INFLUENCE OF THE CONSTITUTIVE MATERIAL BEHAVIOR MODEL ASSIGNED TO THE ANNULUS FIBROSUS AND THE NUCLEUS PULPOSUS ON THE BIOMECHANICAL PERFORMANCE OF A MODEL OF THE CERVICAL SPINE: A FINITE ELEMENT ANALYSIS STUDY

2010 ◽  
Vol 10 (01) ◽  
pp. 151-166 ◽  
Author(s):  
YUAN LI ◽  
GLADIUS LEWIS
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Cervical Spine ◽  
Annulus Fibrosus ◽  
Constitutive Models ◽  
Material Behavior ◽  
Elastic Behavior ◽  
Behavior Model ◽  
Element Analysis ◽  
Constitutive Material

One feature of the literature on finite element analysis of models of cervical spine segment(s) is that an assortment of constitutive models has been used for the elastic behavior of the annulus fibrosus (AF) and the nucleus pulposus (NF). The extent to which the model assigned to each of these tissues affects the values of the biomechanical parameters of interest of the model is lacking. This issue was the subject of the present study. We used a three-dimensional solid model of the C4–C6 motion segment units (which comprised the vertebral bodies, the bony posterior elements (transverse processes, pedicles, laminae, spinous processes, and facet joints), the intervertebral discs (IVDs), the endplates, and the five major ligaments) and eight combinations of constitutive models. It was found that (1) the influence of the constitutive material models used depended on the tissue considered, with some, such as the posterior endplate of C5 and the cancellous bone of C6, showing marked sensitivity, while others, such as the cancellous bone of C4 and the cortical bone of C5, were moderately affected; and (2) the biomechanical performance of the spine model is more sensitive to the material behavior model used for the AF than it is to that used for the NF. These results suggest that experimental and computational efforts expended in obtaining the most appropriate constitutive model for the elastic behavior of the two parts of the IVD, in particular the AF, are justified.

scholarly journals 3D Finite Element Analysis of Rotary Instruments in Root Canal Dentine with Different Elastic Moduli

2021 ◽  
Vol 11 (6) ◽  
pp. 2547 ◽  
Author(s):  
Carlo Prati ◽  
João Paulo Mendes Tribst ◽  
Amanda Maria de Oliveira Dal Piva ◽  
Alexandre Luiz Souto Borges ◽  
Maurizio Ventre ◽  
...  
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Root Canal ◽  
Elastic Moduli ◽  
Reaction Force ◽  
Von Mises Stress ◽  
Elastic Behavior ◽  
Element Analysis ◽  
Heat Treated ◽  
Von Mises

The aim of the present investigation was to calculate the stress distribution generated in the root dentine canal during mechanical rotation of five different NiTi endodontic instruments by means of a finite element analysis (FEA). Two conventional alloy NiTi instruments F360 25/04 and F6 Skytaper 25/06, in comparison to three heat treated alloys NiTI Hyflex CM 25/04, Protaper Next 25/06 and One Curve 25/06 were considered and analyzed. The instruments’ flexibility (reaction force) and geometrical features (cross section, conicity) were previously investigated. For each instrument, dentine root canals with two different elastic moduli(18 and 42 GPa) were simulated with defined apical ratios. Ten different CAD instrument models were created and their mechanical behaviors were analyzed by a 3D-FEA. Static structural analyses were performed with a non-failure condition, since a linear elastic behavior was assumed for all components. All the instruments generated a stress area concentration in correspondence to the root canal curvature at approx. 7 mm from the apex. The maximum values were found when instruments were analyzed in the highest elastic modulus dentine canal. Strain and von Mises stress patterns showed a higher concentration in the first part of curved radius of all the instruments. Conventional Ni-Ti endodontic instruments demonstrated higher stress magnitudes, regardless of the conicity of 4% and 6%, and they showed the highest von Mises stress values in sound, as well as in mineralized dentine canals. Heat-treated endodontic instruments with higher flexibility values showed a reduced stress concentration map. Hyflex CM 25/04 displayed the lowest von Mises stress values of, respectively, 35.73 and 44.30 GPa for sound and mineralized dentine. The mechanical behavior of all rotary endodontic instruments was influenced by the different elastic moduli and by the dentine canal rigidity.

Analytical and Numerical Predictions of Thermoelastic Properties of Carbon Single-Walled Nanotubes

Aerospace ◽  
2005 ◽  
Author(s):  
Vinod P. Veedu ◽  
Davood Askari ◽  
Mehrdad N. Ghasemi-Nejhad
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Graphene Sheet ◽  
Effective Properties ◽  
Constitutive Models ◽  
Thermoelastic Properties ◽  
Asymptotic Homogenization ◽  
Element Analysis ◽  
Single Walled Nanotubes ◽  
Numerical Predictions

The objective of this paper is to develop constitutive models to predict thermoelastic properties of carbon single-walled nanotubes using analytical, asymptotic homogenization, and numerical, finite element analysis, methods. In our approach, the graphene sheet is considered as a non-homogeneous network shell layer which has zero material properties in the regions of perforation and whose effective properties are estimated from the solution of the appropriate local problems set on the unit cell of the layer. Our goal is to derive working formulas for the entire complex of the thermoelastic properties of the periodic network. The effective thermoelastic properties of carbon nanotubes were predicted using asymptotic homogenization method. Moreover, in order to verify the results of analytical predictions, a detailed finite element analysis is followed to investigate the thermoelastic response of the unit cells and the entire graphene sheet network.

Finite Element Analysis of Hyperelastic Components

1998 ◽  
Vol 51 (5) ◽  
pp. 303-320 ◽  
Author(s):  
D. W. Nicholson ◽  
N. W. Nelson ◽  
B. Lin ◽  
A. Farinella
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Recent Literature ◽  
Constitutive Models ◽  
Review Article ◽  
Considerable Extent ◽  
Arc Length ◽  
Numerical Techniques ◽  
Element Analysis ◽  
Current Review

Finite element analysis of hyperelastic components poses severe obstacles owing to features such as large deformation and near-incompressibility. In recent years, outstanding issues have, to a considerable extent, been addressed in the form of the hyperelastic element available in commercial finite element codes. The current review article, which updates and expands a 1990 article in Rubber Reviews, is intended to serve as a brief exposition and selective survey of the recent literature. Published simulations are listed. Rubber constitutive models and the measurement of their parameters are addressed. The underlying incremental variational formulation is sketched for thermomechanical response of compressible, incompressible and near-incompressible elastomers. Coupled thermomechanical effects and broad classes of boundary conditions, such as variable contact, are encompassed. Attention is given to advanced numerical techniques such as arc length methods. Remaining needs are assessed. This review article contains 142 references.

Creep Life Simulation and Assessment of High Temperature Piping Systems and Components

2012 ◽  
Author(s):  
Brian Rose ◽  
James Widrig
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
High Temperature ◽  
Creep Behavior ◽  
Material Behavior ◽  
Piping System ◽  
Remaining Life ◽  
Creep Life ◽  
Element Analysis ◽  
Piping Systems

High temperature piping systems and associated components, elbows and bellows in particular, are vulnerable to damage from creep. The creep behavior of the system is simulated using finite element analysis (FEA). Material behavior and damage is characterized using the MPC Omega law, which captures creep embrittlement. Elbow elements provide rapid yet accurate modeling of pinching of piping, which consumes a major portion of the creep life. The simulation is used to estimate the remaining life of the piping system, evaluate the adequacy of existing bellows and spring can supports and explore remediation options.

Biomechanics of a posture-controlling cervical artificial disc: mechanical, in vitro, and finite-element analysis

2010 ◽  
Vol 28 (6) ◽  
pp. E11 ◽  
Author(s):  
Neil R. Crawford ◽  
Jeffery D. Arnett ◽  
Joshua A. Butters ◽  
Lisa A. Ferrara ◽  
Nikhil Kulkarni ◽  
...  
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Cervical Spine ◽  
Postural Control ◽  
Range Of Motion ◽  
Computer Modeling ◽  
Mechanical Testing ◽  
Artificial Disc ◽  
Element Analysis

Different methods have been described by numerous investigators for experimentally assessing the kinematics of cervical artificial discs. However, in addition to understanding how artificial discs affect range of motion, it is also clinically relevant to understand how artificial discs affect segmental posture. The purpose of this paper is to describe novel considerations and methods for experimentally assessing cervical spine postural control in the laboratory. These methods, which include mechanical testing, cadaveric testing, and computer modeling studies, are applied in comparing postural biomechanics of a novel postural control arthroplasty (PCA) device versus standard ball-and-socket (BS) and ball-in-trough (BT) arthroplasty devices. The overall body of evidence from this group of tests supports the conclusion that the PCA device does control posture to a particular lordotic position, whereas BS and BT devices move freely through their ranges of motion.

Sign in / Sign up

Export Citation Format

Share Document