scholarly journals Model Reduction Technique Tailored to the Dynamic Analysis of a Beam Structure under a Moving Load

2014 ◽  
Vol 2014 ◽  
pp. 1-13 ◽  
Author(s):  
Yuanchang Chen ◽  
Bangji Zhang ◽  
Shengzhao Chen
Keyword(s):  
Dynamic Analysis ◽  
Model Reduction ◽  
Moving Load ◽  
Single Point ◽  
Point Load ◽  
Computational Time ◽  
Small Scale ◽  
Response Analysis ◽  
Computational Accuracy ◽  
Beam Structure

This study presents a technique that uses a model reduction method for the dynamic response analysis of a beam structure to a moving load, which can be modeled either as a moving point force or as a moving body. The nature of the dedicated condensation method tailored to address the moving load case is that the master degrees of freedom are reselected, and the coefficient matrices of the condensed model are recalculated as the load travels from one element to another. Although this process increases computational burden, the overall computational time is still greatly reduced because of the small scale of motion equations. To illustrate and validate the methodology, the technique is initially applied to a simply supported beam subjected to a single-point load moving along the beam. Subsequently, the technique is applied to a practical model for wheel-rail interaction dynamic analysis in railway engineering. Numerical examples show that the condensation model can solve the moving load problem faster than an analytical model or its full finite element model. The proposed model also exhibits high computational accuracy.

Dynamic Response of Multi-bay Frames Subjected to Successive Moving Forces

2019 ◽  
Vol 19 (04) ◽  
pp. 1950042
Author(s):  
Salih Demirtas ◽  
Hasan Ozturk ◽  
Mustafa Sabuncu
Keyword(s):  
Finite Element ◽  
Dynamic Response ◽  
Moving Load ◽  
Single Point ◽  
Vertical Direction ◽  
Point Load ◽  
Dynamic Responses ◽  
Moving Loads ◽  
Element Analysis ◽  
Constant Interval

This paper investigates the dynamic responses of multi-bay frames with identical bay lengths subjected to a transverse single moving load and successive moving loads with a constant interval at a constant speed. The effects of the bay length and the speed of the moving load on the response of the multi-bay frame subjected to a single point load are investigated numerically by the finite element method. A computer code is developed by using MATLAB to perform the finite element analysis. The Newmark method is employed to solve for the dynamic responses of the multi-bay frame. With this, the dynamic response of the frame subjected to successive moving loads with a constant interval is investigated. Also, the resonance and cancellation speeds are determined by using the 3D relationship of speed parameter-force span length to beam length ratio-dynamic magnification factor and the associated contour lines. The maximum impact factor of a 1-bay frame and multi-bay frames under single moving load are determined at the specific speed parameters. Those values are independent of elastic modulus, area moment of inertia, beam/column lengths of the frame and also the number of bays forming the frame. It is also found that the first resonance response in the vertical direction of the frame is related to the second mode of vibration.

scholarly journals Stereo-DIC Measurements of a Vibrating Bladed Disk: In-Depth Analysis of Full-Field Deformed Shapes

2021 ◽  
Vol 11 (12) ◽  
pp. 5430
Author(s):  
Paolo Neri ◽  
Alessandro Paoli ◽  
Ciro Santus
Keyword(s):  
Single Point ◽  
Excitation Frequency ◽  
Phase Variation ◽  
Operating Conditions ◽  
Image Correlation ◽  
Response Analysis ◽  
Full Field ◽  
Low Speed ◽  
Bladed Disk ◽  
Depth Analysis

Vibration measurements of turbomachinery components are of utmost importance to characterize the dynamic behavior of rotating machines, thus preventing undesired operating conditions. Local techniques such as strain gauges or laser Doppler vibrometers are usually adopted to collect vibration data. However, these approaches provide single-point and generally 1D measurements. The present work proposes an optical technique, which uses two low-speed cameras, a multimedia projector, and three-dimensional digital image correlation (3D-DIC) to provide full-field measurements of a bladed disk undergoing harmonic response analysis (i.e., pure sinusoidal excitation) in the kHz range. The proposed approach exploits a downsampling strategy to overcome the limitations introduced by low-speed cameras. The developed experimental setup was used to measure the response of a bladed disk subjected to an excitation frequency above 6 kHz, providing a deep insight in the deformed shapes, in terms of amplitude and phase distributions, which could not be feasible with single-point sensors. Results demonstrated the system’s effectiveness in measuring amplitudes of few microns, also evidencing blade mistuning effects. A deeper insight into the deformed shape analysis was provided by considering the phase maps on the entire blisk geometry, and phase variation lines were observed on the blades for high excitation frequency.

Dynamic analysis of an arch due to a moving load

2004 ◽  
Vol 269 (3-5) ◽  
pp. 511-534 ◽  
Author(s):  
Jong-Shyong Wu ◽  
Lieh-Kwang Chiang
Keyword(s):  
Dynamic Analysis ◽  
Moving Load

Employing Surface Roughness for Bridge-Vehicle Interaction Based Damage Detection

2011 ◽  
Author(s):  
Vesna Jaksic ◽  
Vikram Pakrashi ◽  
Alan O’Connor
Keyword(s):  
Surface Roughness ◽  
Damage Detection ◽  
Flexural Rigidity ◽  
Single Point ◽  
Point Load ◽  
Ride Quality ◽  
Breathing Crack ◽  
Bernoulli Beam ◽  
Statistical Parameters ◽  
Euler Bernoulli Beam

Damage detection and Structural Health Monitoring (SHM) for bridges employing bridge-vehicle interaction has created considerable interest in recent times. In this regard, a significant amount of work is present on the bridge-vehicle interaction models and on damage models. Surface roughness on bridges is typically used for detailing models and analyses are present relating surface roughness to the dynamic amplification of response of the bridge, the vehicle or to the ride quality. This paper presents the potential of using surface roughness for damage detection of bridge structures through bridge-vehicle interaction. The concept is introduced by considering a single point observation of the interaction of an Euler-Bernoulli beam with a breathing crack traversed by a point load. The breathing crack is treated as a nonlinear system with bilinear stiffness characteristics related to the opening and closing of crack. A uniform degradation of flexural rigidity of an Euler-Bernoulli beam traversed by a point load is also considered in this regard. The surface roughness of the beam is essentially a spatial representation of some spectral definition and is treated as a broadband white noise in this paper. The mean removed residuals of beam response are analyzed to estimate damage extent. Uniform velocity and acceleration conditions of the traversing load are investigated for the appropriateness of use. The detection and calibration of damage is investigated through cumulant based statistical parameters computed on stochastic, normalized responses of the damaged beam due to passages of the load. Possibilities of damage detection and calibration under benchmarked and non-benchmarked cases are discussed. Practicalities behind implementing this concept are also considered.

Dynamic Analysis of Elastic Link Mechanisms by Reduction of Coordinates

1972 ◽  
Vol 94 (2) ◽  
pp. 577-581 ◽  
Author(s):  
R. C. Winfrey
Keyword(s):  
Dynamic Analysis ◽  
Complete Solution ◽  
Practical Interest ◽  
Elastic Behavior ◽  
Computational Time ◽  
Linear Matrix ◽  
Considerable Saving ◽  
Matrix Differential Equations ◽  
Elastic Link ◽  
Matrix Differential

Techniques for the solution of linear matrix differential equations have previously been applied to the dynamic analysis of a mechanism. However, because the mechanism changes geometry as it rotates, a large number of solutions are necessary to predict the mechanism’s elastic behavior for even a few revolutions. Also, a designer is frequently concerned with the elastic behavior of only one point on the mechanism and has no practical interest in a complete solution. For these reasons, a method is given here for reducing the total number of coordinates to one coordinate at the point of design interest. A considerable saving in computational time is obtained since the dynamic solution involves one degree of freedom instead of many. Further, since any solution will make use of some limiting assumptions, results here indicate that, for design purposes, reducing the coordinates does not significantly affect comparable accuracy.

scholarly journals A Multidimensional and Multiscale Model for Pressure Analysis in a Reservoir-Pipe-Valve System

2018 ◽  
Author(s):  
Feng Jie Zheng ◽  
Fu Zheng Qu ◽  
Xue Guan Song
Keyword(s):  
Pressure Fluctuation ◽  
Large Scale ◽  
Three Dimensional ◽  
Industrial Process ◽  
Multiscale Model ◽  
Computational Time ◽  
Small Scale ◽  
Cfd Model ◽  
Computationally Efficient ◽  
Proposed Model

Reservoir-pipe-valve (RPV) systems are widely used in many industrial process. The pressure in an RPV system plays an important role in the safe operation of the system, especially during the sudden operation such as rapid valve opening/closing. To investigate the pressure especially the pressure fluctuation in an RPV system, a multidimensional and multiscale model combining the method of characteristics (MOC) and computational fluid dynamics (CFD) method is proposed. In the model, the reservoir is modeled by a zero-dimensional virtual point, the pipe is modeled by a one-dimensional MOC, and the valve is modeled by a three-dimensional CFD model. An interface model is used to connect the multidimensional and multiscale model. Based on the model, a transient simulation of the turbulent flow in an RPV system is conducted, in which not only the pressure fluctuation in the pipe but also the detailed pressure distribution in the valve are obtained. The results show that the proposed model is in good agreement with the full CFD model in both large-scale and small-scale spaces. Moreover, the proposed model is more computationally efficient than the CFD model, which provides a feasibility in the analysis of complex RPV system within an affordable computational time.

Sign in / Sign up

Export Citation Format

Share Document