Siliceous shrubs in hot springs from Yellowstone National Park, Wyoming, U.S.A.

2003 ◽  
Vol 40 (11) ◽  
pp. 1571-1583 ◽  
Author(s):  
Sean A Guidry ◽  
Henry S Chafetz

Many of the siliceous hot springs in Yellowstone National Park contain subaqueous, spinose siliceous precipitates up to 5 cm high that occupy shallow terracettes in siliceous terraced mound accumulations, discharge channels, etc. These siliceous "shrubs" are composed of opal-A with an arborescent or branching pattern and have strong morphological similarities to bacterial shrubs from carbonate-precipitating hot springs. Siliceous shrubs constitute a major precipitate style associated with discharge channel – flow-path facies throughout most of the 20 m of flow path at Cistern Spring, Norris Geyser Basin. They are found in siliceous spring waters ranging in temperature from 76.4 to 16.2 °C and pH from 6.0 to 7.4. At every scale, siliceous shrubs contain abundant evidence of microbial life in the form of bacterial body fossils and extracellular polymeric substances. The presence of relict organic constituents and bacterial morphological fossils indicates that the shrub fabric and architecture are dominated by bacteria, i.e., there is potentially a strong biotic effect on the precipitation process. Precipitation of opal in siliceous shrubs is very likely the result of either active bacterially induced precipitation or passive mediation through organic templates. On a larger scale, siliceous shrubs contain abundant evidence of former microbial activity in hot springs, thus they are good microbial biomarkers.


2021 ◽  
Author(s):  
Eva De Boever ◽  
David Jaramillo‐Vogel ◽  
Anne‐Sophie Bouvier ◽  
Norbert Frank ◽  
Andrea Schröder‐Ritzrau ◽  
...  


2007 ◽  
Vol 73 (20) ◽  
pp. 6669-6677 ◽  
Author(s):  
Eric S. Boyd ◽  
Robert A. Jackson ◽  
Gem Encarnacion ◽  
James A. Zahn ◽  
Trevor Beard ◽  
...  

ABSTRACT Elemental sulfur (S0) is associated with many geochemically diverse hot springs, yet little is known about the phylogeny, physiology, and ecology of the organisms involved in its cycling. Here we report the isolation, characterization, and ecology of two novel, S0-reducing Crenarchaea from an acid geothermal spring referred to as Dragon Spring. Isolate 18U65 grows optimally at 70 to 72°C and at pH 2.5 to 3.0, while isolate 18D70 grows optimally at 81°C and pH 3.0. Both isolates are chemoorganotrophs, dependent on complex peptide-containing carbon sources, S0, and anaerobic conditions for respiration-dependent growth. Glycerol dialkyl glycerol tetraethers (GDGTs) containing four to six cyclopentyl rings were present in the lipid fraction of isolates 18U65 and 18D70. Physiological characterization suggests that the isolates are adapted to the physicochemical conditions of Dragon Spring and can utilize the natural organic matter in the spring as a carbon and energy source. Quantitative PCR analysis of 16S rRNA genes associated with the S0 flocs recovered from several acid geothermal springs using isolate-specific primers indicates that these two populations together represent 17 to 37% of the floc-associated DNA. The physiological characteristics of isolates 18U65 and 18D70 are consistent with their potential widespread distribution and putative role in the cycling of sulfur in acid geothermal springs throughout the Yellowstone National Park geothermal complex. Based on phenotypic and genetic characterization, the designations Caldisphaera draconis sp. nov. and Acidilobus sulfurireducens sp. nov. are proposed for isolates 18U65 and 18D70, respectively.



2003 ◽  
Vol 40 (11) ◽  
pp. 1611-1642 ◽  
Author(s):  
Donald R Lowe ◽  
Deena Braunstein

Slightly alkaline hot springs and geysers in Yellowstone National Park exhibit distinctive assemblages of high-temperature (>73 °C) siliceous sinter reflecting local hydrodynamic conditions. The main depositional zones include subaqueous pool and channel bottoms and intermittently wetted subaerial splash, surge, and overflow areas. Subaqueous deposits include particulate siliceous sediment and dendritic and microbial silica framework. Silica framework forms thin, porous, microbe-rich films coating subaqueous surfaces. Spicules with intervening narrow crevices dominate in splash zones. Surge and overflow deposits include pool and channel rims, columns, and knobs. In thin section, subaerial sinter is composed of (i) dark brown, nearly opaque laminated sinter deposited on surfaces that evaporate to dryness; (ii) clear translucent silica deposited subaqueously through precipitation driven by supersaturation; (iii) heterogeneous silica representing silica-encrusted microbial filaments and detritus; and (iv) sinter debris. Brownish laminations form the framework of most sinter deposited in surge and overflow zones. Pits and cavities are common architectural features of subaerial sinter and show concave-upward pseudo-cross-laminations and micro-unconformities developed through migration. Marked birefringence of silica deposited on surfaces that evaporate to dryness is probably a strain effect. Repeated wetting and evaporation, often to dryness, and capillary effects control the deposition, morphology, and microstructure of most high-temperature sinter outside of the fully subaqueous zone. Microbial filaments are abundant on and within high-temperature sinter but do not provide the main controls on morphology or structuring except in biofilms developed on subaqueous surfaces. Millimetre-scale lamination cyclicity in much high-temperature sinter represents annual layering and regular seasonal fluctuations in silica sedimentation.



1936 ◽  
Vol 222 (1) ◽  
pp. 114-115
Author(s):  
H.W. Elkinton


Astrobiology ◽  
2013 ◽  
Vol 13 (11) ◽  
pp. 1091-1101 ◽  
Author(s):  
Lingling Wu ◽  
Rebecca Poulson Brucker ◽  
Brian L. Beard ◽  
Eric E. Roden ◽  
Clark M. Johnson


Sign in / Sign up

Export Citation Format

Share Document