Colorimetric Determination of Lithium Content in Electrodes of Lithium-Ion Batteries

2008 ◽  
Vol 155 (11) ◽  
pp. A862 ◽  
Author(s):  
Pascal Maire ◽  
Anna Evans ◽  
Hermann Kaiser ◽  
Werner Scheifele ◽  
Petr Novák
Keyword(s):  
Lithium Ion Batteries ◽  
Lithium Ion ◽  
Lithium Content ◽  
Colorimetric Determination

scholarly journals Design of a Test Platform for the Determination of Lithium-Ion Batteries State of Health

2018 ◽  
Vol 141 (2) ◽  
Author(s):  
Jules-Adrien Capitaine ◽  
Qing Wang
Keyword(s):  
Lithium Ion Batteries ◽  
Storage System ◽  
Lithium Ion ◽  
Energy Storage System ◽  
State Of Health ◽  
Battery Cell ◽  
Test Platform ◽  
Battery Energy ◽  
Novel Design

This paper presents a novel design for a test platform to determine the state of health (SOH) of lithium-ion batteries (LIBs). The SOH is a key parameter of a battery energy storage system and its estimation remains a challenging issue. The batteries that have been tested are 18,650 Li-ion cells as they are the most commonly used batteries on the market. The test platform design is detailed from the building of the charging and discharging circuitry to the software. Data acquired from the testing circuitry are stored and displayed in LabVIEW to obtain the charging and discharging curves. The resulting graphs are compared to the outcome predicted by the battery datasheets, to verify that the platform delivers coherent values. The SOH of the battery is then calculated using a Coulomb counting method in LabVIEW. The batteries will be discharged through various types of resistive circuits, and the differences in the resulting curves will be discussed. A single battery cell will also be tested over 30 cycles and the decrease in the SOH will be clearly identified.

scholarly journals Effect of Current Rate and Prior Cycling on the Coulombic Efficiency of a Lithium-Ion Battery

Batteries ◽  
2019 ◽  
Vol 5 (3) ◽  
pp. 57 ◽  
Author(s):  
Seyed Madani ◽  
Erik Schaltz ◽  
Søren Knudsen Kær
Keyword(s):  
Lithium Ion Batteries ◽  
Lithium Ion Battery ◽  
Coulombic Efficiency ◽  
Lithium Ion ◽  
Degradation Behavior ◽  
Battery Cell ◽  
The Third ◽  
Capacity Loss ◽  
Battery Cells

The determination of coulombic efficiency of the lithium-ion batteries can contribute to comprehend better their degradation behavior. In this research, the coulombic efficiency and capacity loss of three lithium-ion batteries at different current rates (C) were investigated. Two new battery cells were discharged and charged at 0.4 C and 0.8 C for twenty times to monitor the variations in the aging and coulombic efficiency of the battery cell. In addition, prior cycling was applied to the third battery cell which consist of charging and discharging with 0.2 C, 0.4 C, 0.6 C, and 0.8 C current rates and each of them twenty times. The coulombic efficiency of the new battery cells was compared with the cycled one. The experiments demonstrated that approximately all the charge that was stored in the battery cell was extracted out of the battery cell, even at the bigger charging and discharging currents. The average capacity loss rates for discharge and charge during 0.8 C were approximately 0.44% and 0.45% per cycle, correspondingly.

scholarly journals Design of a Test Platform for the Determination of Lithium-Ion Batteries State-of-Health

2018 ◽  
Author(s):  
Jules-Adrien Capitaine ◽  
Qing Wang
Keyword(s):  
Lithium Ion Batteries ◽  
Storage System ◽  
Lithium Ion ◽  
Energy Storage System ◽  
State Of Health ◽  
Battery Cell ◽  
Test Platform ◽  
Battery Energy ◽  
Novel Design

This paper presents a novel design for a test platform to determine the State of Health (SOH) of lithium-ion batteries. The SOH is a key parameter of a battery energy storage system and its estimation remains a challenging issue. The batteries that have been tested are 18650 li-ion cells as they are the most commonly used batteries on the market. The test platform design is detailed from the building of the charging and discharging circuitry to the software. Data acquired from the testing circuitry is stored and displayed in LabView to obtain charging and discharging curves. The resulting graphs are compared to the outcome predicted by the battery datasheets, to verify the platform delivers coherent values. The SOH of the battery is then calculated using a Coulomb Counting method in LabView. The batteries will be discharged through various types of resistive circuits, and the differences in the resulting curves will be discussed. A single battery cell will also be tested over 30 cycles and the decrease in the SOH will be clearly pointed out.

Recycling Process for Spent Cathode Materials of LiFePO4 Batteries

2019 ◽  
Vol 943 ◽  
pp. 141-148 ◽  
Author(s):  
Xiao Tong Jiang ◽  
Pan Wang ◽  
Long Hui Li ◽  
Jia Yu ◽  
Yu Xin Yin ◽  
...  
Keyword(s):  
High Temperature ◽  
Lithium Ion Batteries ◽  
Cathode Materials ◽  
Solid Phase ◽  
Specific Capacity ◽  
Lithium Ion ◽  
Carbon Layer ◽  
Lithium Content ◽  
Recycling Process ◽  
Gradual Loss

The cathode materials of LiFePO4 batteries decreases due to the gradual loss of lithium content during use. In this paper, the spent cathode materials were recycled with a carbon layer coated. The samples were prepared by a high temperature impurity removal procession and a solid phase repairing method. The LiFePO4 material obtained by the regeneration process has a discharge specific capacity of 105.4 mAh/g at 0.1 C after 10 cycles, and keeps it a considerable retention of 73.1 mAh/g at 1 C. This work provides a new routine in reusing lithium ion batteries.

Sign in / Sign up

Export Citation Format

Share Document