scholarly journals Excess Transport Properties of Binary Mixtures of Quinoline with Xylenes at Different Temperatures

2012 ◽  
Vol 2012 ◽  
pp. 1-9 ◽  
Author(s):  
Sk. Fakruddin ◽  
Ch. Srinivasu ◽  
B. R. Venkateswara Rao ◽  
K. Narendra

The ultrasonic velocity and density of binary liquid mixtures of quinoline with o-xylene, m-xylene, and p-xylene have been measured over the entire range of composition at = 303.15, 308.15, 313.15, and 318.15 K. Using these data, various parameters like adiabatic compressibility (β), intermolecular free length (), and acoustic impedance () and some excess parameters like excess adiabatic compressibility (), excess intermolecular free length (), excess acoustic impedance (), and excess ultrasonic velocity () have been calculated for all the three mixtures. The calculated deviations and excess functions have been fitted to Redlich-Kister polynomial equation. The observed deviations have been explained on the basis of the intermolecular interactions present in these mixtures.

Author(s):  
S.L. Dahire ◽  
Y.C. Morey ◽  
P.S. Agrawal

The present study reports densities (ρ), viscosities (η) and ultrasonic speeds (U) of pure dioxane (DOX), anisole (ANS), toluene (TOL) and ethylbenzene (ETB) and their binary liquid mixtures over the entire composition range at 293, 298, 303, 308 and 313 K. From the experimental data excess molar volume (VmE), excess intermolecular free length (LfE), excess adiabatic compressibility (βE) and excess acoustic impedance (ZE) have been computed. The excess values were correlated using Redlitch-Kister polynomial equation to obtain their coefficients and standard deviations (σ). With increase in temperature, the binary mixture of DOX+ANS shows larger deviations in βE, LfE and smaller deviations in ZE, VmE. These results suggest that ANS has strong molecular interactions with DOX than ETB and TOL.


Author(s):  
Baljeet Singh Patial

Ultrasonic velocity, viscosity and density studies on solution of tetrapentylammonium bromide (Pen4NBr) in N,N-dimethylformamide, ethylmethylketone (EMK) and DMF-EMK solvent mixtures containing 0, 20, 40, 60, 80 and 100 mol % of DMF at 298, 308 and 318K have been reported. From the velocity, viscosity and density data values, various parameters namely, the adiabatic compressibility (β), Intermolecular free length (Lf), specific acoustic impedance (Z), free volume (Vf), internal pressure (πi) and relaxation time (τ) have been calculated. All these parameters have been discussed separately to throw light on the solute-solvent and solvent-solvent interactions.


Ultrasonic speed, density and viscosity of binary liquid mixtures of aqueous ammonium per sulphate with other sulphate solutions at 303.15 K have been measured. From these experimental data, the adiabatic compressibility, intermolecular free length, internal pressure, acoustic impedance, relaxation time, molar volume, classical absorption coefficient and surface tension have been computed. The excess viscosity, excess compressibility, excess intermolecular free length, excess acoustic impedance and excess molar volume values are evaluated to find the nature and the extent of the interactions between the constituent molecules of the liquid mixture systems


2020 ◽  
Vol 10 ◽  
Author(s):  
Bhavi Patel ◽  
Bhavya Salvi ◽  
Vivekanand Mishra ◽  
Ritesh Yadav

Background: The Binary mixtures of the isopropanol/isobutanol/isoamylalcohol with equimolar mixture of ethanol and formamide consists of different ultrasonic properties have been studied at room temperature at a fixed frequency of 2 MHz. The ultrasonic related physical parameters like velocity (U), density (ρ), adiabatic compressibility (βad), intermolecular free length (Lf) ,acoustic impedance (Z) etc. have been studied. The theoretical evaluation of ultrasonic velocity in liquid mixtures offers a transparent method for the study of the nature of molecular interactions in the mixtures besides verifying the applicability of different theories such as Nomoto’s, Van Dael and Vangeel’s, Impedance Dependence relation, Junjie’s relation, Rao’s specific sound velocity relation and Jacobson’s relations, Percentage deviations of theoretical ultrasonic velocities from experimental values in the mixtures of all liquid mixture and also calculated values of ultrasonic velocity from polynomials of for all the schemes with mole fraction (x) of isopropanol/isobutanol/isoamyl alcohol. Objective: The main focus of the present work was to prepare the structural changes associated with the liquid mixtures having weakly interacting components as well as strongly interacting components. The study of molecular is association in mixtures having exact information of thermodynamic mixing properties such as adiabatic compressibility, intermolecular free length, free volume, internal pressure and molar volume and has a great importance in theoretical and applied areas of research. The ultrasonic study has been a subject of active interest during the past many years. This branch of physical sciences has played a great role in deciding the interactions between the molecules of compounds under study not only that, but also it exists a potential tool in evaluating energy exchange between various degrees of freedom and nonlinear properties in binary liquid mixtures. Methods: The binary liquid mixtures were prepared by mixing the two components, by weight, using an electronic analytical balance (Reptech RA2012) accurate to within ±0.0001 g. The average uncertainty in mole fraction of binary mixtures was estimated to be ±0.0001. To avoid losses of solvent due to evaporation, mixtures were stored in specially designed ground-glass airtight ampoules and placed in a dark place to avoid photolytic effects. Results: These empirical fittings of data are described qualitatively and quantitatively using experimental speed data even in the specific interaction predominant region where non-ideal behavior of the mixture is observed. The values of sound velocities and percentage deviation, (after determining the co-efficient in the polynomial equations by applying least squares method) have been compiled in the tables respectively. Conclusion: The ultrasonic velocities and densities for all the three mixtures are measured and the values of are calculated from these values.The observed trends of and indicate the presence of weak interactions and the strength of these interactions follow the order EMM+IPA>EMM+IBA>EMM+IAA. Besides, the ultrasonic velocities gauge from different velocity theories are correlated with the experimentally measured ultrasonic velocities. Among these theories the Jacobson’s velocity equation gives good result between the experimental and theoretical ultrasonic velocity values for all the binary mixtures occupied.


2021 ◽  
Vol 16 (2) ◽  
Author(s):  
Richa Saxena ◽  
SC Bhatt ◽  
Manish Uniyal ◽  
S C Nautiyal

Ultrasonic velocity, density, and viscosity of polyethylene glycol have been measured for the solution in water at concentration range of 0.3% to 1% at temperature 50oC. Ultrasonic velocity has been measured using ultrasonic interferometer at 1MHz frequency. By using the values of ultrasonic velocity, density, and viscosity, various acoustical parameters like adiabatic compressibility, acoustic impedance, intermolecular free length, and relaxation time have been calculated. The change in these acoustical parameters is explained in terms of solutesolvent interaction in a polymer solution.


Author(s):  
Baljeet Singh Patial

Ultrasonic velocities (u), densities (ρ) and viscosities (η) are measured in respect of ethylmethylketone (EMK) and N,N-dimethylformamide (DMF) over the entire composition at 298, 308and 318K. Attempt have been made to extract the information with respect to various kind of intermolecular interactions, such as H-bonding, dipole-dipole, solute –solvent, dispersion type interactions existing between these two components from the following acoustical parameter when examined as a function of solvent composition at different temperatures: adiabatic compressibility (β), specific acoustic impedance (Z), intermolecular free length (Lf), molar sound velocity (Rm), wada’s constant (W), viscous relaxation time (τ), free volume and internal pressure (πi).


2021 ◽  
Vol 33 (2) ◽  
pp. 5-11
Author(s):  
NEERAJ RATHORE ◽  
◽  
AJAY KUMAR SINGH ◽  

Density, viscosity and ultrasonic velocity of the various compositions of liquid mixtures of aqueous solutions of Lithium chloride (LiCl) and Lithium hydroxide (LiOH) have been experimentally measured at 303,308,313 and 318K and at atmospheric pressure. From these experimental measurements the acoustic impedance (Z) and adiabatic compressibility (ad) have been calculated. The variations in these parameters have been correlated to derive the intermolecular interactions taking place between the mixtures of present study.


2015 ◽  
Vol 1086 ◽  
pp. 107-110
Author(s):  
B. Rohini ◽  
Solomon Jeevaraj A. Kingson

Ultrasonic parameters of CuO: Diethylamine-Isopropaonol binary nanofluids at six different concentrations have been reported at three different temperatures like 298K, 308K and 318K. The acoustical parameters such as Ultrasonic sound velocity (v), Compressibility (β), Inter molecular free length (Lf), Acoustic impedance (Z) are calculated from experimental data. The variation of these parameters with composition of the mixture helps us in understanding the nature and extent of interaction between particles and the binary liquid mixtures.KeywordsUltrasonic velocity, Compressibility, Acoustic impedance, Inter molecular free length, Nanofluids


Sign in / Sign up

Export Citation Format

Share Document