scholarly journals Resonance Fluorescence of Fused Silica by the Depopulation of the Ground State

2012 ◽  
Vol 2012 ◽  
pp. 1-3 ◽  
Author(s):  
Fuat Bayrakceken ◽  
Korkut Yegin
Keyword(s):  
Silicon Dioxide ◽  
Optical Fibers ◽  
Laser Flash ◽  
Fused Silica ◽  
Photon Flux ◽  
Pulse Excitation ◽  
Resonance Fluorescence ◽  
Photon Pulse ◽  
Fluorescence Line ◽  
Flash Spectroscopy

Spectroscopically pure fused silica has been used in many applications ranging from optoelectronics and optical fibers to laser flash spectroscopy. Although ultraviolet light irradiated optical absorption spectra and coherence fluorescence of silicon dioxide have been studied in the past, we present discrete absorption and resonance coherent fluorescence line of silicon dioxide which were recorded photographically at 288.2 nm. This discrete fluorescence is observed at room temperature using high photon flux (1024photon/pulse) excitation spectroscopy.

Mechanical Properties of SiO2 vs. SiO2-TiO2 Bulk Glasses and Fibers

1991 ◽  
Vol 244 ◽  
Author(s):  
Suresh T. Gulati
Keyword(s):  
Mechanical Properties ◽  
Optical Fibers ◽  
Mechanical Performance ◽  
Fatigue Behavior ◽  
Deformation Mode ◽  
Strength Distribution ◽  
Fused Silica ◽  
Space Applications ◽  
Silica Glasses ◽  
Silica And Titania

ABSTRACTThe mechanical properties of silica and titania-doped silica glasses, in bulk and fiber forms, are presented. These include the elastic properties (E and ν), strength distribution (in tension and bending), fatigue behavior (dynamic and static loading) and fracture toughness. Following a brief review of above properties for fused silica and ULE™ glasses (Coming Codes 7940 and 7971), used primarily for space applications, the mechanical properties data for silica and titania-doped silica-clad optical fibers are presented. The enhancement of mechanical performance of titania-doped silica clad fiber is also discussed.The effect of titania doping on fundamental properties like stress-free activation energy, crack tip pH, and deformation mode of Si-O-Si bond is discussed. In addition, the crack velocity data obtained from DCDC specimens of homogeneous silica and titania-doped silica glasses are compared in an attempt to understand the role titania plays in improving the fatigue resistance of optical fibers.

scholarly journals Fabrication of Polyimide Optical Waveguide on Silicon Dioxide Layer Stacked Silicon Substrate

2017 ◽  
Vol 17 (2) ◽  
pp. 36
Author(s):  
Dadin Mahmudin ◽  
Shobih ◽  
Pamungkas Daud ◽  
Yusuf Nur Wijayanto
Keyword(s):  
Silicon Dioxide ◽  
Optical Fibers ◽  
Silicon Substrate ◽  
Optical Waveguides ◽  
Ultra Violet ◽  
Long Distance ◽  
Distance Communication ◽  
Paper Fabrication ◽  
Insertion Losses ◽  
Planar Optical Waveguides

Optical waveguides are important for guiding lightwave from a place to other places. Propagation and insertion losses of the optical waveguides should be considered to be in low values. Recently, optical waveguides with circular structures, which are optical fibers, are used widely for guiding lightwave in long-distance optical communication with very low propagation and insertion losses. Simultaneously, optical waveguides with planar structure are also developed for short distance communication in optical devices. We have reported design and analysis of the planar optical waveguides. In this paper, fabrication of planar optical waveguides using a polyimide material on thin silicon dioxide combined with the silicon substrate is reported. The polyimide material is used for the core of the optical waveguides. The silicon dioxide located on the silicon substrate and the air is used for cladding of the optical waveguides. Fabrication of the optical waveguides such as oxidation, photoresist coating, masking, ultra-violet exposure, and etching was done. The fabricated optical waveguides were characterized physically using a standard microscope and scanning electron microscope (SEM). The fabrication processes and characterization results are reported and discussed in detail.

A Step-Index Multimode Fiber-Optic Microbend Displacement Sensor Wavelength Dependent Loss

2019 ◽  
pp. 47-60
Author(s):  
Sami D. Alaruri
Keyword(s):  
Optical Fibers ◽  
Fiber Optic ◽  
Transmission Loss ◽  
Wavelength Dependence ◽  
Fiber Optic Sensors ◽  
Fused Silica ◽  
Displacement Sensor ◽  
Sensor Output ◽  
Core Diameter ◽  
Step Index

In this chapter, the wavelength dependence of bend loss in a step-index multimode optical fiber (100 µm core diameter; fused silica) was investigated for fiber bend radii ranging between 2.0 and 4.5 mm using six laser excitation wavelengths, namely, 337.1, 470, 590, 632.8, 750, and 810 nm. The results obtained from fitting the bend loss measurements to Kao's model and utilizing MATLAB® indicate that bend loss is wavelength dependent and transmission loss in multimode optical fibers increases with the decrease in the fiber bend radius. Furthermore, the response of a microbend fiber-optic displacement sensor was characterized at 337.1, 470, 632.8, 750, and 810 nm. Measurements obtained from the microbend sensor indicate that the sensor output power is linear with the applied displacement and the sensor output is wavelength dependent. Lastly, references for industrial and biomedical applications of microbend fiber-optic sensors are provided. Finally, a brief description for the transmission loss mechanisms in optical fibers is given.

LASER FLASH SPECTROSCOPY OF METHYLENE BLUE WITH NUCLEIC ACIDS

1987 ◽  
Vol 45 (2) ◽  
pp. 167-175 ◽  
Author(s):  
John M. Kelly ◽  
Wilhelm J. M. Putten ◽  
David J. Mcconnell
Keyword(s):  
Methylene Blue ◽  
Nucleic Acids ◽  
Laser Flash ◽  
Flash Spectroscopy
Sign in / Sign up

Export Citation Format

Share Document