scholarly journals 3D Finite Element Analysis of Rotary Instruments in Root Canal Dentine with Different Elastic Moduli

2021 ◽  
Vol 11 (6) ◽  
pp. 2547 ◽  
Author(s):  
Carlo Prati ◽  
João Paulo Mendes Tribst ◽  
Amanda Maria de Oliveira Dal Piva ◽  
Alexandre Luiz Souto Borges ◽  
Maurizio Ventre ◽  
...  
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Root Canal ◽  
Elastic Moduli ◽  
Reaction Force ◽  
Von Mises Stress ◽  
Elastic Behavior ◽  
Element Analysis ◽  
Heat Treated ◽  
Von Mises

The aim of the present investigation was to calculate the stress distribution generated in the root dentine canal during mechanical rotation of five different NiTi endodontic instruments by means of a finite element analysis (FEA). Two conventional alloy NiTi instruments F360 25/04 and F6 Skytaper 25/06, in comparison to three heat treated alloys NiTI Hyflex CM 25/04, Protaper Next 25/06 and One Curve 25/06 were considered and analyzed. The instruments’ flexibility (reaction force) and geometrical features (cross section, conicity) were previously investigated. For each instrument, dentine root canals with two different elastic moduli(18 and 42 GPa) were simulated with defined apical ratios. Ten different CAD instrument models were created and their mechanical behaviors were analyzed by a 3D-FEA. Static structural analyses were performed with a non-failure condition, since a linear elastic behavior was assumed for all components. All the instruments generated a stress area concentration in correspondence to the root canal curvature at approx. 7 mm from the apex. The maximum values were found when instruments were analyzed in the highest elastic modulus dentine canal. Strain and von Mises stress patterns showed a higher concentration in the first part of curved radius of all the instruments. Conventional Ni-Ti endodontic instruments demonstrated higher stress magnitudes, regardless of the conicity of 4% and 6%, and they showed the highest von Mises stress values in sound, as well as in mineralized dentine canals. Heat-treated endodontic instruments with higher flexibility values showed a reduced stress concentration map. Hyflex CM 25/04 displayed the lowest von Mises stress values of, respectively, 35.73 and 44.30 GPa for sound and mineralized dentine. The mechanical behavior of all rotary endodontic instruments was influenced by the different elastic moduli and by the dentine canal rigidity.

Investigating the Calibration Curves for a Two Component Cutting Tool Lathe Dynamometer Using Finite Element Analysis

2016 ◽  
Vol 24 ◽  
pp. 71-84
Author(s):  
Osezua Obehi Ibhadode ◽  
Ishaya Musa Dagwa ◽  
Akii Okonigbon Akhaehomen Ibhadode
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Cutting Tool ◽  
Von Mises Stress ◽  
Equation Modeling ◽  
Element Analysis ◽  
Calibration Curves ◽  
Two Component ◽  
Applied Forces ◽  
Von Mises

Calibration curves of a multi-component dynamometer is of essence in machining operations in a lathe machine as they serve to provide values of force and stress components for cutting tool development and optimization. In this study, finite element analysis has been used to obtain the deflection and stress response of a two component cutting tool lathe dynamometer, for turning operation, when the cutting tool is subjected to cutting and thrust forces from 98.1N to 686.7N (10 to 70kg-wts), at intervals of 98.1N(10kg-wt). By obtaining the governing equation, modeling the dynamometer assembly, defining boundary conditions, generating the assembly mesh, and simulating in Inventor Professional; horizontal and vertical components of deflection by the dynamometer were read off for three different loading scenarios. For these three loading scenarios, calibration plots by experiment compared with plots obtained from simulation by finite element analysis gave accuracies of 79%, 95%, 84% and 36%, 57%, 63% for vertical and horizontal deflections respectively. Also, plots of horizontal and vertical components of Von Mises stress against applied forces were obtained.

scholarly journals Simulasi Kekuatan Mekanik Sudu Turbin Angin Horizontal Menggunakan Software Simscale

2021 ◽  
Vol 4 (2) ◽  
Author(s):  
Mubni Nazar ◽  
Anggito Pringgo Tetuko ◽  
Djuhana Djuhana
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Von Mises Stress ◽  
Element Analysis ◽  
Von Mises

Penelitian ini dilakukan untuk meningkatkan koefisien daya yang maksimal. Salah satunya dengan mengunakan kualitas sudu yang baik. Untuk mengoptimalkan fungsi turbin angin penulis menggunakan material sudu pada turbin angin dengan menggunakan Acrylonitrine Butadine Styrene (ABS). Oleh karena itu pada penelitian ini metode yang digunakan adalah metode Finite Element Analysis Simulasi yang dipilih adalah dynamic. Penelitian ini adalah pengujian kekuatan sudu turbin angin horizontal dengan variasi kecepatan angin 10 – 20 m/s ditinjau dari von mises stress dan displacement. Dari hasil simulasi kecepatan angin memiiki pengaruh terhadap distribusi stress dan displacement. Material yang digunakan masih berada di bawah batas kekuatan material, semakin besar gaya yang diberikan semakin besar nilai stress dan displacement. Pada hasil simulasi didapatkan nilai stress minimum 5.8 Pa stress maksimum 22.94 Sedangkan dalam pengujian displacement dihasilkan nilai minimum 1.27 m displacement maksimum 4.99 m.

Investigation on stress distribution and pressure capacity of two-layer split high-pressure die based on finite element analysis

2019 ◽  
Vol 233 (14) ◽  
pp. 5048-5055
Author(s):  
Z Yi ◽  
WZ Fu ◽  
MZ Li
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
High Pressure ◽  
Stress State ◽  
Von Mises Stress ◽  
Stress Distributions ◽  
Element Analysis ◽  
Round Cylinder ◽  
Von Mises ◽  
Supporting Ring

In order to obtain a higher pressure capacity for the high-pressure die with a larger sample cavity, two types of two-layer split dies with a round cylinder and a quadrate cylinder were designed based on the conventional belt-type die. Finite element analysis was performed to investigate the stress distributions and pressure capacities of the high-pressure dies using a derived Mohr–Coulomb criterion and the von Mises criterion for the cylinder and supporting rings, respectively. As predicted by the finite element analysis results, in the two-layer split dies with a round cylinder, the stress state of the cylinder can be only slightly improved; and the von Mises stress of the first layer supporting ring can be hardly decreased. However, in the two-layer split dies with a quadrate cylinder and sample cavity, the stress state of the cylinder can be remarkably improved. Simultaneously, the von Mises stress of the supporting rings, especially for the first-layer supporting ring, can be also effectively decreased. The pressure capacities of the two-layer split dies with a round cylinder and a quadrate cylinder are 16.5% and 63.9% higher with respect to the conventional belt-type die.

Finite element analysis (FEA) of polylactic acid/polypropylene carbonate (PLA/PPC) blends fixation plate for craniomaxillofacial surgery

2019 ◽  
Vol 10 (5) ◽  
pp. 678-691
Author(s):  
Intan Najwa Humaira Mohamed Haneef ◽  
Norhashimah Shaffiar ◽  
Yose Fachmi Buys ◽  
Abdul Malek Abd. Hamid
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Human Body ◽  
Healing Process ◽  
Von Mises Stress ◽  
Element Analysis ◽  
Content Type ◽  
New Material ◽  
Fixation Plate ◽  
Von Mises

Purpose The internal fixation plate of bone fractures by using polylactic acid (PLA) has attracted the attention of many researchers, as it is biodegradable and biocompatible to the human body. However, its brittleness has led to implant fracture. On the contrary, polypropylene carbonate (PPC), which is also biodegradable and biocompatible, has an excellent elongation at break. The purpose of this paper is to compare the PLA fixation plate with the new fixation plate made up of PLA/PPC blends by using finite element analysis (FEA). Design/methodology/approach The mandible bone from CT data set and fixation plate was designed by using the MIMICS, Amira and Solidworks softwares. Abaqus software was used for FEA of PLA/PPC fixation plate applied on the fractured mandible bone. A model of mandibular bone with a fracture in the body was subjected to incisor load. The analysis was run to determine the von Mises stress, elongation of the fixation plate and the displacement of the fractured gap of PLA/PPC blends fixation plate. Findings The von Mises stress predicted that all the blend compositions were safe to be used as a fixation plate since the stress values were less than the yield strength. In addition, the stress value of the fixation plate was gradually decreased up to 20 percent when the amount of PPC increased to 30 percent. This indicates that the stress shielding effect was successfully reduced. The elongation of the fixation plate was gradually increased from 11.54 to 12.55 µm as the amount of PPC in the blends increased from 0 to 30 percent, thereby illustrating that the flexibility of the fixation plate was improved by the addition of PPC. Finally, the measured displacement of the fractured gap for all compositions of PLA/PPC blends fixation plate is less than 150 µm, which proves the likely success of fracture fixation by using the PLA/PPC blends. Research limitations/implications An optimum solution of PLA/PPC blends and another new material such as compatibilizer need to be introduced in the blends in order to improve the performance of PLA/PPC blends as a new material for a fixation plate. Besides, by using the same method of producing PLA/PPC blends, longer durations for in vitro degradation of PLA/PPC blends are essential to further understand the degradation behavior of the blends applied in the human body. Finally, it is also important to further test the mechanical strength of PLA/PPC blends during the degradation period to know the current strength of the implant in the healing process of the bone. Practical implications PLA fixation plate and screw can commercially be used in CMF surgery since they reduce cost because of the elimination of secondary surgery to remove the fixation plate and screw after the healing process. Social implications It is hoped that the advantages of this research will ensure the market of PLA product to continue expanding in medical application. Originality/value This study is one of the alternative ways for the biomedical researchers to improve the elongation break of PLA. Currently, many researchers focus on polymeric materials such as PLA, poly(glycolic) acid and polydioxanone blends, which were extensively being used in CMF surgery. However, the work on PLA/PPC blends to be used as one of the materials for the CMF fixation plate is very limited, if any. PPC, the proposed material for this research, will improve the mechanical performance of PLA fixation plate and screw to become more sustainable and flexible when applied on human mandible bone.

The function(s) of bone ornamentation in the crocodylomorph osteoderms: a biomechanical model based on a finite element analysis

Paleobiology ◽  
2019 ◽  
Vol 45 (1) ◽  
pp. 182-200 ◽  
Author(s):  
François Clarac ◽  
Florent Goussard ◽  
Vivian de Buffrénil ◽  
Vittorio Sansalone
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Stress Distribution ◽  
Von Mises Stress ◽  
Late Triassic ◽  
Mechanical Resistance ◽  
Apical Surface ◽  
Element Analysis ◽  
Physiological Functions ◽  
Von Mises

AbstractThis paper aims at assessing the influence of the bone ornamentation and, specifically, the associated loss of bone mass on the mechanical response of the crocodylomorph osteoderms. To this end, we have performed three-dimensional (3D) modeling and a finite element analysis on a sample that includes both extant dry bones and well-preserved fossils tracing back to the Late Triassic. We simulated an external attack under various angles on the apical surface of each osteoderm and further repeated the simulation on an equivalent set of smoothed 3D-modeled osteoderms. The comparative results indicated that the presence of an apical sculpture has no significant influence on the von Mises stress distribution in the osteoderm volume, although it produces a slight increase in its numerical score. Moreover, performing parametric analyses, we showed that the Young's modulus of the osteoderm, which may vary depending on the bone porosity, the collagen fiber orientation, or the calcification density, has no impact on the von Mises stress distribution inside the osteoderm volume. As the crocodylomorph bone ornamentation is continuously remodeled by pit resorption and secondary bone deposition, we assume that the apical sculpture may be the outcome of a trade-off between the bone mechanical resistance and the involvement in physiological functions. These physiological functions are indeed based on the setup of a bone superficial vessel network and/or the recurrent release of mineral elements into the plasma: heat transfers during basking and respiratory acidosis buffering during prolonged apnea in neosuchians and teleosaurids; compensatory homeostasis in response to general calcium deficiencies. On a general morphological basis, the osteoderm geometric variability within our sample leads us to assess that the global osteoderm geometry (whether square or rectangular) does not influence the von Mises stress, whereas the presence of a dorsal keel would somewhat reduce the stress along the vertical axis.

A comparative study between zirconia and titanium abutments on the stress distribution in parafunctional loading: A 3D finite element analysis

2020 ◽  
Vol 28 (6) ◽  
pp. 603-613 ◽  
Author(s):  
Efe Can Sivrikaya ◽  
Mehmet Sami Guler ◽  
Muhammed Latif Bekci
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Three Dimensional ◽  
Von Mises Stress ◽  
Principal Stresses ◽  
Element Analysis ◽  
Dimensional Finite Element ◽  
3D Fea ◽  
Von Mises ◽  
Three Dimensional Finite Element

BACKGROUND: Zirconia has become a popular biomaterial in dental implant systems because of its biocompatible and aesthetic properties. However, this material is more fragile than titanium so its use is limited. OBJECTIVES: The aim of this study was to compare the stresses on morse taper implant systems under parafunctional loading in different abutment materials using three-dimensional finite element analysis (3D FEA). METHODS: Four different variations were modelled. The models were created according to abutment materials (zirconia or titanium) and loading (1000 MPa vertical or oblique on abutments). The placement of the implants (diameter, 5.0 × 15 mm) were mandibular right first molar. RESULTS: In zirconia abutment models, von Mises stress (VMS) values of implants and abutments were decreased. Maximum and minimum principal stresses and VMS values increased in oblique loading. VMS values were highest in the connection level of the conical abutments in all models. CONCLUSIONS: Using conical zirconia abutments decreases von Mises stress values in abutments and implants. However, these values may exceed the pathological limits in bruxism patients. Therefore, microfractures may be related to the level of the abutment.

FINITE ELEMENT ANALYSIS OF A MODEL OF SIMULATED VERTEBRAL CEMENT AUGMENTATION: INFLUENCE OF THE REPRESENTATION OF THE SHAPE OF THE CEMENT DOMAIN ON BIOMECHANICAL PARAMETERS

2010 ◽  
Vol 10 (02) ◽  
pp. 291-311 ◽  
Author(s):  
YUAN LI ◽  
GLADIUS LEWIS
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Shape Representation ◽  
Oblate Spheroid ◽  
Cement Augmentation ◽  
Von Mises Stress ◽  
Element Analysis ◽  
Domain Shape ◽  
Biomechanical Parameters ◽  
Von Mises

Vertebral cement augmentation is rapidly becoming the modality of choice for treating patients who are experiencing severe and persistent pain because of osteoporosis-induced vertebral compression fracture(s). The resulting cement domain (the part of the vertebral body (VB) filled with the cement) has an irregular or complicated shape. In literature reports of finite element analysis (FEA) of models of simulated vertebral cement augmentation, a variety of representations of the shape of the cement domain have been used. In the literature, only very limited attention has been given to the issue of the influence of cement domain shape representation on biomechanical parameters for a given combination of model and loading. This issue is the subject of the present work, with the model being of the L1-L3 motion segments. Augmentation of an unfractured L2 (prophylactic augmentation) was simulated, three cement domain shapes were considered — namely, solid cylinder, with rounded edges; two prolate spheroids; and oblate spheroid — and the applied loading comprised a simultaneous application of a uniform compressive pressure of 0.53 MPa (equivalent to an 800-N compression load) and a counter-clockwise-acting axial rotation moment of 1 Nm to the superior surface of L1. It was found that (1) while the cement domain shape representation has a marked influence on the mean von Mises stress (σAVM), the maximum von Mises stress (σMVM), and the strain energy density (MSED) distribution in the cement domain, its influence on each of these parameters in each of the biological tissues in the model as well as on the total segmental range of motion is minimal and (2) for σAVM and σMVM, the lowest value of each of these parameters was obtained when the oblate spheroid model was used. From both clinical and computational perspectives, these findings are significant. For example, the latter finding suggests that there is scope for researching the combination of key process variables used, such as the cement chemistry, the cement delivery system, and the augmentation technique/approach, that would ensure that the final cement domain shape in cement-augmented VBs of patients be oblate spheroid on a consistent and predictable basis.

scholarly journals Influence of PEEK Coating on Hip Implant Stress Shielding: A Finite Element Analysis

2016 ◽  
Vol 2016 ◽  
pp. 1-10 ◽  
Author(s):  
Jesica Anguiano-Sanchez ◽  
Oscar Martinez-Romero ◽  
Hector R. Siller ◽  
Jose A. Diaz-Elizondo ◽  
Eduardo Flores-Villalba ◽  
...  
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Cancellous Bone ◽  
Stress Shielding ◽  
Design Concept ◽  
Von Mises Stress ◽  
Hip Implants ◽  
Element Analysis ◽  
Stress Transmission ◽  
Von Mises

Stress shielding is a well-known failure factor in hip implants. This work proposes a design concept for hip implants, using a combination of metallic stem with a polymer coating (polyether ether ketone (PEEK)). The proposed design concept is simulated using titanium alloy stems and PEEK coatings with thicknesses varying from 100 to 400 μm. The Finite Element analysis of the cancellous bone surrounding the implant shows promising results. The effective von Mises stress increases between 81 and 92% for the complete volume of cancellous bone. When focusing on the proximal zone of the implant, the increased stress transmission to the cancellous bone reaches between 47 and 60%. This increment in load transferred to the bone can influence mineral bone loss due to stress shielding, minimizing such effect, and thus prolonging implant lifespan.

Simulation Using Finite Element Analysis in the Optimization of Inflatable Bedpan Wall Thickness

2015 ◽  
Vol 754-755 ◽  
pp. 747-751
Author(s):  
M. Hakim Ibrahim ◽  
S. Shahnaz S. Bakar ◽  
Luqman Musa ◽  
S. Yahud ◽  
S. Zaharah Ahmad ◽  
...  
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Static Analysis ◽  
Polyvinyl Chloride ◽  
Structure Analysis ◽  
Cross Section ◽  
Von Mises Stress ◽  
Static Structure ◽  
Element Analysis ◽  
Von Mises

The inflatable bedpan is designed to provide comfortable, convenient, safe, hygienic, efficient and easy to use to the patients and their caretakers. In order to investigate the suitability thickness of inflatable bedpan for the pressure inflow in bedpan tube, the analysis is done using Catia analysis. The static analysis work is carried out to inflatable bedpan cross section of polyvinyl chloride (PVC) and their relative performances have been observed respectively. The thickness 0.5 mm shows the highest Von Mises Stress which is 21100 kPa compared to 0.8and 1.0 mm thicknesses. The lowest Von Mises Stress observed at thickness 1.0 mm which is 2990 kPa. The less stress obtained can encourage perfect shape of the design. In this paper, by observing the result of static structure analysis obtained, 1 mm is suggested as best thickness to be used as an inflatable bedpan wall because it can withstand more pressure while maintaining its stability.

Experimental Study and Finite Element Analysis of the Performance of Reciprocating Seal in Rapping Device of Gasifier

2010 ◽  
Vol 42 ◽  
pp. 48-53
Author(s):  
Jiu Yang Yu ◽  
Jiu Yang Gao ◽  
Wei Lin ◽  
Cheng Gang Wang ◽  
Yan Yang Wu ◽  
...  
Keyword(s):  
Finite Element Method ◽  
Finite Element Analysis ◽  
Experimental Study ◽  
Finite Element ◽  
Contact Stress ◽  
Power Loss ◽  
Von Mises Stress ◽  
Seal Ring ◽  
Element Analysis ◽  
Von Mises

The performance of reciprocating seals in rapping device of gasifier was studied through finite element method. The contact stress, Von-Mises stress, and friction power loss of O-ring and Sliding-ring combined Seal-ring were obtained. Meanwhile, the experimental study in performance of seal structures of rapping device were carried out. The results show that both of the seal structures are satisfied seal requirement, but compared with the Sliding-ring combined Seal-ring, the O-ring is easier to be destroyed and power loss of O-ring is higher than Sliding-ring combined Seal-ring. The results also verify the superiority of Sliding-ring combined Seal-ring in rapping device of gasifier.

Sign in / Sign up

Export Citation Format

Share Document