Secondary normal faulting in the Lake Mead fault system and implications for regional fault mechanics

Author(s):  
Scott T. Marshall ◽  
Simon A. Kattenhorn ◽  
Michele L. Cooke

Active and recent faulting along the main north—south road in Tibet is dominated by normal faulting occurring on northerly-trending planes and by strike-slip faulting, both of which reflect an east-west extension of the plateau. Normal faulting is prevalent in the southern half of the plateau, but we saw no evidence for any major graben in the northern half. Strike-slip faulting on roughly easterly-trending structures is m ore prevalent in the northern half, but conjugate faulting, with right-lateral slip on northwesterly-trending planes and left-lateral slip on northeasterly-trending planes, is common in the southern half. In two areas, we also observed components of thrust faulting, apparently in association with young strikeslip faulting. Our most important results are bounds on the rates of slip on the two main strands of the Kunlun strike-slip fault system, which trends east-w est through the Kunlun range. Ground moraine containing boulders of pyroxenite is separated by 30 km from the nearest outcrop of such rock, implying that amount of displacement in the last 1.5 to 3 M a. Therefore the average rate of slip during the Quaternary period has been between 10 and 20 mm/a , with a likely value of 13 mm/a . Abundant fresh tension cracks and mole tracks imply continued slip on the main strand, the Xidatan -Tuosuohu-Maqu fault, and the likely occurrence of a major earthquake in the last few hundred years. Consistent offsets of gullies and dry stream channels of about 10 m may reflect slip of that amount during such an earthquake, and possible multiple offsets at one site suggest that slip may occur by large displacements of 10 m during infrequent great earthquakes. Along the other strand, the Kunlun Pass fault, offsets of roughly 50 to 150 m of, apparently, post-glacial valleys and of one glacier and its terminal moraine suggest a Holocene rate of slip between 5 and 20 mm/a , and most likely about 10 mm/a , on this fault. These rapid rates of displacement imply that Tibet is being extruded rapidly eastward, at a rate com parable to the rate at which India is penetrating into Eurasia, and therefore that, at present, a substantial fraction of this penetration is being absorbed by the eastward extrusion of Tibet.


2021 ◽  
Author(s):  
Simone Masoch ◽  
Rodrigo Gomila ◽  
Michele Fondriest ◽  
Erik Jensen ◽  
Tom Mitchell ◽  
...  

<p>The nucleation and evolution of major crustal-scale seismogenic faults in the crystalline basement as well as the process of strain localization represent a long-standing, but poorly understood, issue in structural geology and fault mechanics. Here, we addressed the spatio-temporal evolution of the Bolfin Fault Zone (BFZ), a >40-km-long exhumed seismogenic splay fault of the 1000-km-long strike-slip Atacama Fault System. The BFZ has a sinuous fault trace across the Mesozoic magmatic arc of the Coastal Cordillera (Northern Chile). Seismic faulting occurred at 5-7 km depth and ≤ 270 °C in a fluid-rich environment as recorded by extensive propylitic alteration and epidote-chlorite veining. The ancient (125-118 Ma) seismicity is attested by the widespread occurrence of pseudotachylytes both in the fault core and in the damage zone. Field geological surveys indicate nucleation of the BFZ on precursory geometrical anisotropies represented by magmatic foliation of plutons (northern and central segments) and andesitic dyke swarms (southern segment) within the heterogeneous crystalline basement. Faulting exploited the segments of precursory anisotropies that were favorably oriented with respect to the long-term stress field associated with the oblique ancient subduction. The large-scale sinuous geometry of the BFZ may result from linkage of these anisotropy-pinned segments during fault growth. This evolution may provide a model to explain the complex fault pattern of the crustal-scale Atacama Fault System.</p>


2021 ◽  
Author(s):  
◽  
Vasiliki Mouslopoulou

<p>The North Island of New Zealand sits astride the Hikurangi margin along which the oceanic Pacific Plate is being obliquely subducted beneath the continental Australian Plate. The North Island Fault System1 (NIFS), in the North Island of New Zealand, is the principal active strike-slip fault system in the overriding Australian Plate accommodating up to 30% of the margin parallel plate motion. This study focuses on the northern termination of the NIFS, near its intersection with the active Taupo Rift, and comprises three complementary components of research: 1) the investigation of the late Quaternary (c. 30 kyr) geometries and kinematics of the northern NIFS as derived from displaced geomorphic landforms and outcrop geology, 2) examination of the spatial and temporal distribution of  paleoearthquakes in the NIFS over the last 18 kyr, as derived by fault-trenching and displaced landforms, and consideration of how these distributions may have produced the documented late Quaternary (c. 30 kyr) kinematics of the northern NIFS, and 3) Investigation of the temporal stability of the late Quaternary (c. 30 kyr) geometries and kinematics throughout the Quaternary (1-2 Ma), derived from gravity, seismic-reflection, drillhole, topographic and outcrop data. The late Quaternary (c. 30 kyr) kinematics of the northern NIFS transition northward along strike, from strike-slip to oblique-normal faulting, adjacent to the rift. With increasing proximity to the Taupo Rift the slip vector pitch on each of the faults in the NIFS steepens gradually by up to 60 degrees, while the mean fault-dip decreases from 90 degrees to 60 degrees W. Adjustments in the kinematics of the NIFS reflect the gradual accommodation of the NW-SE extension that is distributed outside the main physiographic boundary of the Taupo Rift. Sub-parallelism of slip vectors in the NIFS with the line of intersection between the two synchronous fault systems reduces potential space problems and facilitates the development of a kinematically coherent fault intersection, which allows the strike-slip component of slip to be transferred into the rift. Transfer of displacement from the NIFS into the rift accounts for a significant amount of the northeastward increase of extension along the rift. Steepening of the pitch of slip vectors towards the northern termination of the NIFS allows the kinematics and geometry of faulting to change efficiently, from strike-lip to normal faulting, providing an alternative mechanism to vertical axis rotations for terminating large strike-lip faults. Analyses of kinematic constraints from worldwide examples of synchronous strike-lip and normal faults that intersect to form two or three plate configurations, within either oceanic or continental crust, suggest that displacement is often transferred between the two fault systems in a similar manner to that documented at the NIFS - Taupo Rift fault intersection. The late Quaternary (c. 30 kyr) change in the kinematics of the NIFS along strike, from dominantly strike-slip to oblique-normal faulting, arises due to a combination of rupture arrest during individual earthquakes and variations in the orientation of the coseismic slip vectors. At least 80 % of all surface rupturing earthquakes appear to have terminated within the kinematic transition zone from strike-slip to oblique-normal slip. Fault segmentation reduces the magnitudes of large surface rupturing earthquakes in the northern NIFS from 7.4-7.6 to c. 7.0. Interdependence of throw rates between the NIFS and Taupo Rift suggests that the intersection of the two fault systems has functioned coherently for much of the last 0.6-1.5 Myr. Oblique-normal slip faults in the NIFS and the Edgecumbe Fault in the rift accommodated higher throw rates since 300 kyr than during the last 0.6-1.5 Myr. Acceleration of these throw rates may have occurred in response to eastward migration of rifting, increasing both the rates of faulting and the pitch of slip vectors. The late Quaternary (e.g. 30 kyr) kinematics, and perhaps also the stability, of the intersection zone has been geologically short lived and applied for the last c. 300 kyr.</p>


2020 ◽  
Author(s):  
Marc Regnier ◽  
Gabriela Ponce ◽  
Marianne Saillard ◽  
Laurence Audin ◽  
Sandro Vaca ◽  
...  

&lt;p&gt;Along the Ecuadorian margin, the North Andean Sliver is moving in the northeastward direction due to the oblique subduction of the Nazca plate. The opening of the gulf of Guayaquil is a consequence of this motion. Two principal models compete to explain the opening. One proposes an opening achieved essentially with strike-slip motion along a single major fault through the gulf, the other with a combination of strike-slip and normal faulting on both sides of the gulf. The consequences in term of seismic hazard are very different. A single strike-slip fault model could imply a long fault segment capable of generating large magnitude events. In contrast, a multi-segments composite fault system will give conditions for producing small to medium size earthquakes. The southern Ecuador subduction zone is characterized by the absence of large historical earthquake. Data from the historical and instrumental seismicity for magnitude above 4 show the forearc has a high level of moderate seismic activity within and around the gulf that connects to the crustal seismic activity of the volcanic arc. In contrast, the forearc elsewhere shows very little or no seismic activity between the marine forearc zone and the volcanic arc. Regional and global CMTS data show a large number of mechanisms within the gulf that do not line up on a simple straight fault system. We present new earthquake data from the recently upgraded national seismic network of Ecuador. They provide the first image of SW-NE trending crustal faults stretching in the central part of the gulf and running eastward south of the Puna island. The main seismic belt appears to be discontinuous, made of short length segments with variable trends. The variety of focal solutions also indicates complex faulting. As the shape of this seismic belt is in good agreement with the orientation of the GPS velocity vectors, this new fault zone is readily interpreted as the southernmost segment of the actual NAS boundary. Others seismic clusters are observed parallel to the northern coast of the gulf, indicating active structures eventually accommodating the North-South opening of the gulf through normal faulting. b-value analysis of the main seismic belt seismicity shows high b value (&gt;1) indicating either highly fractured or heterogeneous medium, or/and low stress level within the gulf of Guayaquil. This is again in agreement with a multi-segmented faulting system and also with the lack of large magnitude event in the historical seismic data. A cross-section for the entire seismic belt shows a depth extend of the crustal seismic activity down to 30 km which confirms the seismic belt to be a sliver boundary.&lt;/p&gt;


2018 ◽  
Author(s):  
Nicholas H. Hinz ◽  
◽  
Seth M. Dee ◽  
Eugene Smith ◽  
Racheal Johnsen
Keyword(s):  

Geology ◽  
1989 ◽  
Vol 17 (11) ◽  
pp. 1057 ◽  
Author(s):  
John W. Geissman ◽  
Steve S. Harlan ◽  
Timothy F. Wawrzyniec

Sign in / Sign up

Export Citation Format

Share Document