The Franklinian Composite Tectono-Sedimentary Element, North Greenland

2021 ◽  
pp. M57-2020-6
Author(s):  
John R. Hopper ◽  
Jon R. Ineson
Keyword(s):  
Heat Flow ◽  
Passive Margin ◽  
Thrust Belt ◽  
Reservoir Properties ◽  
Good Source ◽  
Petroleum Potential ◽  
The North ◽  
Fold And Thrust Belt ◽  
North Greenland ◽  
Mixed Carbonate

AbstractThe Franklinian margin composite tectono-sedimentary element (CTSE) in North Greenland is dominated by Neoproterozoic - lowermost Devonian sedimentary strata that include early syn-rift through passive margin TSEs of mixed carbonate and siliciclastic facies. The sedimentary successions are well exposed in much of northern Greenland, but locally were strongly affected by the Ellesmerian Orogeny, resulting in a fold and thrust belt that deformed the northernmost exposures. An exposed palaeo-oilfield attests to the petroleum potential of the basin. Several formations have good source potential and several others have good reservoir properties. Palaeo-heat flow indicators show that temperatures increase to the north, where much of the basin is over-mature. Because of the remoteness of the area and the restricted locations where petroleum potential is likely to remain, the basin is not currently a target for exploration.

scholarly journals U–Pb dating of middle Eocene–Pliocene multiple tectonic pulses in the Alpine foreland

Solid Earth ◽  
2021 ◽  
Vol 12 (11) ◽  
pp. 2539-2551
Author(s):  
Luca Smeraglia ◽  
Nathan Looser ◽  
Olivier Fabbri ◽  
Flavien Choulet ◽  
Marcel Guillong ◽  
...  
Keyword(s):  
Middle Eocene ◽  
Regional Scale ◽  
Earthquake Hazard ◽  
Late Eocene ◽  
Passive Margin ◽  
Tectonic Activity ◽  
Thrust Belt ◽  
Fold And Thrust Belt ◽  
Earthquake Hazard Assessment ◽  
Alpine Foreland

Abstract. Foreland fold-and-thrust belts (FTBs) record long-lived tectono-sedimentary activity, from passive margin sedimentation, flexuring, and further evolution into wedge accretion ahead of an advancing orogen. Therefore, dating fault activity is fundamental for plate movement reconstruction, resource exploration, and earthquake hazard assessment. Here, we report U–Pb ages of syn-tectonic calcite mineralizations from four thrusts and three tear faults sampled at the regional scale across the Jura fold-and-thrust belt in the northwestern Alpine foreland (eastern France). Three regional tectonic phases are recognized in the middle Eocene–Pliocene interval: (1) pre-orogenic faulting at 48.4±1.5 and 44.7±2.6 Ma associated with the far-field effect of the Alpine or Pyrenean compression, (2) syn-orogenic thrusting at 11.4±1.1, 10.6±0.5, 9.7±1.4, 9.6±0.3, and 7.5±1.1 Ma associated with the formation of the Jura fold-and-thrust belt with possible in-sequence thrust propagation, and (3) syn-orogenic tear faulting at 10.5±0.4, 9.1±6.5, 5.7±4.7, and at 4.8±1.7 Ma including the reactivation of a pre-orogenic fault at 3.9±2.9 Ma. Previously unknown faulting events at 48.4±1.5 and 44.7±2.6 Ma predate the reported late Eocene age for tectonic activity onset in the Alpine foreland by ∼10 Myr. In addition, we date the previously inferred reactivation of pre-orogenic strike-slip faults as tear faults during Jura imbrication. The U–Pb ages document a minimal time frame for the evolution of the Jura FTB wedge by possible in-sequence thrust imbrication above the low-friction basal decollement consisting of evaporites.

Controls on the evolution of passive-margin salt basins: Structure and evolution of the Salina del Bravo region, northeastern Mexico

2019 ◽  
Vol 132 (5-6) ◽  
pp. 997-1012 ◽  
Author(s):  
Michael R. Hudec ◽  
Tim P. Dooley ◽  
Frank J. Peel ◽  
Juan I. Soto
Keyword(s):  
Seismic Data ◽  
Passive Margin ◽  
Salt Tectonics ◽  
Structural Systems ◽  
Thrust Belt ◽  
Entire Region ◽  
Fold And Thrust Belt ◽  
Gravity Driven ◽  
Northeastern Mexico ◽  
Uplift History

Abstract Passive-margin salt basins tend to be much more deformed than their nonsalt equivalents, but they are by no means all the same. We used seismic data to study the Salina del Bravo region, northeast Mexico, to investigate the ways in which margin configuration and postsalt uplift history can influence passive-margin salt tectonics. The Salina del Bravo area contains four main structural systems, all of which trend NNE across the entire region. These structures are the Bravo trough, Sigsbee salt canopy, Perdido fold-and-thrust belt, and BAHA high. Gravity-driven deformation did not begin until more than 130 m.y. after salt deposition, because of buttressing against the BAHA high. We suggest that deformation was ultimately triggered in the Cenozoic by Cordilleran uplift that tilted the margin seaward and created a major sediment source terrane. Sediments shed from the uplift expelled salt seaward to form the Sigsbee canopy. At the same time, tilted and loaded sediments were translated seaward on the Louann salt until they were buttressed against the BAHA high, forming the Perdido fold-and-thrust belt. A physical model was built to test this hypothesis. The model was able to reproduce most of the major structures in the region, suggesting that the hypothesis is reasonable. The Salina del Bravo region shows how a downdip buttress can inhibit gravity-driven salt deformation in passive-margin salt basins. Furthermore, the area also shows the importance of postsalt uplift, which can destabilize a margin through a combination of tilting and sedimentation.

scholarly journals Possible Quaternary growth of a hidden anticline at the front of the Jura fold-and-thrust belt: geomorphological constraints from the Forêt de Chaux area, France

2011 ◽  
Vol 182 (4) ◽  
pp. 337-346 ◽  
Author(s):  
Stéphane Molliex ◽  
Olivier Fabbri ◽  
Vincent Bichet ◽  
Herfried Madritsch
Keyword(s):  
Focal Depth ◽  
Fault Reactivation ◽  
Thrust Belt ◽  
Alluvial Deposits ◽  
The North ◽  
Basement Faults ◽  
Fold And Thrust Belt ◽  
Median Position ◽  
Differential Uplift ◽  
River Migration

Abstract This study presents new constraints for Plio-Quaternary (post-2.4 Ma to present-day) anticline growth along the frontal zone of the Jura fold-and-thrust belt, in the Forêt de Chaux area, located 30 km SW of Besançon. The Forêt de Chaux area consists of a N080°E-elongated depression bordered by the Doubs and Loue rivers to the north and south respectively, and filled with Sundgau-type Pliocene alluvial deposits. The upper surface of the Pliocene deposits between the Loue and Doubs rivers is marked by a N065°E-trending ridge crossing the depression in a median position. A differential uplift along this ridge, post-dating the deposition of the gravels (2.4 Ma), is suggested by several geomorphological observations such as the opposite river migration on each side of the ridge as well as variations of drainage geometry and incision intensity. Geological and geophysical subsurface data indicate that the ridge roughly coincides with the axis of an anticline hidden beneath the Pliocene deposits. The observed uplift is presumably related to a post-2.4 Ma anticline growth. The fact that the azimuth of the hidden anticline axis is parallel to the strike of deep-seated Late Paleozoic basement faults and not to the local strike of the thin-skinned Jura structures indicates that the inferred post-Pliocene deformation could possibly be an expression of a recent thick-skinned deformation of the basement of the northern Alpine foreland. The focal depth (15 km) of the February 24th, 2004, Besançon earthquake supports the hypothesis of a basement fault reactivation.

Thermal imprints along conjugated continental margins in response to the opening of the northern North Atlantic - case studies from eastern North Greenland and western Svalbard

2021 ◽  
Author(s):  
Katrin Meier ◽  
Paul O'Sullivan ◽  
Malte Jochmann ◽  
Patrick Monien ◽  
Karsten Piepjohn ◽  
...  
Keyword(s):  
Heat Flow ◽  
North Atlantic ◽  
Thermal History ◽  
Vitrinite Reflectance ◽  
Continental Margins ◽  
Thermal Maturity ◽  
Quartz Veins ◽  
The North ◽  
Reflectance Data ◽  
North Greenland

<p>Prior to break up of Greenland and Svalbard, the Wandel sea basin with Carboniferous to Cenozoic deposits formed in eastern North Greenland. These deposits were affected by the last major period of Arctic tectonism, the Eocene Eurekan deformation. Vitrinite reflectance data from late Cretaceous rocks long the east coast of North Greenland indicate unusual high thermal maturity in association with a swarm of quartz veins, which exceeds the thermal maturity associated with the Eurekan deformation further inland. This pattern is also observed in Cenozoic sediments further to the north as well as along the conjugated North Atlantic margin, in western Svalbard. However, cause and origin of the elevated heat flow indicated by thermal maturity values are not known so far and the timing is not well constrained. We test the hypothesis whether this pattern was established coevally along both margins of the North Atlantic and marks a post-Eurekan thermal event. Vitrinite reflectance data indicate temperatures high enough to reset low temperature chronometers, therefore we used apatite fission track (AFT) and (U-Th-Sm)/He (AHe) thermochronology to determine the age of the high thermal maturation and associated quartz veins formation.</p><p>Our data reveals a more complex thermal history than hypothesized:<br>For the eastern North Greenland margin thermal history modelling of the combined AFT and AHe ages indicates a pre-Eurekan phase of elevated heat flow between 72 Ma and 66 Ma causing the high vitrinite reflectance and the formation of the quartz veins in the late Cretaceous rocks. Additional petrographic and electron microprobe analysis reveals the growth of feldspar, hematite, amphibole, and tourmaline within the quartz veins. According to most paleogeographic reconstructions, northern Greenland was located to the south of Svalbard close to a volcanic province near Bear Island. Heating may thus be associated with incipient igneous activity of that area, related to initial North Atlantic opening. A second phase of elevated heat flow between 58 Ma and 52 Ma is indicated by thermal history modelling of the AFT and AHe ages from the Cenozoic rocks further north. This frames the timing of the initiation of the dextral displacement between Greenland and Svalbard and might be associated with heat transfer along the transform fault from the active spreading centres in the North Atlantic and the Arctic Ocean.<br>Contrasting to the results of North Greenland, thermal history modelling of AFT and AHe ages from the Cenozoic rocks of western Svalbard reveals heating throughout the Eocene and onset of cooling only during the early Oligocene for the Svalbard margin. Thus, even though we cannot exclude a similar thermal history during the Paleocene to early Eocene, the eastern North Greenland and western Svalbard margins are characterized by a differential thermal evolution during the ~middle Eocene to Oligocene.</p><p>In conclusion, our data show that the thermal history of the conjugated continental margins along the northern North Atlantic is characterized by episodic heat flow variations predominantly controlled by oceanic plate tectonic processes.</p>

scholarly journals The Saint-Ursanne earthquakes of 2000 revisited: evidence for active shallow thrust-faulting in the Jura fold-and-thrust belt

2022 ◽  
Vol 115 (1) ◽  
Author(s):  
Federica Lanza ◽  
Tobias Diehl ◽  
Nicholas Deichmann ◽  
Toni Kraft ◽  
Christophe Nussbaum ◽  
...  
Keyword(s):  
Template Matching ◽  
Sedimentary Cover ◽  
Mechanism Analysis ◽  
Thrust Belt ◽  
Northern Switzerland ◽  
Thrust Faulting ◽  
The North ◽  
Fold And Thrust Belt ◽  
New Findings ◽  
Mont Terri

AbstractThe interpretation of seismotectonic processes within the uppermost few kilometers of the Earth’s crust has proven challenging due to the often significant uncertainties in hypocenter locations and focal mechanisms of shallow seismicity. Here, we revisit the shallow seismic sequence of Saint-Ursanne of March and April 2000 and apply advanced seismological analyses to reduce these uncertainties. The sequence, consisting of five earthquakes of which the largest one reached a local magnitude (ML) of 3.2, occurred in the vicinity of two critical sites, the Mont Terri rock laboratory and Haute-Sorne, which is currently evaluated as a possible site for the development of a deep geothermal project. Template matching analysis for the period 2000–2021, including data from mini arrays installed in the region since 2014, suggests that the source of the 2000 sequence has not been persistently active ever since. Forward modelling of synthetic waveforms points to a very shallow source, between 0 and 1 km depth, and the focal mechanism analysis indicates a low-angle, NNW-dipping, thrust mechanism. These results combined with geological data suggest that the sequence is likely related to a backthrust fault located within the sedimentary cover and shed new light on the hosting lithology and source kinematics of the Saint-Ursanne sequence. Together with two other more recent shallow thrust faulting earthquakes near Grenchen and Neuchâtel in the north-central portion of the Jura fold-and-thrust belt (FTB), these new findings provide new insights into the present-day seismotectonic processes of the Jura FTB of northern Switzerland and suggest that the Jura FTB is still undergoing seismically active contraction at rates likely < 0.5 mm/yr. The shallow focal depths provide indications that this low-rate contraction in the NE portion of the Jura FTB is at least partly accommodated within the sedimentary cover and possibly decoupled from the basement.

The 2020 Mw 6.0 Jiashi Earthquake: Coinvolvement of Thin-Skinned Thrusting and Basement Shortening in Shaping the Keping-Tage Fold-and-Thrust Belt in Southwestern Tian Shan

2021 ◽  
Author(s):  
Yuqing He ◽  
Teng Wang ◽  
Lihua Fang ◽  
Li Zhao
Keyword(s):  
Surface Deformation ◽  
Reverse Fault ◽  
Thrust Belt ◽  
Coulomb Stress Changes ◽  
The North ◽  
Fold And Thrust Belt ◽  
Stress Changes ◽  
Mountain Front ◽  
Tear Fault ◽  
Tian Shan

Abstract The Keping-tage fold-and-thrust belt in southwest Tian Shan is seismically active, yet the most well-recorded earthquakes occurred south of the mountain front. The lack of large earthquakes beneath the fold-and-thrust belt thus hinders our understanding of the orogenic process to the north. The 2020 Mw 6.0 Jiashi earthquake is an important event with surface deformation in the fold-and-thrust belt well illuminated by Interferometric Synthetic Aperture Radar, providing an opportunity to study the present-day kinematics of the thrust front through the analysis of satellite measurements of surface deformations. Here, we employ the surface deformation and relocated aftershocks to investigate the fault-slip distribution associated to this event. Further added by an analysis of Coulomb stress changes, we derive a fault model involving slips on a shallow, low-angle (∼10°) north-dipping thrust fault as well as on a left-lateral tear fault and a high-angle south-dipping reverse fault in mid-crust. Aftershocks at depth reflect the basement-involved shortening activated by a thin-skinned thrust faulting event. In addition, this earthquake uplifted the southernmost mountain front with relatively low topography, indicating the basin-ward propagation of the southwest Tian Shan.

Mid-crustal detachment beneath southern Timor-Leste: seismic evidence for Australian basement in the Timor collision complex (and implications for prospectivity)

2021 ◽  
Author(s):  
T. R. Charlton
Keyword(s):  
Seismic Data ◽  
Passive Margin ◽  
Petroleum Exploration ◽  
Seismic Survey ◽  
Normal Faults ◽  
Thrust Belt ◽  
Collision Complex ◽  
Fold And Thrust Belt ◽  
Timor Leste ◽  
Seismic Sections

Seismic data originally acquired over SW Timor-Leste in 1994 shows two consistent seismic reflectors mappable across the study area. The shallower ‘red’ reflector (0.4-1s twt) deepens southward, although with a block-faulted morphology. The normal faults cutting the red marker tend to merge downward into the deeper ‘blue’ marker horizon (0.5-2.8s twt), which also deepens southward. Drilling intersections in the Matai petroleum exploration wells demonstrate that the red marker horizon corresponds to the top of metamorphic basement (Lolotoi Complex), while the blue marker horizon has the geometry of a mid-crustal extensional detachment. We see no indications for thrusting on the seismic sections below the red marker horizon, consistent with studies of the Lolotoi Complex at outcrop. However, surficial geology over much of the seismic survey area comprises a thin-skinned fold and thrust belt, established in 8 wells to overlie the Lolotoi Complex. We interpret the fold and thrust belt as the primary expression of Neogene arc-continent collisional orogeny, while the Lolotoi Complex represents Australian continental basement underthrust beneath the collision complex. In the seismic data the basal décollement to the thrust belt dips southward beneath the synorogenic Suai Basin on the south coast of Timor, and presumably continues southward beneath the offshore fold and thrust belt, linking into the northward-dipping décollement that emerges at the Timor Trough deformation front. The same seismic dataset has been interpreted by Bucknill et al. (2019) in terms of emplacement of an Asian allochthon on top of an imbricated Australian passive margin succession. These authors further interpreted a subthrust anticlinal exploration prospect beneath the allochthon, which Timor Resources plan to drill in 2021. This well (Lafaek) will have enormous significance not only commercially, but potentially also in resolving the long-standing allochthon controversy in Timor: i.e., does the Lolotoi Complex represent ‘Australian’ or ‘Asian’ basement?

Sign in / Sign up

Export Citation Format

Share Document