scholarly journals A Study on the Influence of the Forming Strategy on the Main Strains, Thickness Reduction, and Forces in a Single Point Incremental Forming Process

2013 ◽  
Vol 2013 ◽  
pp. 1-10 ◽  
Author(s):  
Adrian Blaga ◽  
Valentin Oleksik
Keyword(s):  
Complex Geometry ◽  
Incremental Forming ◽  
Single Point ◽  
Thickness Reduction ◽  
Circular Path ◽  
Single Point Incremental Forming ◽  
Cnc Milling ◽  
Forming Process ◽  
Truncated Cone ◽  
Forming Strategy

This paper comprises an experimental study for a complex geometry part obtained by incremental forming. Due to the process complexity (the presence of forces on three directions—a vertical one and two in the blank's plane), a three axes CNC milling machine, capable of describing the complex paths covered by the punch for obtaining the truncated cone-shaped parts, has been chosen. To obtain a truncated cone, three different trajectories were selected: in first and second variants after each vertical press having a constant step, the punch covers a circular path. The differences show that the following circular trajectory can start at the same point or can be shifted at an angle of 90° from the previous press point. In the last variant, the punch performs a spatial spiral trajectory. The main objective of our study was to determine the optimal forming strategy, by shifting the press position of the punch and the path it follows to obtain a truncated cone through single point incremental forming. Thus, the strain distribution can be homogeneous, and the thickness reduction and the process forces are minimal.

Study on Forming Behaviour of Friction Stir Welded Blanks During Single Point Incremental Forming (SPIF) Process

2020 ◽  
Author(s):  
Shalin Marathe ◽  
Harit Raval
Keyword(s):  
Friction Stir Welding ◽  
Incremental Forming ◽  
Single Point ◽  
Base Material ◽  
Forming Limit ◽  
Single Point Incremental Forming ◽  
Cnc Milling ◽  
Forming Process ◽  
Friction Stir ◽  
Welding Processes

Abstract The automobile, transportation and shipbuilding industries are aiming at fuel efficient products. In order to enhance the fuel efficiency, the overall weight of the product should be brought down. This requirement has increased the use of material like aluminium and its alloys. But, it is difficult to weld aluminium using conventional welding processes. This problem can be solved by inventions like friction stir welding (FSW) process. During fabrication of product, FSW joints are subjected to many different processes and forming is one of them. During conventional forming, the formability of the welded blanks is found to be lower than the formability of the parent blank involved in it. One of the major reasons for reduction in formability is the global deformation provided on the blank during forming process. In order to improve the formability of homogeneous blanks, Single Point Incremental Forming (SPIF) is found to be giving excellent results. So, in this work formability of the welded blanks is investigated during the SPIF process. Friction Stir Welding is used to fabricate the welded blanks using AA 6061 T6 as base material. Welded blanks are formed in to truncated cone through SPIF process. CNC milling machine is used as SPIF machine tool to perform the experimental work. In order to avoid direct contact between weld seam and forming tool, a dummy sheet was used between them. As responses forming limit curve (FLC), surface roughness, and thinning are investigated. It was found that use of dummy sheet leads to improve the surface finish of the formed blank. The formability of the blank was found less in comparison to the parent metal involved in it. Uneven distribution of mechanical properties in the welded blanks leads to decrease the formability of the welded blanks.

Investigations about the Single Point Incremental Forming of Anisotropic Titanium Alloy Sheets

2011 ◽  
Vol 264-265 ◽  
pp. 188-193 ◽  
Author(s):  
G. Palumbo ◽  
Marco Brandizzi ◽  
G. Cervelli ◽  
M. Fracchiolla
Keyword(s):  
Tool Path ◽  
Incremental Forming ◽  
Single Point ◽  
Tensile Tests ◽  
Single Point Incremental Forming ◽  
Cnc Milling ◽  
Forming Process ◽  
Fe Simulations ◽  
Shape Errors ◽  
Optical Strain

The present work focuses the attention on the Single Point Incremental Forming (SPIF) of the Titanium (Ti) alloy Ti-6Al-4V. Tensile tests were carried out using the optical strain measurement system Aramis3D, in order to determine the mechanical behaviour of the alloy and to investigate the anisotropy of such alloy. Finite Element (FE) simulations of the SPIF process (using ABAQUS/explicit) were performed using a simple but non-axialsymmetric shape (truncated pyramid) with the aim of investigating the effect of both the tool/pitch ratio (D/p) and the draw angle (α), taking into account the anisotropic behaviour. The analysis of plastic strains and thinning maps, together with the evaluation of shape errors originated by the forming process, highlighted that the parameter D/p plays a key role in the SPIF. Results from the preliminary FE analysis were used for investigating the production by SPIF of an automotive component (car door shell). A specific subroutine was created by the authors for automatically generating the tool path to be used in both the FE simulations and the manufacturing of parts by SPIF on a CNC milling machine.

CAD/CAM Strategies for a Parallel Kinematics SPIF Machine

2013 ◽  
Vol 554-557 ◽  
pp. 2221-2229 ◽  
Author(s):  
João B.S. Farias ◽  
Miguel A.B.E. Martins ◽  
Daniel G. Afonso ◽  
Sonia R.H. Marabuto ◽  
Jorge A. Ferreira ◽  
...  
Keyword(s):  
Tool Path ◽  
Incremental Forming ◽  
Single Point ◽  
Single Point Incremental Forming ◽  
Cnc Milling ◽  
Parallel Kinematics ◽  
Forming Process ◽  
Advantages And Disadvantages ◽  
Cad Cam ◽  
Five Axis

Single point incremental forming has attracted the interest of researchers in the last decade for the production of prototypes and small batch production of sheet-based parts [1, 2]. This technique allows the manufacture of parts without using expensive die sets. The SPIF (Single point incremental forming) process can be performed on different equipments such as adapted CNC milling machines, serial robots and built proposed machines [3]. Every solution has advantages and disadvantages. This work presents the CAD/CAM strategies for a parallel kinematics SPIF machine, designed and built at the University of Aveiro [3]. This machine brings a new approach to the SPIF industry. The machinery used to perform SPIF operations has limitations in their work volume with limited movements and in the magnitude of applicable forces. With that in mind, this machine was projected to overcome that obstacle, and was provided with a system with 6 degrees of freedom, while maintaining the ability to apply high loads. The disadvantage is the increase in volume occupied by the kinematic system. The manufacture of new parts could be reached out with more flexibility on the chosen tool path. The first step is the product design in the commercial CAD system. Next step is generating the tool path of the forming tool. This step is very important to achieve the desired part shape. It is used a commercial CAM system (EdgeCAM 2012®), which has resources from three up to five axis strategies. The last step is to send the information to the machine’s control system, based on real-time software. This paper will describe each step with more details.

Implementing Thermomechanical Properties of 22MnB5 Steel during Hot Single-Point Incremental Forming

2017 ◽  
Vol 890 ◽  
pp. 362-366 ◽  
Author(s):  
Amar Al-Obaidi ◽  
Verena Kräusel ◽  
Dirk Landgrebe
Keyword(s):  
Mechanical Properties ◽  
Incremental Forming ◽  
Sheet Material ◽  
Single Point ◽  
Thermomechanical Properties ◽  
Alloy Sheet ◽  
Process Time ◽  
Single Point Incremental Forming ◽  
Cnc Milling ◽  
Forming Process

The strategy in manufacturing hardened parts used in car bodies is to tailor the mechanical properties. This is done by combining together a high-strength region and a high-toughness region to ensure the crash performance required. Other successive secondary operations such as trimming, joining and welding can be improved as a result of the tailoring process. In this work, the mechanical properties of 22MnB5 alloy sheet material produced by single-point incremental forming have been tailored. For this purpose, the sheets were locally heated by induction during the forming process and subsequently cooled. The sheet temperature was controlled by the CNC milling machine feed rate and induction power. As a result, the produced tailored parts consist of three different regions: ductile, transition and hardened regions. The Vickers hardness values were 583 HV1 and 175 HV1 for the hardened and ductile regions, respectively. The proposed application allows forming and quenching at the same time without transfer and to reduce the process time.

scholarly journals Numerical Study about the Influence of Wall Angle about Main Strains, Thickness Reduction and Forces on Single Point Incremental Forming Process

2016 ◽  
Vol 68 (1) ◽  
pp. 1-6 ◽  
Author(s):  
Valentin Oleksik
Keyword(s):  
Incremental Forming ◽  
Numerical Study ◽  
Single Point ◽  
Testing Machine ◽  
Thickness Reduction ◽  
Single Point Incremental Forming ◽  
Forming Process ◽  
Wall Angle ◽  
Traction Test ◽  
Explicit Dynamic

Abstract The current paper aims to study, using numerical simulation, the influence of the wall angle on the single point incremental forming process. For the analysis there has been used the LS-Dyna software and three explicit dynamic analyses were run for three parts with wall angles of 450, 550 and 650. The factors taken into account are the main strains, the thickness reduction and the forces on three directions. The material data introduced into the simulation were determined based on an uniaxial traction test on an Instron 5587 testing machine and the Aramis system was used as optical extensometer.

scholarly journals Experimental Study Regarding PA and PE Sheets on Single Point Incremental Forming Process

2021 ◽  
Vol 343 ◽  
pp. 03009
Author(s):  
Nicolae Rosca ◽  
Mihaela Oleksik ◽  
Valentin Oleksik
Keyword(s):  
Experimental Study ◽  
Incremental Forming ◽  
Single Point ◽  
Correlation Method ◽  
Image Correlation ◽  
Thickness Reduction ◽  
Single Point Incremental Forming ◽  
Minor Strain ◽  
Forming Process ◽  
Incremental Process

The present paper aims to present an experimental study on the behaviour of PA and PE sheets during the single point incremental forming. Due to the fact that the purpose of this research is to study the behaviour of PA and PE sheets during the single point incremental process both in terms of process forces and in terms of major and minor strain and thickness reduction, a Kuka Kr210 robot was chosen as an alternative to using a universal milling machine. The specimens were made of 3 mm PA and PE sheets. The size of the sheets was 250 mm x 250 mm. The forces measured on the three directions of the coordinate axes were compared. To measure the major strain, minor strain and thickness reduction, the digital image correlation method was applied.

Creating Helical Tool Paths for Single Point Incremental Forming

2007 ◽  
Vol 344 ◽  
pp. 583-590 ◽  
Author(s):  
M. Skjoedt ◽  
M.H. Hancock ◽  
N. Bay
Keyword(s):  
Tool Path ◽  
Incremental Forming ◽  
Single Point ◽  
Angular Position ◽  
Work Piece ◽  
Single Point Incremental Forming ◽  
Cnc Milling ◽  
Forming Process ◽  
Major Disadvantage ◽  
Continuous Feed

Single point incremental forming (SPIF) is a relatively new sheet forming process. A sheet is clamped in a rig and formed incrementally using a rotating single point tool in the form of a rod with a spherical end. The process is often performed on a CNC milling machine and the tool movement is programed using CAM software intended for surface milling. Often the function called profile milling or contour milling is applied. Using this milling function the tool only has a continuous feed rate in two directions X and Y, which is the plane of the undeformed sheet. The feed in the vertical Z direction is done in the same angular position in the XY plane along a line down the side of the work piece. This causes a scarring of the side and also results in a peak in the axial force when the tool is moved down. The present paper offers a solution to this problem. A dedicated program uses the coordinates from the profile milling code and converts them into a helical tool path with continuous feed in all three directions. Using the helical tool path the scarring is removed, the part is otherwise unchanged and a major disadvantage of using milling software for SPIF is removed. The solution is demonstrated by SPIF of three different geometries: a pyramid, a cone and a complex part.

Geometry Compensation Methods for Increasing the Accuracy of the SPIF Process

2021 ◽  
Vol 883 ◽  
pp. 217-224
Author(s):  
Yannick Carette ◽  
Marthe Vanhulst ◽  
Joost R. Duflou
Keyword(s):  
Control Strategy ◽  
Incremental Forming ◽  
Single Point ◽  
Single Point Incremental Forming ◽  
Calculation Methods ◽  
Forming Process ◽  
Complex Deformation ◽  
Commercial Use ◽  
Compensation Methods ◽  
Deformation Mechanics

Despite years of supporting research, commercial use of the Single Point Incremental Forming process remains very limited. The promised flexibility and lack of specific tooling is contradicted by its highly complex deformation mechanics, resulting in a process that is easy to implement but where workpiece accuracy is very difficult to control. This paper looks at geometry compensation as a viable control strategy to increase the accuracy of produced workpieces. The input geometry of the process can be compensated using knowledge about the deformations occurring during production. The deviations between the nominal CAD geometry and the actual produced geometry can be calculated in a variety of different ways, thus directly influencing the compensation. Two different alignment methods and three deviation calculation methods are explained in detail. Six combined deviation calculation methods are used to generate compensated inputs, which are experimentally produced and compared to the uncompensated part. All different methods are able to noticeably improve the accuracy, with the production alignment and closest point deviation calculation achieving the best results

Sign in / Sign up

Export Citation Format

Share Document