variety of distinct measures, we show that these beads feature an anti-persistent subdiffusion that is consistent with fractional Brownian motion. Chemical treatments did not grossly alter this finding, suggesting that the high degree of macromolecular crowding in Xenopus extracts equips the fluid with a viscoelastic modulus, hence enforcing particles to perform random walks with a significant anti-persistent memory kernel.

Evaluation of the rheological properties of the dough and the characteristics of the bread with the addition of purple potato

The aim of this study was to determine the rheological characteristics of the dough at the addition of purple potato powder in different quantities (0-100 g). The wheat flour types 480 and 1250 were used. The rheological characteristics of the dough were determined with the help of Chopin Alveograph analyzing the tensile strength. The rheological measurements were made with the HAAKE RheoWin Mars 40 rheometer and the dough’s viscoelastic modulus was analyzed at the frequency of 1-20 Hz. The bread samples were analyzed in terms of volume, porosity, color and texture. The textural parameters determined with the help of the texturometer were the elasticity, adhesiveness and stickiness of the bread crumb. It has been found that the addition of purple potato dough does not adversely alter the rheological properties of the dough. The elasticity and stickiness of the bread core increases with the increase of potato addition in the case of whole-grain flour. The color of the bread intensifies as the dose of purple potato powder increases.

Assessing the Interfacial Dynamic Modulus of Biological Composites

Biological composites (biocomposites) possess ultra-thin, irregular-shaped, energy dissipating interfacial regions that grant them crucial mechanical capabilities. Identifying the dynamic (viscoelastic) modulus of these interfacial regions is considered to be the key toward understanding the underlying structure–function relationships in various load-bearing biological materials including mollusk shells, arthropod cuticles, and plant parts. However, due to the submicron dimensions and the confined locations of these interfacial regions within the biocomposite, assessing their mechanical characteristics directly with experiments is nearly impossible. Here, we employ composite-mechanics modeling, analytical formulations, and numerical simulations to establish a theoretical framework that links the interfacial dynamic modulus of a biocomposite to the extrinsic characteristics of a larger-scale biocomposite segment. Accordingly, we introduce a methodology that enables back-calculating (via simple linear scaling) of the interfacial dynamic modulus of biocomposites from their far-field dynamic mechanical analysis. We demonstrate its usage on zigzag-shaped interfaces that are abundant in biocomposites. Our theoretical framework and methodological approach are applicable to the vast range of biocomposites in natural materials; its essence can be directly employed or generally adapted into analogous composite systems, such as architected nanocomposites, biomedical composites, and bioinspired materials.

Ultrasound-Assisted Water Extraction of Mastocarpus stellatus Carrageenan with Adequate Mechanical and Antiproliferative Properties

Ultrasound-assisted water extraction was optimized to recover gelling biopolymers and antioxidant compounds from Mastocarpus stellatus. A set of experiments following a Box–Behnken design was proposed to study the influence of extraction time, solid liquid ratio, and ultrasound amplitude on the yield, sulfate content, and thermo-rheological properties (viscoelasticity and gelling temperature) of the carrageenan fraction, as well as the composition (protein and phenolic content) and antiradical capacity of the soluble extracts. Operating at 80 °C and 80 kHz, the models predicted a compromise optimum extraction conditions at ~35 min, solid liquid ratio of ~2 g/100 g, and ultrasound amplitude of ~79%. Under these conditions, 40.3% carrageenan yield was attained and this product presented 46% sulfate and good mechanical properties, a viscoelastic modulus of 741.4 Pa, with the lowest gelling temperatures of 39.4 °C. The carrageenans also exhibited promising antiproliferative properties on selected human cancer cellular lines, A-549, A-2780, HeLa 229, and HT-29 with EC50 under 51.9 μg/mL. The dried soluble extract contained 20.4 mg protein/g, 11.3 mg gallic acid eq/g, and the antiradical potency was equivalent to 59 mg Trolox/g.

Effect of Polyethylene Oxide on the Rheological Behavior of Bentonite Suspensions

The effect of Polyethylene Oxide (PEO) with a molecular weight 10000g/mol on the rheological behavior of bentonite suspension was examined in terms of viscosity, yield stress and viscoelastic modulus (G’ and G’’); characteristic of complex behaviour of montmorillonite in water. A Physica MCR301 rheometer has been used to measure the rheological properties of samples (6% bentonite) as well as bentonite-PEO mixtures at different concentrations of PEO (0.18%, 0.25%, 0.5% and 1%). The polyethylene oxide adsorbs onto clay particles, which changes their basic characteristics depending on the amount of PEO adsorbed.

On Opening Crack Propagation in Viscoelastic Solids

We show that the Persson-Brener theory of crack propagation in viscoelastic solids gives a viscoelastic fracture energy factor G/G0 = 1 + f which is nearly the same as the viscoelastic factor obtained using the cohesive-zone model. We also discuss finite-size effects and comment on the use of crack propagation theories for “solids” with a viscoelastic modulus that vanishes at zero frequency.

Effect of Surfactant Molecular Structure on Emulsion Stability Investigated by Interfacial Dilatational Rheology

Polyglycerol polyricinolate (PGPR) and polyglycerol-2 dioleate were selected as model surfactants to construct water-in-oil (W/O) emulsions, and the effect of interfacial rheological properties of surfactant film on the stability of emulsions were investigated based on the interfacial dilatational rheological method. The hydrophobicity chain of PGPR is polyricinic acid condensed from ricinic acid, and that of polyglycerol-2 dioleate is oleic acid. Their dynamic interfacial tensions in 15 cycles of interfacial compression-expansion were determined. The interfacial dilatational viscoelasticity was analyzed by amplitude scanning in the range of 1–28% amplitude and frequency sweep in the range of 5–45 mHz under 2% amplitude. It was found that PGPR could quickly reach adsorption equilibrium and form interfacial film with higher interfacial dilatational viscoelastic modulus to resist the deformation of interfacial film caused by emulsion coalescence, due to its branched chain structure and longer hydrophobic chain, and the emulsion thus presented good stability. However, polyglycerol-2 dioleate with a straight chain structure had lower interfacial tension, and it failed to resist the interfacial disturbance caused by coalescence because of its lower interfacial dilatational viscoelastic modulus, and thus the emulsion was unstable. This study reveals profound understanding of the influence of branched structure of PGPR hydrophobic chain on the interfacial film properties and the emulsion stability, providing experimental reference and theoretical guidance for future design or improvement of surfactant.

Rheological Investigation of Thermoresponsive Alginate-Methylcellulose Gels for Epidermal Growth Factor Formulation

Epidermal growth factors (EGF) serve as promising candidates for skin regeneration and rejuvenation products, but their instability hinders them from widespread use. Protective immobilization and directed release can be achieved through implementing a hydrogel delivery system. Alginate and methylcellulose are both natural polymers offering biocompatibility and environmental sensitivity. This blended gel system was investigated rheologically to understand its performance in topical applications. Alginate and methylcellulose were found to form a synergistic gel system that resulted in superior viscosity and thermoresponsiveness compared to the individual components. Increasing methylcellulose concentration directly enhanced gel elasticity, and higher viscosities provided better thermal protection of EGF. The addition of EGF at 3.33 mg/mL resulted in a decrease of viscosity but an increase in viscoelastic modulus. EGF concentration also played a large role in shear viscosity and thermoresponsiveness of the ternary system. An alginate-methylcellulose system presents promising rheological tunability, which may provide EGF thermal protection in a topical delivery format.