CAD/CAM Strategies for a Parallel Kinematics SPIF Machine

2013 ◽  
Vol 554-557 ◽  
pp. 2221-2229 ◽  
Author(s):  
João B.S. Farias ◽  
Miguel A.B.E. Martins ◽  
Daniel G. Afonso ◽  
Sonia R.H. Marabuto ◽  
Jorge A. Ferreira ◽  
...  
Keyword(s):  
Tool Path ◽  
Incremental Forming ◽  
Single Point ◽  
Single Point Incremental Forming ◽  
Cnc Milling ◽  
Parallel Kinematics ◽  
Forming Process ◽  
Advantages And Disadvantages ◽  
Cad Cam ◽  
Five Axis

Single point incremental forming has attracted the interest of researchers in the last decade for the production of prototypes and small batch production of sheet-based parts [1, 2]. This technique allows the manufacture of parts without using expensive die sets. The SPIF (Single point incremental forming) process can be performed on different equipments such as adapted CNC milling machines, serial robots and built proposed machines [3]. Every solution has advantages and disadvantages. This work presents the CAD/CAM strategies for a parallel kinematics SPIF machine, designed and built at the University of Aveiro [3]. This machine brings a new approach to the SPIF industry. The machinery used to perform SPIF operations has limitations in their work volume with limited movements and in the magnitude of applicable forces. With that in mind, this machine was projected to overcome that obstacle, and was provided with a system with 6 degrees of freedom, while maintaining the ability to apply high loads. The disadvantage is the increase in volume occupied by the kinematic system. The manufacture of new parts could be reached out with more flexibility on the chosen tool path. The first step is the product design in the commercial CAD system. Next step is generating the tool path of the forming tool. This step is very important to achieve the desired part shape. It is used a commercial CAM system (EdgeCAM 2012®), which has resources from three up to five axis strategies. The last step is to send the information to the machine’s control system, based on real-time software. This paper will describe each step with more details.

Investigations about the Single Point Incremental Forming of Anisotropic Titanium Alloy Sheets

2011 ◽  
Vol 264-265 ◽  
pp. 188-193 ◽  
Author(s):  
G. Palumbo ◽  
Marco Brandizzi ◽  
G. Cervelli ◽  
M. Fracchiolla
Keyword(s):  
Tool Path ◽  
Incremental Forming ◽  
Single Point ◽  
Tensile Tests ◽  
Single Point Incremental Forming ◽  
Cnc Milling ◽  
Forming Process ◽  
Fe Simulations ◽  
Shape Errors ◽  
Optical Strain

The present work focuses the attention on the Single Point Incremental Forming (SPIF) of the Titanium (Ti) alloy Ti-6Al-4V. Tensile tests were carried out using the optical strain measurement system Aramis3D, in order to determine the mechanical behaviour of the alloy and to investigate the anisotropy of such alloy. Finite Element (FE) simulations of the SPIF process (using ABAQUS/explicit) were performed using a simple but non-axialsymmetric shape (truncated pyramid) with the aim of investigating the effect of both the tool/pitch ratio (D/p) and the draw angle (α), taking into account the anisotropic behaviour. The analysis of plastic strains and thinning maps, together with the evaluation of shape errors originated by the forming process, highlighted that the parameter D/p plays a key role in the SPIF. Results from the preliminary FE analysis were used for investigating the production by SPIF of an automotive component (car door shell). A specific subroutine was created by the authors for automatically generating the tool path to be used in both the FE simulations and the manufacturing of parts by SPIF on a CNC milling machine.

Creating Helical Tool Paths for Single Point Incremental Forming

2007 ◽  
Vol 344 ◽  
pp. 583-590 ◽  
Author(s):  
M. Skjoedt ◽  
M.H. Hancock ◽  
N. Bay
Keyword(s):  
Tool Path ◽  
Incremental Forming ◽  
Single Point ◽  
Angular Position ◽  
Work Piece ◽  
Single Point Incremental Forming ◽  
Cnc Milling ◽  
Forming Process ◽  
Major Disadvantage ◽  
Continuous Feed

Single point incremental forming (SPIF) is a relatively new sheet forming process. A sheet is clamped in a rig and formed incrementally using a rotating single point tool in the form of a rod with a spherical end. The process is often performed on a CNC milling machine and the tool movement is programed using CAM software intended for surface milling. Often the function called profile milling or contour milling is applied. Using this milling function the tool only has a continuous feed rate in two directions X and Y, which is the plane of the undeformed sheet. The feed in the vertical Z direction is done in the same angular position in the XY plane along a line down the side of the work piece. This causes a scarring of the side and also results in a peak in the axial force when the tool is moved down. The present paper offers a solution to this problem. A dedicated program uses the coordinates from the profile milling code and converts them into a helical tool path with continuous feed in all three directions. Using the helical tool path the scarring is removed, the part is otherwise unchanged and a major disadvantage of using milling software for SPIF is removed. The solution is demonstrated by SPIF of three different geometries: a pyramid, a cone and a complex part.

Study on Forming Behaviour of Friction Stir Welded Blanks During Single Point Incremental Forming (SPIF) Process

2020 ◽  
Author(s):  
Shalin Marathe ◽  
Harit Raval
Keyword(s):  
Friction Stir Welding ◽  
Incremental Forming ◽  
Single Point ◽  
Base Material ◽  
Forming Limit ◽  
Single Point Incremental Forming ◽  
Cnc Milling ◽  
Forming Process ◽  
Friction Stir ◽  
Welding Processes

Abstract The automobile, transportation and shipbuilding industries are aiming at fuel efficient products. In order to enhance the fuel efficiency, the overall weight of the product should be brought down. This requirement has increased the use of material like aluminium and its alloys. But, it is difficult to weld aluminium using conventional welding processes. This problem can be solved by inventions like friction stir welding (FSW) process. During fabrication of product, FSW joints are subjected to many different processes and forming is one of them. During conventional forming, the formability of the welded blanks is found to be lower than the formability of the parent blank involved in it. One of the major reasons for reduction in formability is the global deformation provided on the blank during forming process. In order to improve the formability of homogeneous blanks, Single Point Incremental Forming (SPIF) is found to be giving excellent results. So, in this work formability of the welded blanks is investigated during the SPIF process. Friction Stir Welding is used to fabricate the welded blanks using AA 6061 T6 as base material. Welded blanks are formed in to truncated cone through SPIF process. CNC milling machine is used as SPIF machine tool to perform the experimental work. In order to avoid direct contact between weld seam and forming tool, a dummy sheet was used between them. As responses forming limit curve (FLC), surface roughness, and thinning are investigated. It was found that use of dummy sheet leads to improve the surface finish of the formed blank. The formability of the blank was found less in comparison to the parent metal involved in it. Uneven distribution of mechanical properties in the welded blanks leads to decrease the formability of the welded blanks.

A Study on Using Cover Blank in Single Point Incremental Forming Process by Finite Element Analysis

2015 ◽  
Vol 809-810 ◽  
pp. 277-282
Author(s):  
Khalil Ibrahim Abass
Keyword(s):  
Tool Path ◽  
Incremental Forming ◽  
Sheet Material ◽  
Single Point ◽  
Complex Nature ◽  
Work Piece ◽  
Process Conditions ◽  
Single Point Incremental Forming ◽  
Forming Process ◽  
Highly Nonlinear

The Single Point Incremental Forming Process (SPIF) is a forming technique of sheet material based on layered manufacturing principles. The forming tool is moved along the tool path while the edges of sheet material are clamped. The finished part is manufactured by the CNC machine. SPIF involves extensive plastic deformation and the description of the process is more complicated by highly nonlinear boundary conditions, namely contact and frictional effects have been accomplished. However, due to the complex nature of these models, numerical approaches dominated by the FEA are now in widespread use. The paper presents the data and main results of a study on effect of using cover blank in SPIF through FEA. The considered SPIF has been studied under certain process conditions referring to the test work piece, tool, etc., applying ANSYS 11.0. The results show that the simulation model can predict an ideal profile of processing track, spring back error of SPIF, the behavior of contact tool-work piece, the product accuracy by evaluation its thickness and strain distributions, the contact status and chattering among surface interface tool-work piece.

Effect of Toolpath on the Springback of 2024-T3 Aluminum During Single Point Incremental Forming

2015 ◽  
Author(s):  
Zachary C. Reese ◽  
Brandt J. Ruszkiewicz ◽  
Chetan P. Nikhare ◽  
John T. Roth
Keyword(s):  
Residual Stresses ◽  
Sheet Metal ◽  
Tool Path ◽  
Incremental Forming ◽  
Single Point ◽  
Final Part ◽  
Cnc Milling ◽  
Forming Process ◽  
Step Size ◽  
Part Geometry

Incremental forming is a nontraditional forming method in which a spherical tool is used to asymmetrically deform sheet metal without the need for expensive allocated dies. Incremental forming employs a tool path similar to that used when CNC milling. Hence, when forming a part, the forming tool makes a series of passes circumferentially around the workpiece, gradually spirally stepping down in the z-axis on each sequential pass. This tool path deforms the sheet metal stock into the final, desired shape. These passes can start from the outer radius of the part and work in (Out to In, OI forming) or they can start from the center of the shape and work outward (In to Out, IO forming). As with many sheet metal operations, springback is a big concern during the incremental forming process. During the deformation process, residual stresses are created within the workpiece causing the final formed shape to springback when it is unclamped, sometimes very significantly. The more complex the geometry of the final part and the more total deformation that occurs when forming the geometry, the greater the residual stresses that are generated within the part. The residual stresses that have built up in the piece cause more significant distortion to the part when it is released from the retaining fixturing. This paper examines how the step size (in the z direction), OI vs. IO forming, and final part geometry affect the total springback in a finished piece. For all of these tests 0.5 mm thick sheets of 2024-T3 aluminum were used to form both the truncated pyramid and truncated cone shape. From this investigation it was found that smaller step sizes result in greater springback, IO is significantly less effective in forming the part (due to workpiece tearing), and final part geometry plays an important role due to the creation of residual stresses that exist in corners.

scholarly journals Tool Path Design of the Counter Single Point Incremental Forming Process to Decrease Shape Error

Materials ◽  
2020 ◽  
Vol 13 (21) ◽  
pp. 4719
Author(s):  
Kyu-Seok Jung ◽  
Jae-Hyeong Yu ◽  
Wan-Jin Chung ◽  
Chang-Whan Lee
Keyword(s):  
Sheet Metal ◽  
Tool Path ◽  
Incremental Forming ◽  
Single Point ◽  
Optimization Method ◽  
Single Point Incremental Forming ◽  
Shape Error ◽  
Forming Process ◽  
Two Stage ◽  
Shape Errors

Incremental sheet metal forming can manufacture various sheet metal products without a dedicated punch and die set. In this study, we developed a two-stage incremental forming process to decrease shape errors in the conventional incremental forming process. The forming process was classified into the first single point incremental forming (1st SPIF) process for forming a product and the counter single point incremental forming (counter SPIF) process to decrease shape error. The counter SPIF gives bending deformation in the opposite direction. Furthermore, the counter SPIF compensates for shape errors, such as section deflection, skirt spring-back, final forming height, and round. The tool path of the counter SPIF has been optimized through a relatively simple optimization method by modifying the tool path of the previous step. The tool path of the 1st SPIF depends on the geometry of the product. An experiment was performed to form a circular cup shape to verify the proposed tool path of the 1st and counter SPIF. The result confirmed that the shape error decreased when compared to the conventional SPIF. For the application, the ship-hull geometry was adopted. Experimental results demonstrated the feasibility of the two-stage incremental forming process.

scholarly journals A CALCULATION OF POWER FOR FORMING METAL SHEET BY SPIF PROCESS

2009 ◽  
Vol 12 (4) ◽  
pp. 5-17
Author(s):  
Nam Thanh Nguyen ◽  
Dien Khanh Le ◽  
Sy Van Le
Keyword(s):  
Crystal Plasticity ◽  
Manufacturing Process ◽  
Incremental Forming ◽  
Single Point ◽  
Metal Sheet ◽  
Single Point Incremental Forming ◽  
Milling Machine ◽  
Cnc Milling ◽  
Cnc Milling Machine ◽  
Cad Cam

This paper attempts to represent a case of calculating of the energy power that is consumed by CNC milling machine when manufacturing via forming membrane metal sheet by SPIF (Single Point Incremental Forming), the recent manufacturing process of metal sheet forming by drafting a no cutting-edge spheric tip tool on a clamped metal sheet. The calculation is based on the disclocation, the crystal plasticity and the slip of lattices inside the structure of the deformed metal. In the while time there is a series of empirical species of 24 groups batch of workpieces that were also machined by CNC milling machine Bridge Port VMC500, CAD/CAM Lab., FME of HCMUT for checking this calculation on consumed power.

Implementing Thermomechanical Properties of 22MnB5 Steel during Hot Single-Point Incremental Forming

2017 ◽  
Vol 890 ◽  
pp. 362-366 ◽  
Author(s):  
Amar Al-Obaidi ◽  
Verena Kräusel ◽  
Dirk Landgrebe
Keyword(s):  
Mechanical Properties ◽  
Incremental Forming ◽  
Sheet Material ◽  
Single Point ◽  
Thermomechanical Properties ◽  
Alloy Sheet ◽  
Process Time ◽  
Single Point Incremental Forming ◽  
Cnc Milling ◽  
Forming Process

The strategy in manufacturing hardened parts used in car bodies is to tailor the mechanical properties. This is done by combining together a high-strength region and a high-toughness region to ensure the crash performance required. Other successive secondary operations such as trimming, joining and welding can be improved as a result of the tailoring process. In this work, the mechanical properties of 22MnB5 alloy sheet material produced by single-point incremental forming have been tailored. For this purpose, the sheets were locally heated by induction during the forming process and subsequently cooled. The sheet temperature was controlled by the CNC milling machine feed rate and induction power. As a result, the produced tailored parts consist of three different regions: ductile, transition and hardened regions. The Vickers hardness values were 583 HV1 and 175 HV1 for the hardened and ductile regions, respectively. The proposed application allows forming and quenching at the same time without transfer and to reduce the process time.

scholarly journals Comparative Study About Different Experimental Layouts Used on Single Point Incremental Forming Process

2018 ◽  
Vol 70 (1) ◽  
pp. 21-27
Author(s):  
Mihaela Oleksik
Keyword(s):  
Comparative Study ◽  
Incremental Forming ◽  
Single Point ◽  
Industrial Robots ◽  
Single Point Incremental Forming ◽  
Forming Process ◽  
Advantages And Disadvantages ◽  
Milling Machines ◽  
The Comparative Study ◽  
Technological Opportunities

Abstract The present paper proposes a comparative study between two of the most used experimental layouts on the single point incremental forming with the advantages and disadvantages of these experimental layouts. After a short presentation of the newest technological opportunities on single point incremental forming, the paper presents a classification of the experimental layouts used on this kind of forming process. The comparative study highlights the advantages and the disadvantages of using the universal milling machines and the industrial robots on single point incremental forming. There are presented the results focused on thinning and forces in the SPIF process.

Sign in / Sign up

Export Citation Format

Share Document