Structure and Mechanisms of Formation of Nanosized Films of Impurity Metal of Cobalt and Nickel in Single Crystals of LiF and MgF2

A new type of synthetic industrial diamond formed by an explosive shock process has been recently developed by the Du Pont Company. This material consists of a mixture of two basically different forms, as shown in Figure 1: relatively flat and compact aggregates of acicular crystallites, and single crystals in the form of irregular polyhedra with straight edges.Figure 2 is a high magnification micrograph typical for the fibrous aggregates; it shows that they are composed of bundles of crystallites 0.05-0.3 μ long and 0.02 μ. wide. The selected area diffraction diagram (insert in Figure 2) consists of a weak polycrystalline ring pattern and a strong texture pattern with arc reflections. The latter results from crystals having preferred orientation, which shows that in a given particle most fibrils have a similar orientation.

Download Full-text

A New Defect in Polyethylene Single Crystals

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100070795 ◽

1973 ◽

Vol 31 ◽

pp. 70-71

Author(s):

E. L. Thomas ◽

S. L. Sass

Keyword(s):

Single Crystals ◽

Screw Dislocation ◽

Small Distance ◽

Dipole Model ◽

Dislocation Dipole ◽

Chain Folding ◽

Black And White ◽

Polymer Crystal ◽

Different Types

In polyethylene single crystals pairs of black and white lines spaced 700-3,000Å apart, parallel to the [100] and [010] directions, have been identified as microsector boundaries. A microsector is formed when the plane of chain folding changes over a small distance within a polymer crystal. In order for the different types of folds to accommodate at the boundary between the 2 fold domains, a staggering along the chain direction and a rotation of the chains in the plane of the boundary occurs. The black-white contrast from a microsector boundary can be explained in terms of these chain rotations. We demonstrate that microsectors can terminate within the crystal and interpret the observed terminal strain contrast in terms of a screw dislocation dipole model.

Download Full-text

Preferential Sputtering of Ni3Al Single Crystals Studied Using Atom-Probe Field-Ion Microscopy and XPS

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100096813 ◽

1981 ◽

Vol 39 ◽

pp. 16-17

Author(s):

M.P. Thomas ◽

A.R. Waugh ◽

M.J. Southon ◽

Brian Ralph

Keyword(s):

Single Crystals ◽

Photoelectron Spectroscopy ◽

Surface Composition ◽

Depth Profiling ◽

Analytical Techniques ◽

Atom Probe ◽

Probe Field ◽

Preferential Sputtering ◽

Argon Ion Bombardment ◽

Argon Ion

It is well known that ion-induced sputtering from numerous multicomponent targets results in marked changes in surface composition (1). Preferential removal of one component results in surface enrichment in the less easily removed species. In this investigation, a time-of-flight atom-probe field-ion microscope A.P. together with X-ray photoelectron spectroscopy XPS have been used to monitor alterations in surface composition of Ni3Al single crystals under argon ion bombardment. The A.P. has been chosen for this investigation because of its ability using field evaporation to depth profile through a sputtered surface without the need for further ion sputtering. Incident ion energy and ion dose have been selected to reflect conditions widely used in surface analytical techniques for cleaning and depth-profiling of samples, typically 3keV and 1018 - 1020 ion m-2.

Download Full-text