scholarly journals Corrosion Inhibition of Mild Steel in Acid Solution by 3,4,5-Trimethoxyphenyl-2-imidazolines

2011 ◽  
Vol 8 (2) ◽  
pp. 671-679 ◽  
Author(s):  
D. Nalini ◽  
R. Rajalakshmi ◽  
S. Subhashini
Keyword(s):  
Mild Steel ◽  
Corrosion Inhibition ◽  
Mixed Mode ◽  
Anodic Polarization ◽  
Inhibition Efficiency ◽  
Electrochemical Impedance ◽  
Langmuir Adsorption Isotherm ◽  
Sem Images ◽  
Acid Media ◽  
Langmuir Adsorption

A heterocyclic imidazoline, 3,4,5-trimethoxyphenyl-2-imidazolines (TMP2I) was tested for its corrosion inhibition in 0.5 M H2SO4and 1 M HCl using weight loss, Tafel polarisation and electrochemical impedance techniques. The results show that the inhibition efficiency increases with the increase in concentration of TMP2I and the higher efficiency of about 98% is obtained in both the acid media at 20 ppm. The adsorption of TMP2I obeys Langmuir adsorption isotherm and occurs spontaneously. Cathodic and anodic polarization curves of mild steel in the presence of different concentrations of TMP2I at 300C reveal that it is a mixed type of inhibitor. Electrochemical impedance studies reveal that the system follows mixed mode of inhibition. The surface morphology of the mild steel specimens was evaluated using SEM images

scholarly journals Corrosion Inhibition of Mild Steel in Acidic Media by N-[(3,4-Dimethoxyphenyl)Methyleneamino]-4-Hydroxy-Benzamide

2020 ◽  
Vol 7 (1) ◽  
Author(s):  
Kashmitha Muthamma ◽  
Preethi Kumari ◽  
M. Lavanya ◽  
Suma A. Rao
Keyword(s):  
Dft Calculations ◽  
Mild Steel ◽  
Corrosion Inhibition ◽  
Density Functional ◽  
Surface Characterization ◽  
Inhibition Efficiency ◽  
Electrochemical Impedance ◽  
Corrosion Behaviour ◽  
Low Carbon ◽  
Acid Media

Abstract Mild steel (a low carbon steel) is an affordable engineering material used for many purposes in various environments including mild acidic environment with some precautions. The corrosion behaviour of mild steel (MS) in 0.5 M H2SO4 and 0.5 M HCl, in the temperature range (303–323 K) without and with the inhibitor N-[(3,4-dimethoxyphenyl) methyleneamino]-4-hydroxy-benzamide (DMHB), was investigated using Potentiodynamic polarization and Electrochemical impedance spectroscopy (EIS) techniques supplementing with surface characterization study using scanning electron microscope (SEM) and atomic force spectroscopy (AFM). Experimental observations were found to be in agreement with Density functional theory (DFT) calculations. The inhibition efficiency increases with increase in DMHB concentration and showed maximum inhibition efficiency of 86% in 0.5 M H2SO4 and 81% in 0.5 M HCl, respectively, at concentration of 3 × 10─3 M at 303 K. The inhibition efficiency of DMHB obtained relatively at its lower concentration (3 × 10─3 M) compared to other reported related compounds confirms its potential towards corrosion inhibition. The variation in the kinetic and thermodynamic parameters indicated physisorption of DMHB on MS and its mixed type inhibitive action followed Langmuir’s isotherm model. DFT calculations go along with the experimental results, signifying the potential corrosion inhibition behaviour of DMHB for MS in both the acid media.

Corrosion Inhibition of Mild Steel in 0.5N H2SO4 Solution by Tribulus terrestris (fruit) Extract

2017 ◽  
Vol 33 (1-2) ◽  
pp. 63
Author(s):  
Suchitra Chaudhary ◽  
Rakesh K. Tak ◽  
Rajendra Kumar Duchaniya
Keyword(s):  
Mild Steel ◽  
Corrosion Inhibition ◽  
Inhibition Efficiency ◽  
Adsorption Process ◽  
Electrochemical Impedance ◽  
Tribulus Terrestris ◽  
Alcoholic Extract ◽  
Fruit Extract ◽  
Langmuir Adsorption ◽  
Corrosion Inhibition Efficiency

The corrosion inhibition efficiency of alcoholic extract of fruits of plant <em>Tribulus terrestris</em> for mild steel in 0.5N H<sub>2</sub>SO<sub>4</sub> solution has been studied in relation to concentration of inhibitor by Mass Loss, Potentiodynamic Polarisation and Electrochemical Impedance Spectroscopy methods. The results indicate that <em>Tribulus terrestris</em> fruit extract used in liquid H<sub>2</sub>SO<sub>4</sub> effectively reduces the corrosion rate of mild steel and act as a good corrosion inhibitor. It is also observed that inhibition efficiency increases with inhibitor concentration but it decreases with increase in temperature. The thermodynamic parameters reveal that the inhibition of corrosion is due to adsorption of the inhibitor on the metal surface. The negative free energy values show spontaneity of the adsorption process in accordance with Langmuir adsorption isotherm.

scholarly journals Corrosion inhibition of mild steel by N, N’-(5,5- dimethylcyclohexane-1,3-diylidene)dianiline in acid media: Gravimetric and electrochemical evaluations

2021 ◽  
pp. 67-80
Author(s):  
K. Ragi ◽  
Joby Thomas Kakkassery ◽  
Vinod P. Raphael ◽  
Binsi M. Paulson ◽  
Reeja Johnson
Keyword(s):  
Schiff Base ◽  
Mild Steel ◽  
Corrosion Inhibition ◽  
Inhibition Efficiency ◽  
Electrochemical Noise ◽  
Electrochemical Impedance ◽  
Sem Analysis ◽  
Metal Dissolution ◽  
Acid Media ◽  
Corrosion Inhibition Efficiency

The corrosion inhibition efficiency of the Schiff base N,N’-(5,5-dimethylcyclohexane-1,3-diylidene)dianiline (DmChDa) on mild steel in 1M HCl and 0.5M H2SO4 was evaluated using gravimetric, electrochemical impedance spectroscopy, potentiodynamic polarization and electrochemical noise measurement. Experimental results established that DmChDa possess relatively high corrosion inhibition capacity. Langmuir and El-Awady adsorption isotherms were obeyed by the Schiff base in 1M HCl and 0.5M H2SO4 respectively. SEM analysis showed that DmChDa was adsorbed on the steel surface during corrosion inhibition. The variation of metal dissolution with temperature was also examined using gravimetric study.

Adsorption and Inhibitive Properties of 1-phenylaminomethyl-benzimidazole on Corrosion of Mild Steel in Hydrochloric Acid

2014 ◽  
Vol 989-994 ◽  
pp. 536-539 ◽  
Author(s):  
Tie Jun Su ◽  
Ke Hua Li
Keyword(s):  
Hydrochloric Acid ◽  
Adsorption Isotherm ◽  
Mild Steel ◽  
Corrosion Inhibition ◽  
Potentiodynamic Polarization ◽  
Steel Surface ◽  
Inhibition Efficiency ◽  
Langmuir Adsorption Isotherm ◽  
Mild Steel Surface ◽  
Langmuir Adsorption

The corrosion inhibition of mild steel in 5.0 M HCl by 1–phenylaminomethyl-benzimidazo -le (PMB) was studied by gravimetric and potentiodynamic polarization methods. Inhibition efficiency of PMB increased with increase in the concentration of inhibitor and decreased with the increase in temperature. PMB acts as anodic-type inhibitor for mild steel. The adsorption of PMB on mild steel surface obeys the Langmuir adsorption isotherm.

scholarly journals Corrosion Inhibition Effect of 4-Hydroxy-N′-[(E)-(1H-indole-2-ylmethylidene)] Benzohydrazide on Mild Steel in Hydrochloric Acid Solution

2014 ◽  
Vol 2014 ◽  
pp. 1-11 ◽  
Author(s):  
Preethi Kumari ◽  
Prakash Shetty ◽  
Suma A. Rao
Keyword(s):  
Hydrochloric Acid ◽  
Acid Solution ◽  
Mild Steel ◽  
Corrosion Inhibition ◽  
Hydrochloric Acid Solution ◽  
Inhibition Efficiency ◽  
Electrochemical Impedance ◽  
Langmuir Adsorption ◽  
Solution Interface ◽  
Inhibition Performance

The inhibition performance and adsorption behaviour of 4-hydroxy-N′-[(E)-(1H-indole-2-ylmethylidene)] benzohydrazide (HIBH) on mild steel in 1 M HCl solution were tested by potentiodynamic polarization and electrochemical impedance spectroscopy (EIS). The inhibition efficiency of HIBH increases with increase in inhibitor concentration in the temperature range 30–60°C. Polarisation curves indicate that HIBH is a mixed inhibitor, affecting both cathodic and anodic corrosion currents. The adsorption process of HIBH at the mild steel/hydrochloric acid solution interface obeyed Langmuir adsorption isotherm model and inhibition takes place by mixed adsorption, predominantly chemisorption. The activation and thermodynamic parameters for the corrosion inhibition process were calculated to elaborate the mechanism of corrosion inhibition.

scholarly journals Spilanthes acmella Leaves Extract for Corrosion Inhibition in Acid Medium

Coatings ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 106
Author(s):  
Akbar Ali Samsath Begum ◽  
Raja Mohamed Abdul Vahith ◽  
Vijay Kotra ◽  
Mohammed Rafi Shaik ◽  
Abdelatty Abdelgawad ◽  
...  
Keyword(s):  
Mild Steel ◽  
Corrosion Inhibition ◽  
Active Sites ◽  
Inhibition Efficiency ◽  
Electrochemical Impedance ◽  
Film Formation ◽  
Protective Film ◽  
Surface Protection ◽  
Tafel Polarization ◽  
Spilanthes Acmella

In the present study, the corrosion inhibition effect of Spilanthes acmella aqueous leaves extract (SA-LE) on mild steel was investigated in 1.0 M HCl solution at different temperature using weight loss, Tafel polarization, linear polarization resistance (LPR), and electrochemical impedance (EIS) measurements. Adsorption of inhibitor on the surface of the mild steel obeyed both Langmuir and Temkin adsorption isotherms. The thermodynamic and kinetic parameters were also calculated to determine the mechanism of corrosion inhibition. The inhibition efficiency was found to increase with an increase in the inhibitor concentration i.e., Spilanthes acmella aqueous leaves extract, however, the inhibition efficiency decreased with an increase in the temperature. The phytochemical constituents with functional groups including electronegative hetero atoms such as N, O, and S in the extract adsorbed on the metal surface are found responsible for the effective performance of the inhibitor, which was confirmed by Fourier-transform infrared spectroscopy (FT-IR) and ultraviolet–visible spectroscopic (UV-Vis) studies. Protective film formation against corrosion was confirmed by scanning electron microscopy (SEM), atomic force microscopy (AFM), and contact angle studies. The result shows that the leaves extract acts as corrosion inhibitor and is able to promote surface protection by blocking active sites on the metal.

scholarly journals Newly Synthesized N-Substituted Thiosemicarbazone as a Potential Corrosion Inhibitor for Mild Steel in 1 M HCl

2019 ◽  
Vol 7 (4.14) ◽  
pp. 168
Author(s):  
N Z. Nor Hashim ◽  
K Kassim ◽  
F H. Zaidon
Keyword(s):  
Mild Steel ◽  
Corrosion Inhibitor ◽  
Potentiodynamic Polarization ◽  
Corrosion Inhibitors ◽  
Inhibition Efficiency ◽  
Electrochemical Impedance ◽  
Langmuir Adsorption ◽  
Before And After ◽  
Ft Ir ◽  
L1 And L2

Two N-substituted thiosemicarbazone derivatives namely as 2-(4-chlorobenzylidene)-N-phenylhydrazinecarbothioamide and 2-benzylidene-N-phenylhydrazinecarbothioamide (L1 and L2, respectively) have been tested as corrosion inhibitors on mild steel in 1 M HCl. The ligands were synthesized and investigated using potentiodynamic polarization (PD) and electrochemical impedance spectroscopy (EIS).  The obtained results indicated that inhibition efficiency, (IE, %) L1 increased with increasing inhibitor concentrations which behaved as a good corrosion inhibitor compared to L2. The synthesized ligands were successfully characterized by melting point, elemental analysis (C, H, N, and S), Fourier-transform infrared spectroscopy (FT-IR) and NMR (1H and 13C) spectroscopy. The excellent inhibition effectiveness for both compounds on mild steel before and after immersion in 1 M HCl solution containing 40 ppm of L1 and L2 were also verified by scanning electron microscope (SEM). Based on potentiodynamic polarization results, it can be concluded that all investigated compounds are mixed-type inhibitors and obey the Langmuir adsorption isotherm. 

scholarly journals Inhibition Effect of Miconazole Nitrate on the Corrosion of Mild Steel in Hydrochloric Acid Medium

2011 ◽  
Vol 2011 ◽  
pp. 1-8 ◽  
Author(s):  
J. Ishwara Bhat ◽  
Vijaya D. P. Alva
Keyword(s):  
Hydrochloric Acid ◽  
Mild Steel ◽  
Acid Medium ◽  
Inhibition Efficiency ◽  
Electrochemical Impedance ◽  
Inhibitor Molecule ◽  
Langmuir Adsorption ◽  
Hydrochloric Acid Medium ◽  
Miconazole Nitrate ◽  
Impedance Spectroscopy Technique

The corrosion inhibition of mild steel by miconazole nitrate, an antifungal drug has been investigated using potentiodynamic polarization, electrochemical impedance spectroscopy technique, and weight loss methods. The experimental results suggested miconazole nitrate is a good corrosion inhibitor for mild steel in 1 M hydrochloric acid medium. The inhibition efficiency increased with increase in inhibitor concentration. The thermodynamic parameters were determined and discussed. The inhibition was assumed to occur via adsorption of the inhibitor molecule on the surface of mild steel following Langmuir adsorption isotherm.

THEORETICAL AND EXPERIMENTAL STUDIES OF CORROSION INHIBITION OF THIOHENE-2-ETHYLAMINE ON MILD STEEL IN ACID MEDIA

2015 ◽  
Vol 76 (13) ◽  
Author(s):  
Bishir Usman ◽  
Hasmerya Maarof ◽  
Hassan H. Abdallah ◽  
Rosmahida Jamaludin ◽  
Mohamed Noor Hasan ◽  
...  
Keyword(s):  
Mild Steel ◽  
Corrosion Inhibition ◽  
Metal Surface ◽  
Electrochemical Impedance ◽  
Experimental Studies ◽  
Qsar Model ◽  
Acid Media ◽  
Structure Activity ◽  
C And N ◽  
Quantitative Structure Activity Relation

Corrosion inhibition of mild steel in 0.5M H2SO4 at 30oC with thiophene-2- ethylamine (TEA) as inhibitor has been assess by quantitative structure activity relation (QSAR) model and quantum chemical calculations. The results were evaluated using weight loss and electrochemical methods such as potentiodynamic polarization (PDP) and electrochemical impedance spectroscopy (EIS). The results showed good performance of TEA in corrosion protection which behaves as mixed inhibitor from PDP. The micrograph from FESEM and EDX dot mapping showed that the inhibitor adsorbed onto the metal surface with different distribution for S, C and N atoms which indicate less damage on the metal surface in the presence of TEA.

scholarly journals 3-Formylindole-4-aminobenzoic Acid: A Potential Corrosion Inhibitor for Mild Steel and Copper in Hydrochloric Acid Media

2012 ◽  
Vol 2012 ◽  
pp. 1-9 ◽  
Author(s):  
Aby Paul ◽  
Joby Thomas K. ◽  
Vinod P. Raphael ◽  
K. S. Shaju
Keyword(s):  
Mild Steel ◽  
Electrochemical Impedance ◽  
Aminobenzoic Acid ◽  
Acid Media ◽  
Langmuir Adsorption ◽  
Low Concentrations ◽  
Polarization Studies ◽  
Hydrochloric Acid Media ◽  
Hcl Medium ◽  
Mixed Type Inhibitor

The corrosion inhibition efficiencies of Schiff base 3-formylindole-4-aminobenzoic acid (3FI4ABA) on mild steel (MS) and copper in 1.0 M HCl solution have been investigated using weight loss measurements, electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization studies. The results show that inhibition efficiencies on both metals increase with increasing the concentration of the inhibitor. 3FI4ABA exhibited comparatively good inhibition towards mild steel in HCl medium even at low concentrations. The adsorption of inhibitor on the surfaces of the corroding metal mild steel and copper obeys the Langmuir isotherm. Polarization studies revealed that 3FI4ABA acts as a mixed-type inhibitor. Thermodynamic parameters (, ) were calculated using the Langmuir adsorption isotherm.

Sign in / Sign up

Export Citation Format

Share Document