Optoacoustic temperature monitoring during HIFU impact on biological tissues: ex vivo study and numerical simulations of 2D temperature reconstruction

2012 ◽  
Author(s):  
Sergey Nikitin ◽  
Tatiana Khokhlova ◽  
Ivan Pelivanov
2021 ◽  
Author(s):  
Younan Li ◽  
Weiwei Wu ◽  
Xiaozheng Liu ◽  
Maoying Pang ◽  
Guangyu Wang ◽  
...  

Abstract Purpose: To improve the current microwave ablation catheter from causing injury by the over-temperature of catheter during the therapy. A new microwave ablation catheter with water-cooling circulation system and temperature-monitoring system was designed. Its effectiveness was verified in an ex vivo study. Materials and Methods: According to the theory that the heat can be transferred by convection between different mediums to balance the temperature. Designing water-cooling circulation system and temperature-monitoring system based on the microwave ablation catheter. Comparing the temperature of the catheters with or without water-cooling circulation system and comparing the range of ablation tissues by testing on the pork to verify its effectiveness. Results: The temperature of the MWAC without water-cooling circulation system would increase as using times increased. It would be over 45℃ after using the instrument for 3 times continuously, and the range of ablation tissues extends with injury. The temperature of the microwave ablation catheter with water-cooling circulation system would not be over 45℃ after using it for 50 times continuously, and it would not cause injury. Conclusion: The new microwave ablation catheter with water-cooling circulation system and temperature-monitoring system can constantly monitor the temperature and lower the temperature while using the instrument to prevent the patients’ native issue and medical staffs from burning, it can control the ablation range more efficiently and safer.


2020 ◽  
Author(s):  
Rafael Heiss ◽  
Frank W. Roemer ◽  
Christoph Lutter ◽  
Rolf Janka ◽  
Volker Schöffl ◽  
...  

2014 ◽  
Author(s):  
Klaus Engelke ◽  
Nicolas Bouler ◽  
Oleg Museyko Fuerst ◽  
Sebastien Parratte ◽  
Thomas Fuerst ◽  
...  

2020 ◽  
Vol 26 (6) ◽  
pp. 667-670
Author(s):  
Thomas Larrew ◽  
Mohammed Alshareef ◽  
Robert F. Murphy ◽  
Ramin Eskandari ◽  
Libby Kosnik Infinger

OBJECTIVEAlthough the advent of magnetic growing rod technology for scoliosis has provided a means to bypass multiple hardware lengthening operations, it is important to be aware that many of these same patients have a codiagnosis of hydrocephalus with magnet-sensitive programmable ventricular shunts. As the magnetic distraction of scoliosis rods has not previously been described to affect the shunt valve setting, the authors conducted an investigation to characterize the interaction between the two devices.METHODSIn this ex vivo study, the authors carried out 360 encounters between four different shunt valve types at varying distances from the magnetic external remote control (ERC) used to distract the growing rods. Valve settings were examined before and after every interaction with the remote control to determine if there was a change in the setting.RESULTSThe Medtronic Strata and Codman Hakim valves were found to have setting changes at distances of 3 and 6 inches but not at 12 inches. The Aesculap proGAV and Codman Certas valves, typically described as MRI-resistant, did not have any setting changes due to the magnetic ERC regardless of distance.CONCLUSIONSAlthough it is not necessary to check a shunt valve after every magnetic distraction of scoliosis growing rods, if there is concern that the magnetic ERC may have been within 12 inches (30 cm) of a programmable ventricular shunt valve, the valve should be checked at the bedside with a programmer or with a skull radiograph along with postdistraction scoliosis radiographs.


2016 ◽  
Vol 16 (12) ◽  
pp. 1615-1621 ◽  
Author(s):  
Erik Andrade-Jorge ◽  
Marycarmen Godínez-Victoria ◽  
Luvia Enid Sánchez-Torres ◽  
Luis Humberto Fabila-Castillo ◽  
José G. Trujillo-Ferrara

2020 ◽  
pp. bjophthalmol-2020-317214
Author(s):  
Hasan Naveed ◽  
Fong May Chew ◽  
Hanbin Lee ◽  
Edward Hughes ◽  
Mayank A Nanavaty

PurposeTo assess whether pars plana vitrectomy (PPV) is an aerosol-generating procedure (AGP) in an ex vivo experimental model.MethodsIn this ex vivo study on 10 porcine eyes, optical particle counter was used to measure particles ≤10 μm using cumulative mode in the six in-built channels: 0.3 μm, 0.5 μm, 1 μm, 2.5 μm, 5 μm and 10 μm aerosols during PPV. Two parts of the study were as follows: (1) to assess the pre-experimental baseline aerosol count in the theatre environment where there are dynamic changes in temperature and humidity and (2) to measure aerosol generation with 23-gauge and 25-gauge set-up. For each porcine eye, five measurements were taken for each consecutive step in the experiment including pre-PPV, during PPV, fluid–air exchange (FAX) and venting using a flute with 23-gauge set-up and a chimney with 25-gauge set-up. Therefore, a total of 200 measurements were recorded.ResultsWith 23-gauge and 25-gauge PPV, there was no significant difference in aerosol generation in all six channels comparing pre-PPV versus PPV or pre-PPV versus FAX. Venting using flute with 23-gauge PPV showed significant reduction of aerosol ≤1 μm. Air venting using chimney with 25-gauge set-up showed no significant difference in aerosol of ≤1 μm. For cumulative aerosol counts of all particles measuring ≤5 μm, compared with pre-PPV, PPV or FAX, flute venting in 23-gauge set-up showed significant reduction unlike the same comparison for chimney venting in 25-gauge set-up.ConclusionPPV and its associate steps do not generate aerosols ≤10 μm with 23-gauge and 25-gauge set-ups.


2019 ◽  
Vol 45 (4) ◽  
pp. 1092-1099
Author(s):  
Roberto Cannella ◽  
Mohammed Shahait ◽  
Alessandro Furlan ◽  
Feng Zhang ◽  
Joel D. Bigley ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document