Thermodynamic Description of the Evolution of the Defect–Impurity System of Silicon Crystals

2019 ◽  
pp. 39-88
Keyword(s):  
Thermodynamic Description ◽  
Silicon Crystals ◽  
Impurity System

Dechannealing Study of Nanocrystalline Si:H Layers Produced by High Dose Hydrogen Irradiation of Silicon Crystals

1998 ◽  
Vol 536 ◽  
Author(s):  
V. P. Popov ◽  
A. K. Gutakovsky ◽  
I. V. Antonova ◽  
K. S. Zhuravlev ◽  
E. V. Spesivtsev ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Rutherford Backscattering Spectrometry ◽  
Nanocrystalline Structure ◽  
Structural Defects ◽  
High Dose ◽  
Silicon Crystals ◽  
Strong Energy ◽  
Transmission Electron ◽  
Hydrogen Implantation

AbstractA study of Si:H layers formed by high dose hydrogen implantation (up to 3x107cm-2) using pulsed beams with mean currents up 40 mA/cm2 was carried out in the present work. The Rutherford backscattering spectrometry (RBS), channeling of He ions, and transmission electron microscopy (TEM) were used to study the implanted silicon, and to identify the structural defects (a-Si islands and nanocrystallites). Implantation regimes used in this work lead to creation of the layers, which contain hydrogen concentrations higher than 15 at.% as well as the high defect concentrations. As a result, the nano- and microcavities that are created in the silicon fill with hydrogen. Annealing of this silicon removes the radiation defects and leads to a nanocrystalline structure of implanted layer. A strong energy dependence of dechanneling, connected with formation of quasi nanocrystallites, which have mutual small angle disorientation (<1.50), was found after moderate annealing in the range 200-500°C. The nanocrystalline regions are in the range of 2-4 nm were estimated on the basis of the suggested dechanneling model and transmission electron microscopy (TEM) measurements. Correlation between spectroscopic ellipsometry, visible photoluminescence, and sizes of nanocrystallites in hydrogenated nc-Si:H is observed.

Researching nitrogen solubility in nitrogen-containing austenitic steels at melting and recrystallization by CALPHAD method

2019 ◽  
pp. 53-66 ◽  
Author(s):  
L. A. Smirnov ◽  
I. I. Gorbachev ◽  
V. V. Popov ◽  
A. Yu. Pasynkov ◽  
A. S. Oryshchenko ◽  
...  
Keyword(s):  
Global Minimum ◽  
Nitrogen Solubility ◽  
Thermodynamic Description ◽  
Solidus Temperature ◽  
Liquidus Line ◽  
Calphad Method ◽  
Austenitic Steels ◽  
Nitrogen Transfer ◽  
Fixed Nitrogen ◽  
System Phase

The CALPHAD method has been employed to compose thermodynamic description of the Fe–Cr–Mn–Ni–Si–C–N system. Using an algorithm based on finding a global minimum of Gibbs energy, the calculations of system phase composition were performed in the temperature range from 1750°C to hardening and in the range of compositions corresponding to 04Kh20N6G11M2AFB steel. Calculations showed that at temperatures above liquidus line, Cr and Mn increase nitrogen solubility in the melt, while Ni and Si reduce it. With an increase in the content of Cr, Mn, Ni, and Si in steel in the studied composition range, both liquidus and solidus temperature decrease. The degree of influence on these temperatures of Cr, Mn, Ni and Si within the steel grade is different and ranges from ~3 to ~14°C. Calculations taking into account the possibility of nitrogen transfer between steel and the atmosphere of air showed that the amount of fixed nitrogen in the alloy under study varies, depending on the composition of the steel and temperature, from ~0.3 to ~0.6 wt%. As the temperature decreases from liquidus to solidus, the amount of fixed nitrogen increases, with the exception of those steel compositions when ferrite and not austenite is released from the liquid phase.

scholarly journals Biology and Physics of Heterochromatin-Like Domains/Complexes

Cells ◽  
2020 ◽  
Vol 9 (8) ◽  
pp. 1881
Author(s):  
Prim B. Singh ◽  
Stepan N. Belyakin ◽  
Petr P. Laktionov
Keyword(s):  
Phase Separation ◽  
Fission Yeast ◽  
Thermodynamic Description ◽  
Dynamic Structure ◽  
Vertebrate Development ◽  
Type Region ◽  
Additional Tool ◽  
3D Genome ◽  
Chromatin Template ◽  
Cis And Trans

The hallmarks of constitutive heterochromatin, HP1 and H3K9me2/3, assemble heterochromatin-like domains/complexes outside canonical constitutively heterochromatic territories where they regulate chromatin template-dependent processes. Domains are more than 100 kb in size; complexes less than 100 kb. They are present in the genomes of organisms ranging from fission yeast to human, with an expansion in size and number in mammals. Some of the likely functions of domains/complexes include silencing of the donor mating type region in fission yeast, preservation of DNA methylation at imprinted germline differentially methylated regions (gDMRs) and regulation of the phylotypic progression during vertebrate development. Far cis- and trans-contacts between micro-phase separated domains/complexes in mammalian nuclei contribute to the emergence of epigenetic compartmental domains (ECDs) detected in Hi-C maps. A thermodynamic description of micro-phase separation of heterochromatin-like domains/complexes may require a gestalt shift away from the monomer as the “unit of incompatibility” that determines the sign and magnitude of the Flory–Huggins parameter, χ. Instead, a more dynamic structure, the oligo-nucleosomal “clutch”, consisting of between 2 and 10 nucleosomes is both the long sought-after secondary structure of chromatin and its unit of incompatibility. Based on this assumption we present a simple theoretical framework that enables an estimation of χ for domains/complexes flanked by euchromatin and thereby an indication of their tendency to phase separate. The degree of phase separation is specified by χN, where N is the number of “clutches” in a domain/complex. Our approach could provide an additional tool for understanding the biophysics of the 3D genome.

Sign in / Sign up

Export Citation Format

Share Document