scholarly journals Mg(II) Selective PVC Membrane Electrode Based on Methyl Phenyl Semicarbazone as an Ionophore

2013 ◽  
Vol 2013 ◽  
pp. 1-7 ◽  
Author(s):  
Sulekh Chandra ◽  
Kusum Sharma ◽  
Adarsh Kumar
Keyword(s):  
High Sensitivity ◽  
Fast Response ◽  
Pvc Membrane ◽  
Indicator Electrode ◽  
Membrane Electrode ◽  
Trivalent Cation ◽  
Selective Electrode ◽  
Pvc Membrane Electrode ◽  
Ph Range ◽  
Methyl Phenyl

A PVC-membrane-based Mg(II) selective electrode was constructed using methyl phenyl semicarbazone (MPS) as a neutral carrier. The sensor exhibits a Nernstian response for Mg(II) ion over a wide concentration range1.0×10-8  to  1.0×10-1 M with the slope of 28.4 mV/per decade having detection limit1.7×10-9 M. It was relatively a fast response time (<10 s for concentration≥1.0×10-3and<15 s for concentration of≥1.0×10-6 M) and can be used for 8 months without any considerable divergence in potentials. The proposed sensor revealed relatively good selectivity and high sensitivity for Mg(II) over a mono-, di-, and trivalent cation and can be used in a pH range of 1.0–9.5. It was also successfully used as an indicator electrode in potentiometer titration and in the analysis of concentration of magnesium in various real samples.

scholarly journals Tin(II) Selective PVC Membrane Electrode Based on Salicylaldehyde Thiosemicarbazone as an Ionophore

2013 ◽  
Vol 2013 ◽  
pp. 1-5
Author(s):  
Sulekh Chandra ◽  
Kusum Sharma ◽  
Adarsh Kumar
Keyword(s):  
High Sensitivity ◽  
Fast Response ◽  
Polymeric Membrane ◽  
Pvc Membrane ◽  
Membrane Electrode ◽  
Membrane Composition ◽  
Pvc Membrane Electrode ◽  
Trivalent Cations ◽  
Nernstian Slope ◽  
Ph Range

A polymeric membrane-based tin selective electrode was developed by using salicylaldehyde thiosemicarbazone (STSC). The best performance was recorded with a membrane composition of PVC : TBP : ionophore : NaTPB as 28 : 59 : 8 : 5 (w/w%). The Nernstian slope calculated from the calibration curve for Sn2+sensor was28.8±0.4 mV/decade. The detection limit of the sensor was2.10×10−8 M, in the linear concentration range of1.0×10−2−1.1×10−7 M. It was relatively fast response time (<8 s for concentration≥1.0×10−4and <12 s for concentration of≥1.0×10−6 M) and can be used for 9 months without any considerable divergence in potentials. The proposed sensor exhibit relatively good selectivity and high sensitivity for tin(II) as other mono-, di-, and trivalent cations and can be used in a pH range of 2.0–8.5. The analytical usefulness of the proposed electrode has been evaluated by its application in the determination of stannous in artificially made samples.

Manganese(II)-ion-selective electrode based on 2,2′-bis(salicylideneamino)azobenzene incorporated in poly(vinyl chloride) matrix

2009 ◽  
Vol 74 (9) ◽  
pp. 1411-1424 ◽  
Author(s):  
Mohammad Bagher Gholivand ◽  
Maryam Gorji ◽  
Mohammad Joshaghani
Keyword(s):  
Pvc Membrane ◽  
Indicator Electrode ◽  
Membrane Electrode ◽  
Selective Electrode ◽  
Good Discrimination ◽  
Discrimination Ability ◽  
Poly Vinyl Chloride ◽  
Pvc Membrane Electrode ◽  
Chloride Matrix

A new PVC membrane electrode highly selective to Mn(II), based on 2,2′-bis(salicylideneamino)azobenzene as an ionophore. The electrode exhibits a Nernstian response to Mn(II) ions over a concentration range 0.8 × 10–1–1.1 × 10–7 mol l–1 with a slope of 30.5 ± 0.5 mV per decade and detection limit 5.5 × 10–8 mol l–1. The electrode was used for 45 days at the minimum without any measurable potential divergence. Also, the electrode revealed a fairly good discrimination ability between Mn(II) ions and some cations and anions. The electrode was also utilized as indicator electrode in the potentiometric titration of Mn(II) with EDTA and in determination of Mn(II) in drug as well as tape and river water.

scholarly journals Synthesis of a New Calix[4]Arene and Its Application in Construction of a Highly Selective Silver Ion-Selective Membrane Electrode

2009 ◽  
Vol 2009 ◽  
pp. 1-5 ◽  
Author(s):  
Saeed Taghvaei-Ganjali ◽  
Reza Zadmard ◽  
Masoumeh Zeyaei ◽  
Kabeh Rahnama ◽  
Farnoush Faridbod ◽  
...  
Keyword(s):  
Response Time ◽  
Potentiometric Titration ◽  
Fast Response ◽  
Pvc Membrane ◽  
Indicator Electrode ◽  
Membrane Electrode ◽  
Membrane Sensor ◽  
Selective Membrane ◽  
Ph Range ◽  
Pvc Membrane Sensor

A PVC membrane sensor for Ag (I) ions has been prepared. The membrane has 5, 11, 17, 23-tetra-tert-butyl-25-(3-N, N-diethyldithio carbamoylpropoxy)-26,27,28-tris-propoxy calix[4]arene (CAD) as a carrier. It was found that the sensor exhibits a Nernstian response for Ag+ ions over a wide concentration range (10−2–10−6 M). Additionally, it illustrates a fast response time (about 5 seconds), and it can be used for at least 2 months without any considerable divergence in potentials. The nature of the plasticizer, the additive, the concentration of internal solutions in the electrodes, and the composition of the membrane were investigated. Furthermore, the suggested membrane electrode revealed good selectivities for Ag+ over a variety of other metal cations, and it could be used in the pH range of 3.0–7.0. Eventually, it was successfully applied as an indicator electrode for the potentiometric titration of Ag+ ion with NaCl.

Thiophene-based Schiff base ligand as ionophore for Ni(II)-selective polyvinyl chloride membrane electrode

2020 ◽  
Vol 40 (6) ◽  
pp. 481-485 ◽  
Author(s):  
Shankar Suman ◽  
Ram Singh
Keyword(s):  
Schiff Base ◽  
Polyvinyl Chloride ◽  
Ethylenediaminetetraacetic Acid ◽  
Pvc Membrane ◽  
Indicator Electrode ◽  
Membrane Electrode ◽  
Nonaqueous Media ◽  
Pvc Membrane Electrode ◽  
Ph Range ◽  
Polyvinyl Chloride Membrane

AbstractA synthesized Schiff base 2-acetylthiophene semicarbazone (3) was used for the preparation of Ni2+ selective polyvinyl chloride (PVC) membrane electrode. The prepared electrode with the optimized composition, PVC:3:sodium tetraphenylborate:di-n-butylphthalate as 33:6:3:58 exhibited a Nernstian response over the working range of 5.0 × 10−6–5.0 × 10−2 mol l−1 with a slope of 29.0 ± 0.3 mV/concentration. The electrode showed good selectivity towards Ni2+ with respect to several metal ions in the pH range of 2.5–10.0 in <15 s with a detection limit of 4.7 × 10−6 mol l−1. The electrode showed the additional benefit of working in partially nonaqueous media having up to 15% (v/v) methanol or ethanol. This electrode was also successfully applied in Ni2+ ion potentiometric titration with ethylenediaminetetraacetic acid as an indicator electrode.

scholarly journals Thiocyanate Ion-Selective PVC Membrane Electrode

2010 ◽  
Vol 5 (1) ◽  
pp. 73-77
Author(s):  
Mihail Revenco ◽  
Mariana Martin ◽  
Waell Abu Dayyih
Keyword(s):  
Pvc Membrane ◽  
Indicator Electrode ◽  
Membrane Electrode ◽  
Thiocyanate Ion ◽  
Pvc Membrane Electrode ◽  
Wide Ph Range ◽  
Nernstian Slope ◽  
Ph Range ◽  
Discriminating Ability ◽  
Selective Sensor

A potentiometric selective sensor based on trinuclear chromium(III) complex as a novel ionophore for the thiocyanateselective electrode is reported. The sensor displays a near Nernstian slope of 57 ± 2 mV per decade, over a wide pH range 3 - 11. The working concentration range of the electrode is 1.10-5 – 1.10-1 mol/l with a detection limit of 5.10-6 mol/l. The sensor has a response time of 20 s and can be used for at least 6 months without any considerable fluctuation of the potential. The selectivity coefficients determined at using the fixed interference method indicate a good discriminating ability towards other anions. The prepared sensor was applied as an indicator electrode in the titration of thiocyanate with Ag+.

Zn(II)-selective poly (vinyl chloride) (PVC) membrane electrode based on Schiff base ligand 2-benzoylpyridine semicarbazone as an ionophore

2020 ◽  
Vol 40 (10) ◽  
pp. 842-847
Author(s):  
Shankar Suman ◽  
Ram Singh
Keyword(s):  
Schiff Base ◽  
Detection Limit ◽  
Vinyl Chloride ◽  
Pvc Membrane ◽  
Membrane Electrode ◽  
Sodium Tetraphenylborate ◽  
Potential Response ◽  
Selective Electrode ◽  
Poly Vinyl Chloride ◽  
Pvc Membrane Electrode

AbstractA new poly (vinyl chloride) (PVC) membrane electrode using 2-benzoylpyridine semicarbazone as membrane carrier with dioctylphthalate as plasticizer and sodium tetraphenylborate (NaTBP) as anion excluder has been fabricated and investigated as Zn(II)-selective electrode. Best potential response is observed for the composition PVC 30%, plasticizer 58%, NaTBP 8% and ionophore 4% (w/w). The sensor showed a linear stable response over a concentration range of 1.0 × 10−2–4.56 × 10−6 M with a detection limit of 2.28 × 10−6 M and a response time <10 s. The electrode can be used for at least six months without any divergence in potential.

scholarly journals Ion-Selective Electrode for Anionic Surfactants Using Hexadecyl Trimethyl Ammonium Bromide-Sodium Dodecylsulfate as an Active Ionophore

2011 ◽  
Vol 2011 ◽  
pp. 1-7 ◽  
Author(s):  
Junwei Wang ◽  
Zhiping Du ◽  
Wanxu Wang ◽  
Wei Xue
Keyword(s):  
Limit Of Detection ◽  
Sodium Dodecylsulfate ◽  
Poor Response ◽  
Pvc Membrane ◽  
Indicator Electrode ◽  
Membrane Electrode ◽  
Ammonium Bromide ◽  
Hexadecyl Trimethyl Ammonium Bromide ◽  
Pvc Membrane Electrode ◽  
Wide Ph Range

The construction and characteristic performance of PVC membrane electrode responsive to sodium dodecylsulfate (SDS) are described in this paper. The electrode is based on hexadecyl trimethyl ammonium bromide-Sodium dodecylsulfate (CTA+DS−) ion pair as ionophore in PVC membrane, which displays a Nernstian slope of −58 ± 0.9 mV/decade in a 5.0 × 10−6to 2.5 × 10−3 mol L−1concentration range and a limit of detection of 2.9 × 10−6 mol L−1. The electrode can be used for 3 months without showing significant changes in the value of slope or working range. Also the electrode has wide pH range of application and short response time. The electrode shows a selective response to SDS and a poor response to common inorganic anions. The selective sequence found was SDS > HCO3 −> CH3COO−> Cl−> I−> NO3 −≈Br−> F−> CO3 2−> C6H5O7 3−> C2O4 2−> SO4 2−> C4H4O6 2−> SO3 2−> PO4 3−. The potentiometric selectivity coefficients determined are indicating that common anions would not interfere in the SDS determination. The electrode has been utilized as an end point indicator electrode for potentiometric titration involving hyamine as titrant.

Dysprosium(III) Ion-Selective Electrochemical Sensor Based on 6-Hydrazino-1,5-diphenyl-6,7-dihydropyrazolo[3,4-d]pyrimidine-4(5H)-imine

2007 ◽  
Vol 72 (9) ◽  
pp. 1189-1206 ◽  
Author(s):  
Hassan Ali Zamani ◽  
Mohammad Reza Ganjali ◽  
Nasim Seifi
Keyword(s):  
Heavy Metal Ions ◽  
Alkaline Earth ◽  
Fast Response ◽  
Sensor Response ◽  
Indicator Electrode ◽  
Selective Electrode ◽  
Membrane Sensor ◽  
Sensing Material ◽  
Ph Range

A Dy(III) ion-selective electrode based on 6-hydrazino-1,5-diphenyl-6,7-dihydropyrazolo[3,4-d]pyrimidine-4(5H)-imine (HDDPI) as an excellent sensing material was developed. The sensor exhibits a Nernstian behavior (a slope of 19.6 ± 0.3 mV per decade) over a wide concentration range (from 1.0 × 10-1 to 8.0 × 10-7 M Dy) with a detection limit of 4.2 × 10-7 M. The sensor response is independent of pH of the solution in the pH range 3.5-8.3. The sensor possesses the advantages of short conditioning time, fast response time (<10 s) and in particular, good selectivity and sensitivity to the dysprosium ion in the presence of a variety of cations, including alkali, alkaline earth, transition and heavy metal ions. The sensor also showed a great enhancement in selectivity coefficients for dysprosium ions, in comparison with the formerly mentioned dysprosium sensors. The electrode can be used for at least 10 weeks without any considerable divergence in the potentials. The proposed electrode was successfully used as an indicator electrode in potentiometric titration of Dy(III) ions with EDTA. The membrane sensor was also used in the determination of concentration of F- ions in some mouth washing solutions and in the Dy3+ recovery from solution.

scholarly journals An Enantioselective Potentiometric Sensor for 2-Amino-1-Butanol Based on Chiral Porous Organic Cage CC3-R

Molecules ◽  
2019 ◽  
Vol 24 (3) ◽  
pp. 420 ◽  
Author(s):  
Bang-Jin Wang ◽  
Ai-Hong Duan ◽  
Jun-Hui Zhang ◽  
Sheng-Ming Xie ◽  
Qiu-E Cao ◽  
...  
Keyword(s):  
Polyvinyl Chloride ◽  
Potentiometric Sensor ◽  
Pvc Membrane ◽  
Membrane Electrode ◽  
Pvc Membrane Electrode ◽  
Application Potential ◽  
Ph Range

Porous organic cages (POCs) have attracted extensive attention due to their unique structures and tremendous application potential in numerous areas. In this study, an enantioselective potentiometric sensor composed of a polyvinyl chloride (PVC) membrane electrode modified with CC3-R POC material was used for the recognition of enantiomers of 2-amino-1-butanol. After optimisation, the developed sensor exhibited enantioselectivity toward S-2-amino-1-butanol ( log K S , R P o t = −0.98) with acceptable sensitivity, and a near-Nernstian response of 25.8 ± 0.3 mV/decade within a pH range of 6.0–9.0.

scholarly journals Construction of Eu3+Ion-Selective Electrode Based on 1,2-Diaminopropane-N,N,N',N'-tetraacetic acid

2011 ◽  
Vol 8 (s1) ◽  
pp. S467-S473 ◽  
Author(s):  
Mohammad Reza Abedi ◽  
Hassan Ali Zamani
Keyword(s):  
Alkaline Earth ◽  
Dynamic Range ◽  
Pvc Membrane ◽  
Membrane Electrode ◽  
Tetraacetic Acid ◽  
Pvc Membrane Electrode ◽  
Nernstian Slope ◽  
Wide Linear Dynamic Range ◽  
Ph Range

A new Eu3+PVC membrane electrode based on 1,2-diaminopropane-N, N,N',N'-tetraacetic acid (DAPTA) as a suitable ionophore has been prepared and studied. The electrode shows a good selectivity for Eu(III) ion with respect to most common cations including alkali, alkaline earth, transition and heavy metal ions. This electrode has a wide linear dynamic range from 1.0×10-6to 1.0×10-2M with a Nernstian slope of 19.7±0.5 mV per decade and a low detection limit of 7.2×10-7M in the pH range of 2.5–9.1, while the response time was rapid (<10 s). The practical utility of the electrodes has been demonstratedby their use as indicator electrodes in the potentiometric titration of Eu3+ions with EDTA and for the determination of Eu3+in some water sample solutions.

Sign in / Sign up

Export Citation Format

Share Document