The vocal repertoire of white whales, Delphinapterus leucas, summering in Cunningham Inlet, Northwest Territories

1986 ◽  
Vol 64 (2) ◽  
pp. 407-415 ◽  
Author(s):  
B. L. Sjare ◽  
T. G. Smith

The underwater vocalizations of white whales, Delphinapterus leucas, summering at Cunningham Inlet, Northwest Territories, were recorded from mid-July to mid-August 1981 to 1983. A total of 807 tonal calls (whistles) were classified into 16 contour types. The following acoustic parameters were measured for each whistle: minimum, maximum, and mean frequency of the fundamental, contour or shape of the fundamental, duration, and the slope of the frequency changes during the call. Some 436 pulsed calls were classified into three major categories: click series, pulsed tones, and noisy vocalizations. Acoustic parameters measured for each of these calls included pulse repetition rate, range and mean frequency of the call, and duration. Results show that the whistle repertoire of white whales is more varied than has been previously reported. Mean frequencies for the whistle contour types ranged from 2.0 to 5.9 kHz; mean duration ranged from 0.25 to 1.95 s. Although whistles were the most commonly emitted type of vocalization, pulsed tones and noisy vocalizations made up a significant proportion of the white whales' vocal repertoire. The mean pulse repetition rate of pulsed tones ranged from 203.9 to 1289.0 pulses/s. There does not appear to be any between-year variation in the vocal repertoire of these white whales.

Nanomaterials ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 1553
Author(s):  
Alexey Rybaltovsky ◽  
Evgeniy Epifanov ◽  
Dmitriy Khmelenin ◽  
Andrey Shubny ◽  
Yuriy Zavorotny ◽  
...  

Two approaches are proposed for the synthesis of bimetallic Au/Ag nanoparticles, using the pulsed laser ablation of a target consisting of gold and silver plates in a medium of supercritical carbon dioxide. The differences between the two approaches related to the field of “green chemistry” are in the use of different geometric configurations and different laser sources when carrying out the experiments. In the first configuration, the Ag and Au targets are placed side-by-side vertically on the side wall of a high-pressure reactor and the ablation of the target plates occurs alternately with a stationary “wide” horizontal beam with a laser pulse repetition rate of 50 Hz. In the second configuration, the targets are placed horizontally at the bottom of a reactor and the ablation of their parts is carried out by scanning from above with a vertical “narrow” laser beam with a pulse repetition rate of 60 kHz. The possibility of obtaining Ag/Au alloy nanoparticles is demonstrated using the first configuration, while the possibility of obtaining “core–shell” bimetallic Au/Ag nanoparticles with a gold core and a silver shell is demonstrated using the second configuration. A simple model is proposed to explain the obtained results.


2000 ◽  
Vol 30 (9) ◽  
pp. 783-786 ◽  
Author(s):  
V M Borisov ◽  
A Yu Vinokhodov ◽  
V A Vodchits ◽  
A V El'tsov ◽  
A S Ivanov

2007 ◽  
Vol 32 (6) ◽  
pp. 716 ◽  
Author(s):  
José Caraquitena ◽  
Zhi Jiang ◽  
Daniel E. Leaird ◽  
Andrew M. Weiner

Sign in / Sign up

Export Citation Format

Share Document