The Influence of the Stiffness of the Glass Matrix on the Degree of Reinforcement of Polymer/Organoclay Nanocomposites

The electron irradiation of silicate glasses containing metal cations produces various types of phase separation and decomposition which includes oxygen bubble formation at intermediate temperatures figure I. The kinetics of bubble formation are too rapid to be accounted for by oxygen diffusion but the behavior is consistent with a cation diffusion mechanism if the amount of oxygen in the bubble is not significantly different from that in the same volume of silicate glass. The formation of oxygen bubbles is often accompanied by precipitation of crystalline phases and/or amorphous phase decomposition in the regions between the bubbles and the detection of differences in oxygen concentration between the bubble and matrix by electron energy loss spectroscopy cannot be discerned (figure 2) even when the bubble occupies the majority of the foil depth.The oxygen bubbles are stable, even in the thin foils, months after irradiation and if van der Waals behavior of the interior gas is assumed an oxygen pressure of about 4000 atmospheres must be sustained for a 100 bubble if the surface tension with the glass matrix is to balance against it at intermediate temperatures.

Download Full-text

Microstructural and Microchemical Characterization of Nickel Sulfide Inclusions in Plate Glass

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100089123 ◽

1991 ◽

Vol 49 ◽

pp. 962-963

Author(s):

J. Cooper ◽

O. Popoola ◽

W. M. Kriven

Keyword(s):

Thermal Expansion ◽

Phase Transformation ◽

Glass Matrix ◽

Nickel Sulfide ◽

Plate Glass ◽

Thermal Expansion Mismatch ◽

Volume Increase ◽

Β Phase ◽

Microchemical Characterization

Nickel sulfide inclusions have been implicated in the spontaneous fracture of large windows of tempered plate glass. Two alternative explanations for the fracture-initiating behaviour of these inclusions have been proposed: (1) the volume increase which accompanies the α to β phase transformation in stoichiometric NiS, and (2) the thermal expansion mismatch between the nickel sulfide phases and the glass matrix. The microstructure and microchemistry of the small inclusions (80 to 250 μm spheres), needed to determine the cause of fracture, have not been well characterized hitherto. The aim of this communication is to report a detailed TEM and EDS study of the inclusions.

Download Full-text

Nanostructure of semiconductor quantum dots in a borosilicate glass matrix by complementary use of HREM and AEM

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100176770 ◽

1990 ◽

Vol 48 (4) ◽

pp. 728-729

Author(s):

M.J. Kim ◽

L.C. Liu ◽

S.H. Risbud ◽

R.W. Carpenter

Keyword(s):

Quantum Dots ◽

Borosilicate Glass ◽

Glass Matrix ◽

Optical Switching ◽

Response Times ◽

Fast Response ◽

Processing Technique ◽

Internal Stresses ◽

Electron Hole ◽

Spatial Dimensions

When the size of a semiconductor is reduced by an appropriate materials processing technique to a dimension less than about twice the radius of an exciton in the bulk crystal, the band like structure of the semiconductor gives way to discrete molecular orbital electronic states. Clusters of semiconductors in a size regime lower than 2R {where R is the exciton Bohr radius; e.g. 3 nm for CdS and 7.3 nm for CdTe) are called Quantum Dots (QD) because they confine optically excited electron- hole pairs (excitons) in all three spatial dimensions. Structures based on QD are of great interest because of fast response times and non-linearity in optical switching applications.In this paper we report the first HREM analysis of the size and structure of CdTe and CdS QD formed by precipitation from a modified borosilicate glass matrix. The glass melts were quenched by pouring on brass plates, and then annealed to relieve internal stresses. QD precipitate particles were formed during subsequent "striking" heat treatments above the glass crystallization temperature, which was determined by differential thermal analysis.

Download Full-text

Excitonic quasimolecules containing of two quantum dots

JOURNAL OF ADVANCES IN PHYSICS ◽

10.24297/jap.v11i8.210 ◽

2016 ◽

pp. 4024-4028 ◽

Cited By ~ 1

Author(s):

Sergey I. Pokutnyi ◽

Wlodzimierz Salejda

Keyword(s):

Quantum Dots ◽

Binding Energy ◽

Exchange Interaction ◽

Coulomb Interaction ◽

Silicate Glass ◽

Glass Matrix ◽

Silicate Glass Matrix

The possibility of occurrence of the excitonicÂ quasimolecule formed of spatially separated electrons and holes in a nanosystem that consistsÂ ofÂ CuO quantum dots synthesized in a silicate glass matrix. It is shown that the major contribution to the excitonic quasimolecule binding energy is made by the energy of the exchange interaction of electrons with holes and this contribution is much more substantial than the contribution of the energy of Coulomb interaction between the electrons and holes.

Download Full-text