FIRST-PRINCIPLE INVESTIGATION OF ELECTRIC STRUCTURES AND THERMODYNAMIC PROPERTIES FOR ZIRCONIUM NITRIDE UNDER HIGH PRESSURE

2013 ◽  
Vol 27 (14) ◽  
pp. 1350040 ◽  
Author(s):  
CUI-MING TANG ◽  
XIAO-XU CHEN ◽  
JUN WANG ◽  
YAN-FEI HU ◽  
HONG-YAN WANG
Keyword(s):  
Phase Transition ◽  
Thermodynamic Properties ◽  
Elastic Constants ◽  
Density Functional ◽  
Structural Phase ◽  
Debye Model ◽  
Lattice Parameter ◽  
Zirconium Nitride ◽  
Generalized Gradient ◽  
Strain Equation

In the frame of density functional theory, first-principles calculations have been carried out to investigate the structures, elastic constants, structural phase transition between B1 and B2 phases and thermodynamic properties of the zirconium nitride ( ZrN ) by means of the generalized gradient approximation. The equilibrium lattice parameter we obtained for ZrN in B1 phase is closer to the experiment results than previous theoretical results. In addition, the calculations of the elastic constants show that ZrN is a brittle material. What is more, based on third-order natural strain equation of state, the phase transition pressure 338 GPa for ZrN is predicted for B1–B2 transition. According to the quasi-harmonic Debye model, the thermodynamic parameters of ZrN have been investigated systematically.

scholarly journals Ab initio calculations of structural, elastic, electronic and thermodynamic properties of the cerium filled skutterudite CeRu4P12 under the effect of pressure

2015 ◽  
Vol 33 (4) ◽  
pp. 699-708 ◽  
Author(s):  
Mokhtar Berrahal ◽  
Mohammed Ameri ◽  
Y. Al-Douri ◽  
U. Hashim ◽  
Dinesh Varshney ◽  
...  
Keyword(s):  
Thermodynamic Properties ◽  
Bulk Modulus ◽  
Density Functional ◽  
Debye Model ◽  
Lattice Parameter ◽  
Full Potential ◽  
Generalized Gradient ◽  
Filled Skutterudite ◽  
Effect Of Pressure ◽  
Lmto Method

AbstractThe paper presents an investigation on crystalline, elastic and electronic structure in addition to the thermodynamic properties for a CeRu4P12 filled skutterudite device by using the full-potential linear muffin-tin orbital (FP-LMTO) method within the generalized gradient approximations (GGA) in the frame of density functional theory (DFT). For this purpose, the structural properties, such as the equilibrium lattice parameter, bulk modulus and pressure derivatives of the bulk modulus, were computed. By using the total energy variation as a function of strain we have determined the independent elastic constants and their pressure dependence. Additionally, the effect of pressure P and temperature T on the lattice parameters, bulk modulus, thermal expansion coefficient, Debye temperature and the heat capacity for CeRu4P12 compound were investigated taking into consideration the quasi-harmonic Debye model.

Thermodynamic Properties of AlNi Intermetallics under High Pressure

2011 ◽  
Vol 268-270 ◽  
pp. 275-279
Author(s):  
Hai Yan Wang ◽  
Dong Xia Xu ◽  
Jin Bang Yu ◽  
Xu Sheng Li ◽  
Qian Ku Hu
Keyword(s):  
Thermodynamic Properties ◽  
Density Functional ◽  
Linear Thermal Expansion ◽  
Debye Model ◽  
Lattice Parameter ◽  
Relative Volume ◽  
Full Potential ◽  
Generalized Gradient ◽  
Functional Theory ◽  
Calculated Lattice Parameter

The thermodynamic properties of AlNi are investigated by the full-potential linearized muffin-tin orbital (FP-LMTO) scheme within the generalized gradient approximation correction (GGA) in the frame of density functional theory. The calculated lattice parameter and bulk modulus are in excellent agreement with the experimental and other calculated results. Through the quasi-harmonic Debye model, in which the phononic effects are considered, the dependences of relative volumeV/V0on pressureP, cell volumeVon temperatureT, linear thermal expansion α and specific heatCVon temperature and pressure are successfully obtained.

Density functional study of the structural and phase transition of silver halides: LDA versus GGA calculations

2019 ◽  
Vol 08 (02) ◽  
pp. 1950006 ◽  
Author(s):  
H. Rekab Djabri ◽  
R. Yagoub ◽  
S. Bahlouli ◽  
S. Amari ◽  
S. Louhibi Fasla
Keyword(s):  
Phase Transition ◽  
Density Functional ◽  
Local Density ◽  
Structural Phase ◽  
Lattice Parameter ◽  
Functional Study ◽  
Full Potential ◽  
Generalized Gradient ◽  
Pressure Derivative ◽  
Structural And Electronic Properties

This paper deals with the theoretical calculation of structural and electronic, properties of AgBr and AgCl compounds using density functional theory within generalized-gradient (GGA) approximation and local density approximation (LDA). We employ the full potential linear muffin-tin orbitals (FP-LMTO) as implemented in the Lmtart code. We have used to examine structure parameter in eight different structures such as in NaCl (B1), CsCl (B2), ZB (B3), NiAs (B8), PbO (B10), Wurtzite (B4), HCP (A3) [Formula: see text]Sn (A5) structures. The equilibrium lattice parameter, bulk modulus and its pressure derivative were presented for all calculated phases. The calculated ground state properties are in good agreement with available experimental and theoretical results. A pressure induced structural phase transition from NaCl (B1) to HCP (A3) phases at 37.66 and 18.11[Formula: see text]GPa for AgBr and AgCl, respectively, and from NaCl to CsCl phase in AgBr and AgCl at 90.55 and 24.4[Formula: see text]GPa, respectively, is also predicted. Furthermore, the band structures are computed. Our results are compared to other theoretical and experimental works, and excellent agreement is obtained.

Structural, elastic and thermodynamic properties of A15-type compounds V3X (X = Ir, Pt and Au) from first-principles calculations

2016 ◽  
Vol 30 (35) ◽  
pp. 1650414 ◽  
Author(s):  
Mingliang Wang ◽  
Zhe Chen ◽  
Dong Chen ◽  
Cunjuan Xia ◽  
Yi Wu
Keyword(s):  
Thermodynamic Properties ◽  
Debye Temperature ◽  
First Principles ◽  
Density Functional ◽  
Coefficient Of Thermal Expansion ◽  
Local Density ◽  
Debye Model ◽  
First Principles Calculations ◽  
Generalized Gradient ◽  
Experimental Values

The structural, elastic and thermodynamic properties of the A15 structure V3Ir, V3Pt and V3Au were studied using first-principles calculations based on the density functional theory (DFT) within generalized gradient approximation (GGA) and local density approximation (LDA) methods. The results have shown that both GGA and LDA methods can process the structural optimization in good agreement with the available experimental parameters in the compounds. Furthermore, the elastic properties and Debye temperatures estimated by LDA method are typically larger than the GGA methods. However, the GGA methods can make better prediction with the experimental values of Debye temperature in V3Ir, V3Pt and V3Au, signifying the precision of the calculating work. Based on the E–V data derived from the GGA method, the variations of the Debye temperature, coefficient of thermal expansion and heat capacity under pressure ranging from 0 GPa to 50 GPa and at temperature ranging from 0 K to 1500 K were obtained and analyzed for all compounds using the quasi-harmonic Debye model.

Structural, phase transition, mechanical and thermodynamic properties of TMNs under external pressures: A first-principles study

2018 ◽  
Vol 32 (15) ◽  
pp. 1850181 ◽  
Author(s):  
Xin Tan ◽  
Yinan Dong ◽  
Yuan Ren ◽  
Xuan Li ◽  
Hui Qi ◽  
...  
Keyword(s):  
Phase Transition ◽  
Elastic Constants ◽  
Density Functional ◽  
Mechanical Stability ◽  
Structural Phase ◽  
Potential Method ◽  
External Pressure ◽  
Nanocomposite Films ◽  
External Pressures ◽  
Energy Relations

The plane-wave pseudo-potential method, which is based on density functional theory, is used to determine the structure, elastic constants and phase transition properties of transition metal nitride (TMN; TM = Ti, Zr, Hf, V, Nb and Ta) nanocomposite films under external pressures. Enthalpy–pressure and volume–energy relations of TMNs with different structures are calculated, and their relative stability is discussed. Mechanical stability of external pressure is calculated, and changes in elastic constants with external pressure are analyzed. The present study obtains influence of external pressure on the mechanical properties of material. By analyzing total energy–volume relation, enthalpy–pressure relation and mechanical stability, phase transition law of TMNs under external pressure is obtained.

First-principles study of the structure, elastic constants, electronic and thermodynamic properties of C15 laves phase ZrMo2

2020 ◽  
Vol 34 (18) ◽  
pp. 2050170
Author(s):  
Xianbo Liu ◽  
Jun Zhu
Keyword(s):  
Thermodynamic Properties ◽  
Elastic Constants ◽  
Density Functional ◽  
Debye Model ◽  
State Density ◽  
Electronic Density ◽  
Plane Wave Method ◽  
Electron State Density ◽  
Phonon Spectra ◽  
Theoretical Simulations

The structure, elastic constants and electron state density of ZrMo2 in [Formula: see text]15 phase are investigated by pseudopotential plane-wave method based on density functional theory (DFT). The thermodynamic properties are studied with the quasi-harmonic Debye model. The calculated results are in good agreement with the previous experimental results and theoretical simulations. The calculated phonon spectra and elastic constants show that [Formula: see text]15 phase of ZrMo2 is mechanically stable. Through the analysis of [Formula: see text]/[Formula: see text] value and Poisson’s ratio, [Formula: see text]15 phase of ZrMo2 shows ductility at 0–150 GPa, and it increases with the increment of pressure. We further explore the mechanism of the metallic properties by analyzing the electronic density of states. In addition, Debye temperature, thermal expansion coefficient and heat capacity as a function of pressure and temperature is discussed, respectively.

Investigation of the structural, electronic, elastic and thermodynamic properties of Curium Monopnictides: An ab initio study

2017 ◽  
Vol 31 (30) ◽  
pp. 1750226 ◽  
Author(s):  
H. Baaziz ◽  
Dj. Guendouz ◽  
Z. Charifi ◽  
S. Akbudak ◽  
G. Uğur ◽  
...  
Keyword(s):  
Thermodynamic Properties ◽  
Bulk Modulus ◽  
Density Functional ◽  
Local Density ◽  
Structural Parameters ◽  
Structural Phase ◽  
Full Potential ◽  
Generalized Gradient ◽  
Metallic Behavior ◽  
Spin Polarized

The structural, electronic, elastic and thermodynamic properties of Curium Monopnictides CmX (X = N, P, As, Sb and Bi) are investigated using first-principles calculations based on the density functional theory (DFT) and full potential linearized augmented plane wave (FP-LAPW) method under ambient condition and high pressure. The exchange-correlation term is treated using two approximations spin-polarized local density approximation (LSDA) and spin-polarized generalized gradient approximation generalized (GGA). The structural parameters such as the equilibrium lattice parameters, bulk modulus and the total energies are calculated in two phases: namely NaCl (B1) and CsCl (B2). The obtained results are compared with the previous theoretical and experimental results. A structural phase transition from B1 phase to B2 phase for Curium pnictides has been obtained. The highest transition pressure is 122 GPa for CmN and the lowest one is 10.0 GPa for CmBi compound. The electronic properties show that these materials exhibit half-metallic behavior in both phases. The magnetic moment is found to be around 7.0 [Formula: see text]B. The mechanical properties of CmX (X = N, P, As, Sb and Bi) are predicted from the calculated elastic constants. Our calculated results are in good agreement with the theoretical results in literature. The effect of pressure and temperature on the thermodynamic properties like the cell volume, bulk modulus and the specific heats C[Formula: see text] and C[Formula: see text], the entropy [Formula: see text] and the Grüneisen parameter [Formula: see text] have been foreseen at expanded pressure and temperature ranges.

Electronic structure, optical and thermodynamic properties of ternary hydrides MBeH3 (M = Li, Na, and K)

2016 ◽  
Vol 94 (9) ◽  
pp. 865-876 ◽  
Author(s):  
Dj Guendouz ◽  
Z. Charifi ◽  
H. Baaziz ◽  
T. Ghellab ◽  
N. Arikan ◽  
...  
Keyword(s):  
Electronic Structure ◽  
Thermodynamic Properties ◽  
Density Functional ◽  
Electronic Band Structure ◽  
Local Density ◽  
Debye Model ◽  
Generalized Gradient ◽  
Electronic Band ◽  
Electron Charge Density ◽  
Principal Aspect

Electronic band structure, optical and thermodynamic properties of ternary hydrides MBeH3 (M = Li, Na, and K) were studied using ab initio density functional theory (DFT). The effect of the adopted approximation to the exchange-correlation functional of the DFT is explicitly investigated by considering four different expressions of two different classes (local-density approximation and generalized-gradient approximation). The calculated magnitude of B classifies MBeH3 (M = Li, Na, and K) as easily compressible materials. The bonding interaction in these compounds is quite complicated. The interaction between M and BeH6 is ionic and that between Be and H comprises both ionic and covalent characters. The electronic structure of the complex hydride was investigated by calculating the partial and total densities of states, and electron charge density distribution. Large gaps in the density of states appear at the Fermi energy of LiBeH3, NaBeH3, and KBeH3 indicating that these classes of hydrides are insulators. Optical properties, including the dielectric function, reflectivity, and absorption coefficient, each as a function of photon energy, are calculated and show an optical anisotropy for LiBeH3 and KBeH3. Through the quasi-harmonic Debye model, in which the phononic effects are considered, temperature dependence of volume V(T), bulk modulus B(T), and thermal expansion coefficient α(T), constant-volume and constant-pressure specific heat (Cv and Cp) and Debye temperature ΘD, the entropy S, and the Grüneisen parameter γ were calculated at wide pressure and temperature ranges. The principal aspect of the obtained results is the close similarity of MBeH3 (M = Li, Na, and K) compounds.

PHASE TRANSITION, ELASTIC AND THERMODYNAMIC PROPERTIES OF BERYLLIUM VIA FIRST PRINCIPLES

2013 ◽  
Vol 27 (24) ◽  
pp. 1350130 ◽  
Author(s):  
YAN CHENG ◽  
HAI-HUA CHEN ◽  
FAN-XIANG XUE ◽  
GUANG-FU JI ◽  
MIN GONG
Keyword(s):  
Phase Transition ◽  
Thermodynamic Properties ◽  
First Principles ◽  
Density Functional ◽  
High Pressures ◽  
Intermediate Phase ◽  
Linear Thermal Expansion ◽  
Generalized Gradient ◽  
Functional Theory ◽  
Bcc Phase

The phase transition, elastic and thermodynamic properties of beryllium (Be) have been studied at high pressures by plane-wave ultrasoft pseudopotential density functional theory (DFT) within the generalized gradient approximation (GGA). It is found that the hcp → bcc phase transition of Be occurs at 506 GPa (T = 0 K ) and occurs at 1200 K (P = 0 GPa ). The coefficients of linear thermal expansion of the hexagmal close-packed (hcp), bcc and orthorhombic Be have been calculated. The hcp → orthorhombic → bcc phase transitions do not occur in all range of pressures, that is to say, the orthorhombic Be is not an intermediate phase between the hcp and bcc Be. The obtained bulk modulus (B0) are 113.2 GPa (for hcp Be), 113.1 GPa (for bcc Be) and 70.5 GPa (for orthorhombic Be), respectively.

The structures, phase transition and elastic and thermodynamic properties of ZnS from first-principles calculations

2021 ◽  
pp. 2150143
Author(s):  
Bo Li ◽  
Weiyi Ren
Keyword(s):  
Phase Transition ◽  
Thermodynamic Properties ◽  
Bulk Modulus ◽  
First Principles ◽  
Density Functional ◽  
Mechanical Stability ◽  
Theoretical Data ◽  
Debye Model ◽  
Volume Curve ◽  
Temperature And Pressure

The phase transition of zinc sulfide (ZnS) from Zinc-blende (ZB) to a rocksalt (RS) structure and the elastic, thermodynamic properties of the two structures under high temperature and pressure are investigated by first-principles study based on the pseudo-potential plane-wave density functional theory (DFT) combined with the quasi-harmonic Debye model. The lattice constant [Formula: see text], bulk modulus [Formula: see text] and the pressure derivative of bulk modulus [Formula: see text]’ of the two structures are calculated. The results are in good agreement with experimental results and the other theoretical data. From the energy–volume curve, enthalpy equal principle and mechanical stability criterion, the transition pressures from the ZB to the RS structure are 16.83, 16.96 and 16.61 GPa, respectively. The three results and the experimental values 14.7–18.1, 16 GPa are very close to each other. Then the elastic properties are also calculated under the pressure ranging from 0 to 30 GPa. Finally, through the quasi-harmonic Debye model, the thermodynamic properties dependence of temperature and pressure in the ranges between 0–1600 K and 0–30 GPa are obtained successfully.

Sign in / Sign up

Export Citation Format

Share Document