scholarly journals Fault seal modelling – the influence of fluid properties on fault sealing capacity in hydrocarbon and CO2 systems

2020 ◽  
Vol 26 (3) ◽  
pp. 481-497 ◽  
Author(s):  
Rūta Karolytė ◽  
Gareth Johnson ◽  
Graham Yielding ◽  
Stuart M.V. Gilfillan
Keyword(s):  
Contact Angle ◽  
Capillary Pressure ◽  
Petroleum Industry ◽  
Interfacial Tensions ◽  
Link Type ◽  
Sealing Capacity ◽  
Fluid Properties ◽  
Supplementary Material ◽  
Modelling Methods ◽  
Threshold Capillary Pressure

Fault seal analysis is a key part of understanding the hydrocarbon trapping mechanisms in the petroleum industry. Fault seal research has also been expanded to CO2–brine systems for the application to carbon capture and storage (CCS). The wetting properties of rock-forming minerals in the presence of hydrocarbons or CO2 are a source of uncertainty in the calculations of capillary threshold pressure, which defines the fault sealing capacity. Here, we explore this uncertainty in a comparison study between two fault-sealed fields located in the Otway Basin, SE Australia. The Katnook Field in the Penola Trough is a methane field, while Boggy Creek in Port Campbell contains a high-CO2–methane mixture. Two industry standard fault seal modelling methods, one based on laboratory measurements of fault samples and the other based on a calibration of a global dataset of known sealing faults, are used to discuss their relative strengths and applicability to the CO2 storage context. We identify a range of interfacial tensions and contact angle values in the hydrocarbon–water system under the conditions assumed by the second method. Based on this, the uncertainty related to the spread in fluid properties was determined to be 24% of the calculated threshold capillary pressure value. We propose a methodology of threshold capillary pressure conversion from hydrocarbons–brine to the CO2–brine system, using an input of appropriate interfacial tension and contact angle under reservoir conditions. The method can be used for any fluid system where fluid properties are defined by these two parameters.Supplementary material: (1) Fault seal modelling methods and calculations, and (2) hydrocarbon and CO2 interfacial tensions and contact angle values collected in the literature are available at https://doi.org/10.6084/m9.figshare.c.4877049This article is part of the Energy Geoscience Series available at https://www.lyellcollection.org/cc/energy-geoscience-series

scholarly journals Correction for Kiel and Goedert, Deep-sea food bonanzas: early Cenozoic whale-fall communities resemble wood-fall rather than seep communities

2006 ◽  
Vol 273 (1605) ◽  
pp. 3133-3133
Author(s):  
Steffen Kiel ◽  
James L. Goedert
Keyword(s):  
Deep Sea ◽  
Electronic Supplementary Material ◽  
Complete List ◽  
Related Article ◽  
Link Type ◽  
Article Type ◽  
Supplementary Material ◽  
Early Cenozoic ◽  
Wood Fall

Correction for ‘Deep-sea food bonanzas: early Cenozoic whale-fall communities resemble wood-fall rather than seep communities’ by Steffen Kiel and James L. Goedert (Proc. R. Soc. B 273 , 2625–2631. (doi: 10.1098/rspb.2006.3620 )). On page 2626, seven lines before the end of section 2, the complete list of sites and species is available online, but is not published as electronic supplementary material to this paper.

Modeling Gas-Liquid Head Performance of Electrical Submersible Pumps

2004 ◽  
Author(s):  
Datong Sun ◽  
Mauricio Prado
Keyword(s):  
Petroleum Industry ◽  
Nuclear Industry ◽  
Two Phase ◽  
Liquid Model ◽  
Electrical Submersible Pumps ◽  
Pump Head ◽  
Fluid Properties ◽  
Interfacial Characteristic ◽  
Model Equations ◽  
Shock Loss

This study presents a new gas-liquid model to predict Electrical Submersible Pumps (ESP) head performance. The newly derived approach based on gas-liquid momentum equations along pump channels has improved the Sachdeva model [1, 2] in the petroleum industry and generalized the Minemura model [3] in the nuclear industry. The new two-phase model includes novel approaches for wall frictional losses for each phase using a gas-liquid stratified assumption and existing correlations, a new shock loss model incorporating rotational speeds, a new correlation for drag coefficient and interfacial characteristic length effects by fitting the model results with experimental data, and an algorithm to solve the model equations. The model can predict pressure and void fraction distributions along impellers and diffusers in addition to the pump head performance curve under different fluid properties, pump intake conditions, and rotational speeds.

scholarly journals PathScore: a web tool for identifying altered pathways in cancer data

2016 ◽  
Author(s):  
Stephen G. Gaffney ◽  
Jeffrey P. Townsend
Keyword(s):  
Web Application ◽  
Somatic Mutations ◽  
Supplementary Information ◽  
Web Tool ◽  
Cancer Data ◽  
Link Type ◽  
Novel Approach ◽  
Supplementary Material ◽  
User Friendly ◽  
Pathway Effect

ABSTRACTSummaryPathScore quantifies the level of enrichment of somatic mutations within curated pathways, applying a novel approach that identifies pathways enriched across patients. The application provides several user-friendly, interactive graphic interfaces for data exploration, including tools for comparing pathway effect sizes, significance, gene-set overlap and enrichment differences between projects.Availability and ImplementationWeb application available at pathscore.publichealth.yale.edu. Site implemented in Python and MySQL, with all major browsers supported. Source code available at github.com/sggaffney/pathscore with a GPLv3 [email protected] InformationAdditional documentation can be found at http://pathscore.publichealth.yale.edu/faq.

scholarly journals Estimation of Oil-Water Contact Level Using Different Approaches: A Case Study for an Iraqi Carbonate Reservoir

2020 ◽  
Vol 10 (2) ◽  
pp. 95-113
Author(s):  
Wisam I. Al-Rubaye ◽  
Dhiaa S. Ghanem ◽  
Hussein Mohammed Kh ◽  
Hayder Abdulzahra ◽  
Ali M. Saleem ◽  
...  
Keyword(s):  
Capillary Pressure ◽  
Reservoir Characterization ◽  
Petroleum Industry ◽  
Carbonate Reservoir ◽  
Oil Field ◽  
Accurate Estimation ◽  
Water Contact ◽  
Oil Water ◽  
Original Oil In Place ◽  
Drainage Data

In petroleum industry, an accurate description and estimation of the Oil-Water Contact(OWC) is very important in quantifying the resources (i.e. original oil in place (OIIP)), andoptimizing production techniques, rates and overall management of the reservoir. Thus,OWC accurate estimation is crucial step for optimum reservoir characterization andexploration. This paper presents a comparison of three different methods (i.e. open holewell logging, MDT test and capillary pressure drainage data) to determine the oil watercontact of a carbonate reservoir (Main Mishrif) in an Iraqi oil field "BG”. A total of threewells from "BG" oil field were evaluated by using interactive petrophysics software "IPv3.6". The results show that using the well logging interpretations leads to predict OWCdepth of -3881 mssl. However, it shows variance in the estimated depth (WELL X; -3939,WELL Y; -3844, WELL Z; -3860) mssl, which is considered as an acceptable variationrange due to the fact that OWC height level in reality is not constant and its elevation isusually changed laterally due to the complicated heterogeneity nature of the reservoirs.Furthermore, the results indicate that the MDT test can predict a depth of OWC at -3889mssl, while the capillary drainage data results in a OWC depth of -3879 mssl. The properMDT data and SCAL data are necessary to reduce the uncertainty in the estimationprocess. Accordingly, the best approach for estimating OWC is the combination of MDTand capillary pressure due to the field data obtained are more reliable than open hole welllogs with many measurement uncertainties due to the fact of frequent borehole conditions.

scholarly journals Environmental variability in response to abrupt climatic change during the Last Glacial–Interglacial Transition (16–8 cal ka BP): evidence from Mainland, Orkney

2019 ◽  
Vol 56 (1) ◽  
pp. 30-46 ◽  
Author(s):  
Ashley M. Abrook ◽  
Ian P. Matthews ◽  
Alice M. Milner ◽  
Ian Candy ◽  
Adrian P. Palmer ◽  
...  
Keyword(s):  
Early Career ◽  
Early Holocene ◽  
Content Type ◽  
Last Glacial ◽  
Principal Curve ◽  
Link Type ◽  
Supplementary Material ◽  
Career Research ◽  
The Last Glacial ◽  
Millennial Scale

The Last Glacial–Interglacial Transition (LGIT) is a period of climatic complexity where millennial-scale climatic reorganization led to changes in ecosystems. Alongside millennial-scale changes, centennial-scale climatic events have been observed within records from Greenland and continental Europe. The effects of these abrupt events on landscapes and environments are difficult to discern at present. This, in part, relates to low temporal resolutions attained by many studies and the sensitivity of palaeoenvironmental proxies to abrupt change. We present a high-resolution palynological and charcoal study of Quoyloo Meadow, Orkney and use the Principal Curve statistical method to assist in revealing biostratigraphic change. The LGIT vegetation succession on Orkney is presented as open grassland and Empetrum heath during the Windermere Interstadial and early Holocene, and open grassland with Artemisia during the Loch Lomond Stadial. However, a further three phases of ecological change, characterized by expansions of open ground flora, are dated to 14.05–13.63, 10.94–10.8 and 10.2 cal ka BP. The timing of these changes is constrained by cryptotephra of known age. The paper concludes by comparing Quoyloo Meadow with Crudale Meadow, Orkney, and suggests that both Windermere Interstadial records are incomplete and that fire is an important landscape control during the early Holocene.Supplementary material: All raw data associated with this publication: raw pollen counts, charcoal data, Principal Curve and Rate of Change outputs and the age-model output are available at https://doi.org/10.6084/m9.figshare.c.4725269Thematic collection: This article is part of the ‘Early Career Research’ available at: https://www.lyellcollection.org/cc/SJG-early-career-research

scholarly journals The naming of the Permian System

2021 ◽  
pp. jgs2021-037
Author(s):  
Michael J. Benton ◽  
Andrey G. Sennikov
Keyword(s):  
System Level ◽  
Naming Time ◽  
Content Type ◽  
Red Sandstone ◽  
Link Type ◽  
Permian System ◽  
Urgent Task ◽  
Great Leader ◽  
Supplementary Material ◽  
Access To Documents

The naming of the Permian by Roderick Murchison in 1841 is well known. This is partly because he ‘completed’ the stratigraphic column at system level, but also because of the exotic aspects of his extended fieldwork in remote parts of Russia and Murchison's reputed character. Here, we explore several debated and controversial aspects of this act, benefiting from access to documents and reports notably from Russian sources. Murchison or Sedgwick could have provided a name for the unnamed lower New Red Sandstone in 1835 based on British successions or those in Germany, so perhaps the Imperial aim of naming time from British geology was not the urgent task some have assumed. Murchison has been painted as arrogant and Imperialistic, which was doubtless true, but at the time many saw him as a great leader, even an attractive individual. Others suggest he succeeded because he stood on the shoulders of local geologists; however, his abilities at brilliant and rapid geological synthesis are undoubted. Two unexpected consequences of his work are that this arch conservative is revered in Russia as a hero of geological endeavours, and, for all his bombast, his ‘Permian’ was not widely accepted until 100 years after its naming.Supplementary material:https://doi.org/10.6084/m9.figshare.c.5412079

scholarly journals Dating protracted fault activities: microstructures, microchemistry and geochronology of the Vaikrita Thrust, Main Central Thrust zone, Garhwal Himalaya, NW India

2018 ◽  
Vol 481 (1) ◽  
pp. 127-146 ◽  
Author(s):  
Chiara Montemagni ◽  
Chiara Montomoli ◽  
Salvatore Iaccarino ◽  
Rodolfo Carosi ◽  
Arvind K. Jain ◽  
...  
Keyword(s):  
Electron Microprobe ◽  
Garhwal Himalaya ◽  
Main Central Thrust ◽  
Content Type ◽  
Mylonitic Foliation ◽  
Link Type ◽  
Thrust Zone ◽  
Supplementary Material ◽  
Structural Boundary

AbstractThe timing of shearing along the Vaikrita Thrust, the upper structural boundary of the Main Central Thrust Zone in the Garhwal Himalaya, was constrained by combined microstructural, microchemical and geochronological investigations. Three different biotite–muscovite growth and recrystallization episodes were observed: a relict mica-1; mica-2 along the main mylonitic foliation; and mica-3 in coronitic structures around garnet during its breakdown. Electron microprobe analyses of biotite showed chloritization and a bimodal composition of biotite-2 in one sample. Muscovite-2 and muscovite-3 differed in composition from each other. Biotite and muscovite 39Ar–40Ar age spectra from all samples showed both inter- and intra-sample discrepancies. Biotite step-ages ranged between 8.6 and 16 Ma and muscovite step-ages between 3.6 and 7.8 Ma. These ages cannot be interpreted as ‘cooling ages’ because samples from the same outcrop cooled simultaneously. Instead, the Ar systematics reflect sample-specific recrystallization markers. Intergrown impurities were diagnosed by the Ca/K ratios. The age data of biotite were interpreted as a mixture of true biotite-2 (9.00 ± 0.10 Ma) and two alteration products. The negative Cl/K–age correlation identified a Cl-poor muscovite-2 (>7 Ma) and a Cl-rich, post-deformational, coronitic muscovite-3 grown at ≤5.88 ± 0.03 Ma. The Vaikrita Thrust was active at least from 9 to 6 Ma at c. 600°C; its movement had ended by 6 Ma.Supplementary material: Thermometric and 39Ar–40Ar data are available at https://doi.org/10.6084/m9.figshare.c.4069076

Palaeolatitudinal distribution of the Ediacaran macrobiota

2021 ◽  
pp. jgs2021-030
Author(s):  
Catherine E. Boddy ◽  
Emily G. Mitchell ◽  
Andrew Merdith ◽  
Alexander G. Liu
Keyword(s):  
Taxonomic Composition ◽  
Supplementary Information ◽  
Cambrian Explosion ◽  
Content Type ◽  
Link Type ◽  
Environmental Perturbations ◽  
Significant Difference ◽  
Evolutionary Trajectories ◽  
Cambrian Radiation ◽  
Supplementary Material

Macrofossils of the late Ediacaran Period (c. 579–539 Ma) document diverse, complex multicellular eukaryotes, including early animals, prior to the Cambrian radiation of metazoan phyla. To investigate the relationships between environmental perturbations, biotic responses and early metazoan evolutionary trajectories, it is vital to distinguish between evolutionary and ecological controls on the global distribution of Ediacaran macrofossils. The contributions of temporal, palaeoenvironmental and lithological factors in shaping the observed variations in assemblage taxonomic composition between Ediacaran macrofossil sites are widely discussed, but the role of palaeogeography remains ambiguous. Here we investigate the influence of palaeolatitude on the spatial distribution of Ediacaran macrobiota through the late Ediacaran Period using two leading palaeogeographical reconstructions. We find that overall generic diversity was distributed across all palaeolatitudes. Among specific groups, the distributions of candidate ‘Bilateral’ and Frondomorph taxa exhibit weakly statistically significant and statistically significant differences between low and high palaeolatitudes within our favoured palaeogeographical reconstruction, respectively, whereas Algal, Tubular, Soft-bodied and Biomineralizing taxa show no significant difference. The recognition of statistically significant palaeolatitudinal differences in the distribution of certain morphogroups highlights the importance of considering palaeolatitudinal influences when interrogating trends in Ediacaran taxon distributions.Supplementary material: Supplementary information, data and code are available at https://doi.org/10.6084/m9.figshare.c.5488945Thematic collection: This article is part of the Advances in the Cambrian Explosion collection available at: https://www.lyellcollection.org/cc/advances-cambrian-explosion

Diamondiferous lamproites of Ingashi field, Siberian craton

2021 ◽  
pp. SP513-2020-274
Author(s):  
S. I. Kostrovitsky ◽  
D. A. Yakovlev ◽  
I. S. Sharygin ◽  
D. P. Gladkochub ◽  
T. V. Donskaya ◽  
...  
Keyword(s):  
Trace Element ◽  
Siberian Craton ◽  
Major Elements ◽  
Primary Sources ◽  
Content Type ◽  
Link Type ◽  
Ultramafic Lamprophyre ◽  
Dating Methods ◽  
Supplementary Material

AbstractIngashi lamproite dykes are the only known primary sources of diamond in the Irkutsk district (Russia) and the only non-kimberlitic one in the Siberian craton. Ingashi lamproite field placed in Urik-Iya graben within Prisayan uplift of Siberian craton. Phlogopite-olivine lamproites contain olivine, talc, phlogopite, serpentine, chlorite, olivine, garnet, chromite, orthopyroxene, clinopyroxene as well as Sr-F-apatite, monazite, zircon, armolcolite, priderite, potassium Mg-arfvedsonite, Mn-ilmenite, Nb-rutile, and diamond. The only one ultramafic lamprophyre dyke is composed mainly of serpentinized olivine and phlogopite in the talc-carbonate groundmass and similar (to Ingashi lamproites) accessory assemblage with the same major elements compositions. Trace element and Sr-Nd isotopic relationships of the Ingashi lamproites are similar to classic lamproites. Different dating methods have provided the ages of lamproites: 1481 Ma (Ar-Ar phlogopite), 1268 Ma (Rb-Sr whole rock) and 300 Ma (U-Pb zircon). Ingashi lamproite ages are controversial and require additional study. Calculated pressure of 3.5 GPamax for clinopyroxenes indicating that lamproite magma originated deeper than 100 km. Cr-in-garnet barometer (Grutter et al., 2006) shows a 3.7-4.3 GPamin and derivation of Ingashi lamproites deeper than 120 km depth. Based on the range of typical cratonic geotherms and presence of diamonds, the Ingashi lamproite magma originated at a depth greater than 155 km.Supplementary material at https://doi.org/10.6084/m9.figshare.c.5493128

Lead, zinc and arsenic contamination of pit lake waters in the Zeida abandoned mine (High Moulouya, Morocco)

2021 ◽  
pp. geochem2021-009
Author(s):  
Lamiae EL ALAOUI ◽  
Abdelilah Dekayir ◽  
Mohammed Rouai ◽  
EL Mehdi Benyassine
Keyword(s):  
Organic Matter ◽  
Iron Oxides ◽  
Environmental Issues ◽  
Abandoned Mine ◽  
Equal Proportion ◽  
Pit Lake ◽  
Content Type ◽  
Link Type ◽  
Supplementary Material ◽  
Lake Waters

In the Zeida abandoned mine, pit lake waters exhibit alkaline pH and high conductivity. The concentrations of the total dissolved lead and zinc are very low due to their adsorption on clay minerals and iron oxyhydroxides. Conversely, arsenic concentrations in two lakes (ZL1 and ZA) exceeded WHO water quality guidelines. The As content is relatively high in ZL1 lake and exists mainly as As(V). In ZA lake, As(III) occurs in low concentration compared to the total dissolved arsenic, while dimethylarsenic acid [H2AsO2(CH3)2, DMA) prevails. This means that arsenic was methylated by organic matter produced by microorganisms such as chlorella. The sequential extraction of floor sediments in two lakes shows that the bioavailable arsenic contents change between the two lakes. In ZA lake, the sediments show high concentrations of lead and arsenic compared to ZL1 sediment since it is surrounded by mining waste tailings, which are rich in such chemical elements. An arsenic leaching test of ZA sediment shows that bioavailable arsenic is distributed in equal proportion between clay/carbonates, sulfide-organic matter, and iron oxides (HFO) phases, while in ZL1, most of the arsenic is linked to hydrous iron oxides (HFO).Thematic collection: This article is part of the Hydrochemistry related to exploration and environmental issues collection available at: https://www.lyellcollection.org/cc/hydrochemistry-related-to-exploration-and-environmental-issuesSupplementary material:https://doi.org/10.6084/m9.figshare.c.5545316

Sign in / Sign up

Export Citation Format

Share Document