Highly transparent and flexible graphitic C3N4 nanowire/PVA/PEDOT:PSS supercapacitors for transparent electronic devices

2020 ◽  
Vol 13 (02) ◽  
pp. 2051006
Author(s):  
Jialun Li ◽  
Xueyu Zhang ◽  
Xuesong Li ◽  
Lianfeng Duan ◽  
Xijia Yang ◽  
...  
Keyword(s):  
Solid State ◽  
Motion Detection ◽  
Power Supply ◽  
Electronic Devices ◽  
Transparent Film ◽  
Capacitance Change ◽  
Vacuum Filtration ◽  
Integrated Electronics ◽  
Wearable Electronic ◽  
Wearable Electronic Devices

To achieve reliable flexibility and acceptable transparency for integrated electronics, the power supply sources of these devices have to meet the requirement of flexibility and transparency. Herein, we developed a facile and non-toxic way to manufacture all-solid-state supercapacitors with high capacitive performance, transparency and flexibility. The as-prepared g-C3N4 nanowires are distributed in Polyvinyl Alcohol (PVA) and Poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate) (PEDOT:PSS) solution, transparent film could be formed by vacuum filtration. The g-C3N4 nanowires provide pseudocapacitance and PVA and PEDOT:PSS matrix provides bendable and stretchable ability. The g-C3N4/PVA electrode achieves a specific areal capacitance of 3.51[Formula: see text]mF[Formula: see text]cm[Formula: see text] with transparency of 85%, and that of g-C3N4/PVA/PEDOT:PSS is 5.32[Formula: see text]mF[Formula: see text]cm[Formula: see text] with transparency of 72%. The facile process provides a reasonable architecture for the preparation of a variety of flexible, transparent and wearable electronic devices. The flexible and transparent devices show an instant response to the finger bending with the capacitance change of more than 25%, which provides the possibility for fabricating smart flexible device to monitor human health and motion detection.

Self-Powered Flexible Sensing System Based on Super-Tough, High Ionic Conductivity and Rapid Self-Recovery Fully Physically Crosslinked Double Network Hydrogel

2022 ◽  
Author(s):  
Shaoji Wu ◽  
Li Tang ◽  
Yue Xu ◽  
Guangcong Tang ◽  
Bailin Dai ◽  
...  
Keyword(s):  
Solid State ◽  
Power Supply ◽  
Electronic Devices ◽  
Flexible Sensors ◽  
Double Network ◽  
Sensing System ◽  
Wearable Electronic ◽  
Self Powered ◽  
Physically Crosslinked ◽  
Wearable Electronic Devices

At present, hydrogel flexible sensors have attracted wide attention in the field of wearable electronic devices. However, hydrogel flexible sensors need external solid state power supply to output stable signals....

Series of in-fiber graphene supercapacitors for flexible wearable devices

2015 ◽  
Vol 3 (6) ◽  
pp. 2547-2551 ◽  
Author(s):  
Yuan Liang ◽  
Zhi Wang ◽  
Jiao Huang ◽  
Huhu Cheng ◽  
Fei Zhao ◽  
...  
Keyword(s):  
Solid State ◽  
Electronic Devices ◽  
Wearable Devices ◽  
Wearable Electronic ◽  
Wearable Electronic Devices

An integrated series of in-fiber all-solid-state graphene supercapacitors have been fabricated for flexible wearable electronic devices.

Flexible, sandwich-like CNTs/NiCo2O4 hybrid paper electrodes for all-solid state supercapacitors

2017 ◽  
Vol 5 (12) ◽  
pp. 5886-5894 ◽  
Author(s):  
Yongjia Zheng ◽  
Zhiqiang Lin ◽  
Wenjun Chen ◽  
Binghao Liang ◽  
Huiwei Du ◽  
...  
Keyword(s):  
Solid State ◽  
Storage Systems ◽  
Electronic Devices ◽  
Flexible Supercapacitors ◽  
Wearable Electronic ◽  
Increasing Demand ◽  
Wearable Electronic Devices

With the increasing demand for compact storage systems for portable and wearable electronic devices, flexible supercapacitors with high volumetric performance have attracted considerable attention.

Durable, flexible self-standing hydrogel electrolytes enabling high-safety rechargeable solid-state zinc metal batteries

2018 ◽  
Vol 6 (45) ◽  
pp. 23046-23054 ◽  
Author(s):  
Qi Han ◽  
Xiaowei Chi ◽  
Shuming Zhang ◽  
Yunzhao Liu ◽  
Biao Zhou ◽  
...  
Keyword(s):  
Solid State ◽  
Electronic Devices ◽  
Zinc Metal ◽  
Wearable Electronic ◽  
Wearable Electronic Devices ◽  
Safety And Stability

The boom of flexible and wearable electronic devices boosts the development of flexible batteries with high safety and stability.

Characteristics of Discharge Currents Measured through Body-Attached Metal for Modeling ESD from Wearable Electronic Devices

2016 ◽  
Vol E99.B (1) ◽  
pp. 186-191 ◽  
Author(s):  
Takeshi ISHIDA ◽  
Fengchao XIAO ◽  
Yoshio KAMI ◽  
Osamu FUJIWARA ◽  
Shuichi NITTA
Keyword(s):  
Electronic Devices ◽  
Wearable Electronic ◽  
Wearable Electronic Devices

scholarly journals Recent Progress of Fluxgate Magnetic Sensors: Basic Research and Application

Sensors ◽  
2021 ◽  
Vol 21 (4) ◽  
pp. 1500
Author(s):  
Songrui Wei ◽  
Xiaoqi Liao ◽  
Han Zhang ◽  
Jianhua Pang ◽  
Yan Zhou
Keyword(s):  
Recent Progress ◽  
Electronic Devices ◽  
Basic Research ◽  
Research Direction ◽  
Magnetic Sensor ◽  
Magnetic Sensors ◽  
Future Research ◽  
Calibration Methods ◽  
Wearable Electronic ◽  
Wearable Electronic Devices

Fluxgate magnetic sensors are especially important in detecting weak magnetic fields. The mechanism of a fluxgate magnetic sensor is based on Faraday’s law of electromagnetic induction. The structure of a fluxgate magnetic sensor mainly consists of excitation windings, core and sensing windings, similar to the structure of a transformer. To date, they have been applied to many fields such as geophysics and astro-observations, wearable electronic devices and non-destructive testing. In this review, we report the recent progress in both the basic research and applications of fluxgate magnetic sensors, especially in the past two years. Regarding the basic research, we focus on the progress in lowering the noise, better calibration methods and increasing the sensitivity. Concerning applications, we introduce recent work about fluxgate magnetometers on spacecraft, unmanned aerial vehicles, wearable electronic devices and defect detection in coiled tubing. Based on the above work, we hope that we can have a clearer prospect about the future research direction of fluxgate magnetic sensor.

Engineering flexible carbon nanofibers concatenated MOFs-derived hollow octahedral CoFe2O4 as anode materials for enhanced lithium storage

2021 ◽  
Author(s):  
Fangfang Xue ◽  
Yangyang Li ◽  
Chen Liu ◽  
Zhigang Zhang ◽  
Jun Lin ◽  
...  
Keyword(s):  
Mechanical Property ◽  
Anode Materials ◽  
Electrode Materials ◽  
Electronic Devices ◽  
High Capacity ◽  
Lithium Ion ◽  
Lithium Storage ◽  
Excellent Mechanical Property ◽  
Wearable Electronic ◽  
Wearable Electronic Devices

Constructing suitable electrode materials with high capacity and excellent mechanical property is indispensable for flexible lithium-ion batteries (LIBs) to satisfy the growing flexible and wearable electronic devices. Herein, a necklace-like...

scholarly journals Textile-Based Triboelectric Nanogenerators for Wearable Self-Powered Microsystems

Micromachines ◽  
2021 ◽  
Vol 12 (2) ◽  
pp. 158
Author(s):  
Peng Huang ◽  
Dan-Liang Wen ◽  
Yu Qiu ◽  
Ming-Hong Yang ◽  
Cheng Tu ◽  
...  
Keyword(s):  
Rapid Development ◽  
Electronic Devices ◽  
Quantitative Relationship ◽  
Triboelectric Nanogenerator ◽  
Output Performance ◽  
Integrated Microsystems ◽  
Wearable Electronic ◽  
Self Powered ◽  
Representative Work ◽  
Wearable Electronic Devices

In recent years, wearable electronic devices have made considerable progress thanks to the rapid development of the Internet of Things. However, even though some of them have preliminarily achieved miniaturization and wearability, the drawbacks of frequent charging and physical rigidity of conventional lithium batteries, which are currently the most commonly used power source of wearable electronic devices, have become technical bottlenecks that need to be broken through urgently. In order to address the above challenges, the technology based on triboelectric effect, i.e., triboelectric nanogenerator (TENG), is proposed to harvest energy from ambient environment and considered as one of the most promising methods to integrate with functional electronic devices to form wearable self-powered microsystems. Benefited from excellent flexibility, high output performance, no materials limitation, and a quantitative relationship between environmental stimulation inputs and corresponding electrical outputs, TENGs present great advantages in wearable energy harvesting, active sensing, and driving actuators. Furthermore, combined with the superiorities of TENGs and fabrics, textile-based TENGs (T-TENGs) possess remarkable breathability and better non-planar surface adaptability, which are more conducive to the integrated wearable electronic devices and attract considerable attention. Herein, for the purpose of advancing the development of wearable electronic devices, this article reviews the recent development in materials for the construction of T-TENGs and methods for the enhancement of electrical output performance. More importantly, this article mainly focuses on the recent representative work, in which T-TENGs-based active sensors, T-TENGs-based self-driven actuators, and T-TENGs-based self-powered microsystems are studied. In addition, this paper summarizes the critical challenges and future opportunities of T-TENG-based wearable integrated microsystems.

Sign in / Sign up

Export Citation Format

Share Document