Interfacial Synthesis: Morphology, Structure, and Properties of Interfacial Formations in Liquid–Liquid Systems

Self-assembly of colloidal spheres is the most frequently used method for structural colors, but the chroma of the structural colors is usually so low that people cannot observe it under natural conditions. This paper presents a facile method for fabrications of vivid structural colors by doping carbon black into the self-assembly of colloidal polymer spheres and nanosilica particles. This approach can generate very gorgeous structural colors which can be very easily seen under natural conditions. The fabrication conditions for the self-assembly of composite dispersions of polymer/silica/carbon black were optimized to obtain colloidal crystals with vivid colors. Thus, robust mechanical properties, large-scale, and brilliant structural colors can guarantee the obtained crystal films to find practical applications, which are demonstrated by the fact that the successful applications of structural colors beautify the original simple and tedious surface of bamboo strand board (BSB).

Download Full-text

Fabrication of Hollow Silica Particles Using a Self-Assembled Polyethylene Granule as a Template

Journal of Nanomaterials ◽

10.1155/2018/4979260 ◽

2018 ◽

Vol 2018 ◽

pp. 1-9

Author(s):

Sang-Yul Park ◽

Hyo-Sun Kim ◽

Jeseung Yoo ◽

Young-Soo Seo

Keyword(s):

Self Assembly ◽

Cost Effective ◽

Acid Value ◽

Silica Coating ◽

Silica Particles ◽

The Self ◽

Hollow Silica ◽

Practical Applications ◽

Self Assembled ◽

Hollow Silica Particles

We developed a novel method preparing nonspherical hollow silica particles (HSP) using a micron-sized granule self-assembled from partially oxidized PE wax. The morphology of the granule was closely investigated in terms of concentration and acid value of PE wax and cooling rate. Due to the oxidized unit in PE wax, magnetic nanoparticle was incorporated into the granule during the self-assembly, and silica was coated on the granule surface via the self-assembly. Silica-coating condition was studied by varying water content and reaction time. After the PE wax was removed by calcination, nonspherical HSP or magnetic HSP was obtained. This cost-effective HSP is expected to be useful for practical applications.

Download Full-text

The Nature of Rapidly Extracted Phycocyanin from the Blue-Green Alga Plectonema Boryanum

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100065870 ◽

1971 ◽

Vol 29 ◽

pp. 366-367

Author(s):

M. Kessel ◽

R. MacColl

Keyword(s):

Self Assembly ◽

Analytical Ultracentrifugation ◽

Uranyl Acetate ◽

The Self ◽

Major Protein ◽

Subunit Structure ◽

Blue Green Alga ◽

Thin Sections ◽

Blue Green Algae ◽

Cacodylate Buffer

The major protein of the blue-green algae is the biliprotein, C-phycocyanin (Amax = 620 nm), which is presumed to exist in the cell in the form of distinct aggregates called phycobilisomes. The self-assembly of C-phycocyanin from monomer to hexamer has been extensively studied, but the proposed next step in the assembly of a phycobilisome, the formation of 19s subunits, is completely unknown. We have used electron microscopy and analytical ultracentrifugation in combination with a method for rapid and gentle extraction of phycocyanin to study its subunit structure and assembly.To establish the existence of phycobilisomes, cells of P. boryanum in the log phase of growth, growing at a light intensity of 200 foot candles, were fixed in 2% glutaraldehyde in 0.1M cacodylate buffer, pH 7.0, for 3 hours at 4°C. The cells were post-fixed in 1% OsO4 in the same buffer overnight. Material was stained for 1 hour in uranyl acetate (1%), dehydrated and embedded in araldite and examined in thin sections.

Download Full-text

Interrelationship of the cellular distribution and secretion of regular structure (RS) protein in Bacillus licheniformis nm 105

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100123969 ◽

1992 ◽

Vol 50 (1) ◽

pp. 712-713

Author(s):

Xiaorong Zhu ◽

Richard McVeigh ◽

Bijan K. Ghosh

Keyword(s):

Alkaline Phosphatase ◽

Bacillus Licheniformis ◽

Self Assembly ◽

Gel Electrophoresis ◽

Culture Supernatant ◽

Regular Structure ◽

The Self ◽

Cellular Distribution ◽

Structural Protein ◽

Laboratory Cultures

A mutant of Bacillus licheniformis 749/C, NM 105 exhibits some notable properties, e.g., arrest of alkaline phosphatase secretion and overexpression and hypersecretion of RS protein. Although RS is known to be widely distributed in many microbes, it is rarely found, with a few exceptions, in laboratory cultures of microorganisms. RS protein is a structural protein and has the unusual properties to form aggregate. This characteristic may have been responsible for the self assembly of RS into regular tetragonal structures. Another uncommon characteristic of RS is that enhanced synthesis and secretion which occurs when the cells cease to grow. Assembled RS protein with a tetragonal structure is not seen inside cells at any stage of cell growth including cells in the stationary phase of growth. Gel electrophoresis of the culture supernatant shows a very large amount of RS protein in the stationary culture of the B. licheniformis. It seems, Therefore, that the RS protein is cotranslationally secreted and self assembled on the envelope surface.

Download Full-text

Nanoscale Self-Assembly Using Ion and Electron Beam Techniques: A Rapid Review

MRS Advances ◽

10.1557/adv.2020.349 ◽

2020 ◽

Vol 5 (64) ◽

pp. 3507-3520

Author(s):

Chunhui Dai ◽

Kriti Agarwal ◽

Jeong-Hyun Cho

Keyword(s):

Electron Beam ◽

Self Assembly ◽

Ion Beam ◽

Three Dimensional ◽

The Self ◽

Stress Generation ◽

Rapid Review ◽

High Yield ◽

3D Nanostructures ◽

Self Assembled

AbstractNanoscale self-assembly, as a technique to transform two-dimensional (2D) planar patterns into three-dimensional (3D) nanoscale architectures, has achieved tremendous success in the past decade. However, an assembly process at nanoscale is easily affected by small unavoidable variations in sample conditions and reaction environment, resulting in a low yield. Recently, in-situ monitored self-assembly based on ion and electron irradiation has stood out as a promising candidate to overcome this limitation. The usage of ion and electron beam allows stress generation and real-time observation simultaneously, which significantly enhances the controllability of self-assembly. This enables the realization of various complex 3D nanostructures with a high yield. The additional dimension of the self-assembled 3D nanostructures opens the possibility to explore novel properties that cannot be demonstrated in 2D planar patterns. Here, we present a rapid review on the recent achievements and challenges in nanoscale self-assembly using electron and ion beam techniques, followed by a discussion of the novel optical properties achieved in the self-assembled 3D nanostructures.

Download Full-text

Bottom-up Evolution from Disks to High-Genus Polymersomes

10.26434/chemrxiv.6108467.v1 ◽

2018 ◽

Author(s):

Claudia Contini ◽

Russell Pearson ◽

Linge Wang ◽

Lea Messager ◽

Jens Gaitzsch ◽

...

Keyword(s):

Self Assembly ◽

The Self ◽

Amphiphilic Copolymers ◽

Chain Entanglement ◽

Bottom Up ◽

New Approach ◽

High Genus ◽

Transmission Electron ◽

Minimal Radius ◽

Stop Flow

<div><div><div><p>We report the design of polymersomes using a bottom-up approach where the self-assembly of amphiphilic copolymers poly(2-(methacryloyloxy) ethyl phosphorylcholine)–poly(2-(diisopropylamino) ethyl methacrylate) (PMPC-PDPA) into membranes is tuned using pH and temperature. We study this process in detail using transmission electron microscopy (TEM), nuclear magnetic resonance (NMR) spectroscopy, dynamic light scattering (DLS), and stop-flow ab- sorbance disclosing the molecular and supramolecular anatomy of each structure observed. We report a clear evolution from disk micelles to vesicle to high-genus vesicles where each passage is controlled by pH switch or temperature. We show that the process can be rationalised adapting membrane physics theories disclosing important scaling principles that allow the estimation of the vesiculation minimal radius as well as chain entanglement and coupling. This allows us to propose a new approach to generate nanoscale vesicles with genus from 0 to 70 which have been very elusive and difficult to control so far.</p></div></div></div>

Download Full-text

Bottom-up Evolution from Disks to High-Genus Polymersomes

10.26434/chemrxiv.6108467 ◽

2018 ◽

Author(s):

Claudia Contini ◽

Russell Pearson ◽

Linge Wang ◽

Lea Messager ◽

Jens Gaitzsch ◽

...

Keyword(s):

Self Assembly ◽

The Self ◽

Amphiphilic Copolymers ◽

Chain Entanglement ◽

Bottom Up ◽

New Approach ◽

High Genus ◽

Transmission Electron ◽

Minimal Radius ◽

Stop Flow

<div><div><div><p>We report the design of polymersomes using a bottom-up approach where the self-assembly of amphiphilic copolymers poly(2-(methacryloyloxy) ethyl phosphorylcholine)–poly(2-(diisopropylamino) ethyl methacrylate) (PMPC-PDPA) into membranes is tuned using pH and temperature. We study this process in detail using transmission electron microscopy (TEM), nuclear magnetic resonance (NMR) spectroscopy, dynamic light scattering (DLS), and stop-flow ab- sorbance disclosing the molecular and supramolecular anatomy of each structure observed. We report a clear evolution from disk micelles to vesicle to high-genus vesicles where each passage is controlled by pH switch or temperature. We show that the process can be rationalised adapting membrane physics theories disclosing important scaling principles that allow the estimation of the vesiculation minimal radius as well as chain entanglement and coupling. This allows us to propose a new approach to generate nanoscale vesicles with genus from 0 to 70 which have been very elusive and difficult to control so far.</p></div></div></div>

Download Full-text

Clathrin-Inspired Coating and Stabilization of Liposomes by DNA Self-Assembly

10.26434/chemrxiv.8859017.v1 ◽

2019 ◽

Author(s):

Kevin N. Baumann ◽

Luca Piantanida ◽

Javier García-Nafría ◽

Diana Sobota ◽

Kislon Voïtchovsky ◽

...

Keyword(s):

Self Assembly ◽

Mechanical Stability ◽

Lipid Vesicles ◽

The Self ◽

Force Microscopy ◽

Atomic Force ◽

Cryo Electron Microscopy ◽

Further Development ◽

Liposome Surface ◽

Dna Coating

The self-assembly of the protein clathrin on biological membranes facilitates essential processes of endocytosis in biological systems and has provided a source of inspiration for materials design by the highly ordered structural appearance. By mimicking the architecture of clathrin self-assemblies to coat liposomes with biomaterials, new classes of hybrid carriers can be derived. Here we present a method for fabricating DNA-coated liposomes by hydrophobically anchoring and subsequently growing a DNA network on the liposome surface which structurally mimics clathrin assemblies. Dynamic light scattering (DLS), ζ-potential and cryo-electron microscopy (cryo-EM) measurements independently demonstrate successful DNA coating. Nanomechanical measurements conducted with atomic force microscopy (AFM) show that the DNA coating enhances the mechanical stability of the liposomes relative to uncoated ones. Furthermore, we provide the possibility to reverse the coating process by triggering the disassembly of the DNA coating through a toehold-mediated displacement reaction. Our results describe a straightforward, versatile, and reversible approach for coating and stabilizing lipid vesicles by an interlaced DNA network. This method has potential for further development towards the ordered arrangement of tailored functionalities on the surfaces of liposomes and for applications as hybrid nanocarrier.

Download Full-text