scholarly journals A Miniaturized Triple Band Monopole Antenna for WLAN and WiMAX Applications

2015 ◽  
Vol 2015 ◽  
pp. 1-5 ◽  
Author(s):  
Yingsong Li ◽  
Wenhua Yu
Keyword(s):  
Wireless Local Area Network ◽  
Local Area Network ◽  
Local Area ◽  
Monopole Antenna ◽  
Impedance Bandwidth ◽  
Area Network ◽  
Radiation Patterns ◽  
Resonance Frequencies ◽  
Meander Line ◽  
Triple Band

A miniaturized triple band monopole antenna with a small size is proposed and its performance is investigated both numerically and experimentally for worldwide interoperability for microwave access (WiMAX) and wireless local area network (WLAN) applications. The three resonance frequencies are realized by using a toothbrush-shaped patch (TSP), a meander line (ML), and an inverted U-shaped patch (IUSP). The center frequencies of the triple bands can be controlled by adjusting the dimensions of the TSP, ML, and IUSP. Simulated and measured results are presented to demonstrate that the proposed triband monopole antenna with a good impedance bandwidth and omnidirectional radiation patterns is well suitable for WLAN and WiMAX communication applications.

scholarly journals A Rectangular Ring, Open-Ended Monopole Antenna with Two Symmetric Strips for WLAN and WiMAX Applications

2013 ◽  
Vol 2013 ◽  
pp. 1-9 ◽  
Author(s):  
Joong-Han Yoon ◽  
Young-Chul Rhee ◽  
Woo-Su Kim
Keyword(s):  
Wireless Local Area Network ◽  
Local Area Network ◽  
Local Area ◽  
Monopole Antenna ◽  
Impedance Bandwidth ◽  
Area Network ◽  
Bandwidth Requirement ◽  
Ring Open ◽  
Peak Gain ◽  
Triple Band

A triple-band rectangular ring, open-ended monopole antenna with symmetricLstrips for wireless local area network (WLAN)/Worldwide Interoperability of Microwave Access (WiMAX) applications is proposed. The proposed antenna consists of two symmetric folded arms andLstrips. Based on the concept, a prototype of the proposed triple antenna has been designed, fabricated, and tested. The numerical and experimental results demonstrated that the proposed antenna satisfied the −10 dB impedance bandwidth requirement while simultaneously covering the WLAN and WiMAX bands. Furthermore, this paper presented and discussed the 2D radiation patterns and 3D gains according to the results of the experiment. The proposed antenna’s peak gain varied between 2.17 and 4.93 dBi, and its average gain varied between −2.97 and −0.53 dBi.

Super wideband printed monopole antenna for ultra wideband applications

2015 ◽  
Vol 9 (1) ◽  
pp. 133-141 ◽  
Author(s):  
Sandeep Kumar Palaniswamy ◽  
Malathi Kanagasabai ◽  
Shrivastav Arun Kumar ◽  
M. Gulam Nabi Alsath ◽  
Sangeetha Velan ◽  
...  
Keyword(s):  
Wireless Local Area Network ◽  
Local Area Network ◽  
Ground Plane ◽  
Wide Band ◽  
Local Area ◽  
Monopole Antenna ◽  
Ultra Wideband ◽  
Impedance Bandwidth ◽  
Area Network ◽  
Compact Size

This paper presents the design, testing, and analysis of a clover structured monopole antenna for super wideband applications. The proposed antenna has a wide impedance bandwidth (−10 dB bandwidth) from 1.9 GHz to frequency over 30 GHz. The clover shaped antenna with a compact size of 50 mm × 45 mm is designed and fabricated on an FR4 substrate with a thickness of 1.6 mm. Parametric study has been performed by varying the parameters of the clover to obtain an optimum wide band characteristics. Furthermore, the prototype introduces a method of achieving super wide bandwidth by deploying fusion of elliptical patch geometries (clover shaped) with a semi elliptical ground plane, loaded with a V-cut at the ground. The proposed antenna has a 14 dB bandwidth from 5.9 to 13.1 GHz, which is suitable for ultra wideband (UWB) outdoor propagation. The prototype is experimentally validated for frequencies within and greater than UWB. Transfer function, impulse response, and group delay has been plotted in order to address the time domain characteristics of the proposed antenna with fidelity factor values. The possible applications cover wireless local area network, C-band, Ku-band, K-band operations, Worldwide Interoperability for Microwave Access, and Wireless USB.

scholarly journals Metamaterial Inspired Electrically Small Multiband Monopole Antenna Using Single DNG MTM and Ring Resonators

2021 ◽  
Author(s):  
Shiney Thankachan ◽  
Binu Paul
Keyword(s):  
Detailed Analysis ◽  
Wireless Local Area Network ◽  
Local Area Network ◽  
Local Area ◽  
Monopole Antenna ◽  
Ring Resonators ◽  
Area Network ◽  
Double Negative ◽  
Fractional Bandwidth ◽  
Triple Band

Abstract This paper proposes a new metamaterial inspired electrically small multi-band monopole antenna. The proposed antenna is capable of operating at DCS 1800 in the lower band. At the same time, in the higher band, it covers two wireless local area network (WLAN) bands at 2.4 and 5.2 GHz. This paper describes the design and detailed analysis of an electrically small (ka = 0.64 < 1) antenna with a -10dB fractional bandwidth of 2.01%, 1.64% and 2.71% for triple-band operations with centre frequencies 1.80, 2.45 and 5.17 GHz. The compactness is achieved by the application of double negative metamaterial on a monopole antenna operating at 9 GHz. The proposed antenna has an overall compact electrical size 0.14 λ0 × 0.14λ0 × 0.01 λ0 at 1.8 GHz and physical dimensions 24 × 24 × 1.6 mm3 including the ground. In this proposed ESA a second DNG structure is also incorporated to enhance its gain. This enables reliable operations at DCS 1800 and WLAN frequencies 2.4 and 5.2 GHz.

An ACS-fed F-shaped monopole antenna for GPS/WLAN/WiMAX applications

2016 ◽  
Vol 9 (5) ◽  
pp. 1123-1129 ◽  
Author(s):  
Wang Ren ◽  
Shu-Wei Hu ◽  
Chen Jiang
Keyword(s):  
Wireless Local Area Network ◽  
Local Area Network ◽  
Low Cost ◽  
Ground Plane ◽  
Local Area ◽  
Monopole Antenna ◽  
Impedance Bandwidth ◽  
Area Network ◽  
Directional Radiation ◽  
Resonant Modes

In this paper, an asymmetric coplanar strip (ACS)-fed quad-band monopole antenna for the global positioning system (GPS), wireless local area network (WLAN), and worldwide interoperability for microwave access (WiMAX) applications is proposed. It is composed of an F-shaped monopole and a partial ground plane, which are both printed on one side of a low-cost FR4 substrate with a compact volume of 40 × 20 × 1.6 mm3. By cutting an open-ended Γ-shaped slot into the F-shaped monopole, four distinct resonant modes are successfully generated. The design process, especially the geometrical configuration of the critical Γ-shaped slot is studied in detail. The proposed antenna has been fabricated and experimental results show that the −10 dB impedance bandwidth can fully cover the 1.575-GHz GPS (1.57–1.59 GHz), 2.4/5.2/5.8-GHz WLAN (2.4–2.485, 5.15–5.35, and 5.725–5.825 GHz), and 2.5/3.5/5.5-GHz WiMAX (2.50–2.69, 3.30–3.70, and 5.25–5.85 GHz) applications with nearly omni-directional radiation patterns and satisfactory gains.

scholarly journals Trapezoid Shape Patch Antenna for WLAN Application

2019 ◽  
Vol 8 (9S) ◽  
pp. 512-516
Keyword(s):  
Patch Antenna ◽  
Return Loss ◽  
Wireless Local Area Network ◽  
Local Area Network ◽  
Ground Plane ◽  
Local Area ◽  
Design Parameters ◽  
Impedance Bandwidth ◽  
Area Network ◽  
S Parameter

In this paper,CPW fed Trapezoid shape patch antenna is analyzed and investigated for Wireless Local Area Network (WLAN) application. The proposed antenna is fabricated on FR4 substrate having dimensions of 19mm ×21.2mm ×1.6mm. It resonates at 5.44 GHz frequency with peak return loss of 25.8 dB. The parametric study of proposed antenna is carried out to understand the effect of different values of ground plane on the impedance bandwidth, return loss of the antenna andalso to optimize the antenna parameters. The CPW-fed is used to enhance the bandwidth and to reduce the return loss of the antenna. The importance of different design parameters like current distribution, S-parameter, gain, and radiation pattern are studied. The results of the proposed antenna are useful for WLAN Application.

Novel dual-band multistrip monopole antenna with defected ground structure for WLAN/IMT/BLUETOOTH/WIMAX applications

2013 ◽  
Vol 6 (1) ◽  
pp. 93-100 ◽  
Author(s):  
Jaswinder Kaur ◽  
Rajesh Khanna ◽  
Machavaram Kartikeyan
Keyword(s):  
Wireless Local Area Network ◽  
Local Area Network ◽  
Design Procedure ◽  
Monopole Antenna ◽  
Dual Band ◽  
Impedance Bandwidth ◽  
Area Network ◽  
Defected Ground Structure ◽  
Ground Structure ◽  
Simulation Results

In the present work, a novel multistrip monopole antenna fed by a cross-shaped stripline comprising one vertical and two horizontal strips has been proposed for wireless local area network (WLAN)/Industrial, Scientific, and Medical band (ISM)/International Mobile Telecommunication (IMT)/BLUETOOTH/Worldwide Interoperability for Microwave Access (WiMAX) applications. The designed antenna has a small overall size of 20 × 30 mm2. The goal of this paper is to use defected ground structure (DGS) in the proposed antenna design to achieve dual-band operation with appreciable impedance bandwidth at the two operating modes satisfying several communication standards simultaneously. The antenna was simulated using Computer Simulation Technology Microwave Studio (CST MWS) V9 based on the finite integration technique (FIT) with perfect boundary approximation. Finally, the proposed antenna was fabricated and some performance parameters were measured to validate against simulation results. The design procedure, parametric analysis, simulation results along with measurements for this multistrip monopole antenna using DGS operating simultaneously at WLAN (2.4/5.8 GHz), IMT (2.35 GHz), BLUETOOTH (2.45 GHz), and WiMAX (5.5 GHz) are presented.

scholarly journals Design of dual band slotted reconfigurable antenna using electronic switching circuit

2021 ◽  
Vol 24 (1) ◽  
pp. 386
Author(s):  
Mustafa M. Al-Saeedi ◽  
Ahmed A. Hashim ◽  
Omer Al-Bayati ◽  
Ali Salim Rasheed ◽  
Rasool Hasan Finjan
Keyword(s):  
Wireless Local Area Network ◽  
Local Area Network ◽  
Ground Plane ◽  
Local Area ◽  
Dual Band ◽  
Area Network ◽  
Radiation Patterns ◽  
Directional Radiation ◽  
Constant E ◽  
Lower Complexity

This paper proposes a dual band reconfigurable microstrip slotted antenna for supporting the wireless local area network (WLAN) and worldwide interoperability for microwave access (WiMAX) applications, providing coverage where both directive and omni-directive radiations are needed. The design consists of a feedline, a ground plane with two slots and two gaps between them to provide the switching capability and a 1.6 mm thick flame retardant 4 (FR4) substrate (dielectric constant Ɛ=4.3, loss tangent δ=0.019), modeling an antenna size of 30x35x1.6 mm3. The EM simulation, which was carried out using the connected speech test (CST) studio suite 2017, generated dual wide bands of 40% (2-3 GHz) with -55 dB of S11 and 24% (5.2-6.6 GHz) higher than its predecessors with lower complexity and -60 dB of S11 in addition to the radiation pattern versatility while maintaining lower power consumption. Moreover, the antenna produced omnidirectional radiation patterns with over than 40% bandwith at 2.4 GHz and directional radiation patterns with 24% bandwith at the 5.8 GHz band. Furthermore, a comprehensive review of previously proposed designs has also been made and compared with current work.

scholarly journals Planar EBG Loaded UWB Monopole Antenna with Triple Notch Characteristics

2021 ◽  
Vol 11 (4) ◽  
pp. 294-304
Author(s):  
Vamshi Kollipara ◽  
Samineni Peddakrishna ◽  
Jayendra Kumar
Keyword(s):  
Wireless Local Area Network ◽  
Local Area Network ◽  
Coupling Effect ◽  
Monopole Antenna ◽  
Ultra Wideband ◽  
Area Network ◽  
Distribution Analysis ◽  
Archimedean Spiral ◽  
Feed Line ◽  
Triple Band

A triple band-notched ultra-wideband (UWB) monopole antenna using a planar electromagnetic bandgap (EBG) design is proposed. The EBG unit cell composed by an Archimedean spiral and inter-digital capacitance demonstrates the notch frequencies. The antenna with EBG cells near the feed line occupies only 30 × 36 mm2 with triple band-rejection characteristics. The three notched bands at 4.2 GHz, 5.2 GHz, and 9.1 GHz can be used in C-band satellite downlink, wireless local area network (WLAN), and X-band radio location for naval radar or military required applications. In addition, the proposed design is flexible to tune different notched bands by altering the EBG dimensions. The parametric analysis is studied in details after placing the EBG unit cells near the feed line to show the coupling effect. The input impedance and surface current distribution analysis are also analyzed to understand the effect of EBG at notch frequencies. The proposed design prototype is fabricated and characterized. A fairly considerable agreement is observed between simulated and measured results.

scholarly journals A CPW-Fed Rectangular Ring Monopole Antenna for WLAN Applications

2014 ◽  
Vol 2014 ◽  
pp. 1-6 ◽  
Author(s):  
Sangjin Jo ◽  
Hyunjin Choi ◽  
Beomsoo Shin ◽  
Sangyeol Oh ◽  
Jaehoon Lee
Keyword(s):  
Wireless Local Area Network ◽  
Local Area Network ◽  
Coplanar Waveguide ◽  
Ground Plane ◽  
Local Area ◽  
Monopole Antenna ◽  
Dual Band ◽  
Area Network ◽  
Feed Line ◽  
Compact Size

We present a simple coplanar waveguide- (CPW-) fed rectangular ring monopole antenna designed for dual-band wireless local area network (WLAN) applications. The antenna is based on a simple structure composed of a CPW feed line and a rectangular ring. Dual-band WLAN operation can be achieved by controlling the distance between the rectangular ring and the ground plane of the CPW feed line, as well as the horizontal vertical lengths of the rectangular ring. Simulated and measured data show that the antenna has a compact size of21.4×59.4 mm2, an impedance bandwidths of 2.21–2.70 GHz and 5.04–6.03 GHz, and a reflection coefficient of less than −10 dB. The antenna also exhibits an almost omnidirectional radiation pattern. This simple compact antenna with favorable frequency characteristics therefore is attractive for applications in dual-band WLAN.

Sign in / Sign up

Export Citation Format

Share Document