scholarly journals Research on Gas Exploration Shock Wave Spread Law via One-Way Bifurcation Pipeline

2018 ◽  
Vol 2018 ◽  
pp. 1-8
Author(s):  
Zhi-wei Jia ◽  
Bo Li ◽  
Sheng-ming Xu
Keyword(s):  
Shock Wave ◽  
Numerical Modeling ◽  
Wave Attenuation ◽  
Research Result ◽  
Experimental System ◽  
Calculation Model ◽  
Attenuation Coefficients ◽  
Bifurcation Angle ◽  
The One ◽  
Important Significance

In order to research on gas exploration shock wave spread law via a one-way bifurcation pipeline, the gas exploration pipeline experimental system and numerical calculation model were established. By adopting the comparative analysis of experiments and numerical modeling, it conducted researches on the attenuation and shunt characteristics of the gas exploration shock wave via the one-way bifurcation pipeline and obtained the computational formulas for shock wave attenuation coefficients of branch pipelines and straight pipelines and shock wave shunt coefficients of branch pipelines. As the research result showed that when the pipeline bifurcation angle was fixed, the larger the shock wave overpressure was, the larger the overpressure attenuation coefficients of straight pipelines and branch pipelines were. When the shockwave overpressure was fixed and the one-way bifurcation pipeline angle increased, the shock wave overpressure attenuation coefficients of branch pipelines would be aggregated and the shock wave overpressure attenuation coefficients of straight pipelines would be decreased, which reflected the shunting action of the shock wave in branch pipelines and straight pipelines; the larger the branch pipeline bifurcation angle, the smaller the shunting action for straight pipelines. The research achievements in the paper had important significance for the assessment of structures damage in mine laneways gas exploration accidents and installation of the antiexploration manhole cover, which further enriched gas exploration spread theory.

Influence Analysis of Roadway Friction on Shock Wave Attenuation

2012 ◽  
Vol 178-181 ◽  
pp. 1619-1622
Author(s):  
Ning He ◽  
Bin Qin
Keyword(s):  
Shock Wave ◽  
Friction Coefficient ◽  
Wave Attenuation ◽  
Calculation Model ◽  
Wall Friction ◽  
Tunnel Wall ◽  
Shock Wave Attenuation ◽  
Roughness Elements ◽  
Simulation Calculation ◽  
The Impact

Friction is the extremely important factor when considering the interaction between the shock wave and the tunnel wall. But so far, the impact of wall friction on the shock wave is mainly measured by experimental methods. This paper mainly discusses the effect of wall friction on the shock wave attenuation, without considering roughness, roughness elements, the viscosity of air, and the complex relationship between them; the numerical simulation calculation model is established with DYNA calculation software; the influence law of friction coefficient on tunnel shock wave propagation and attenuation is given based on friction coefficient between air medium and tunnel wall, so as to provide guidance to mining, reduce the impact of tunnel explosion shock wave on personnel and equipment and provide a design basis for shaft safety works.

The Numerical Modeling of Spherical Explosion in the Foam

2016 ◽  
Vol 11 (1) ◽  
pp. 60-65 ◽  
Author(s):  
R.Kh. Bolotnova ◽  
E.F. Gainullina
Keyword(s):  
Shock Wave ◽  
Numerical Modeling ◽  
Initial Pressure ◽  
Water Volume ◽  
Symmetric Model ◽  
Two Phase ◽  
Experimental Conditions ◽  
Initial Water ◽  
Aqueous Foam ◽  
Spherical Explosion

The spherical explosion propagation process in aqueous foam with the initial water volume content α10=0.0083 corresponding to the experimental conditions is analyzed numerically. The solution method is based on the one-dimensional two-temperature spherically symmetric model for two-phase gas-liquid mixture. The numerical simulation is built by the shock capturing method and movable Lagrangian grids. The amplitude and the width of the initial pressure pulse are found from the amount of experimental explosive energy. The numerical modeling results are compared to the real experiment. It’s shown, that the foam compression in the shock wave leads to the significant decrease in velocity and in amplitude of the shock wave.

scholarly journals A Lab-Scale Experiment Approach to the Measurement of Wall Pressure from Near-Field under Water Explosions by a Hopkinson Bar

2018 ◽  
Vol 2018 ◽  
pp. 1-15 ◽  
Author(s):  
Xiongwei Cui ◽  
Xiongliang Yao ◽  
Yingyu Chen
Keyword(s):  
Shock Wave ◽  
Near Field ◽  
Underwater Explosion ◽  
Experimental System ◽  
Hopkinson Bar ◽  
Wall Pressure ◽  
Pressure Loading ◽  
Target Plate ◽  
Wave Pressure ◽  
Shock Wave Pressure

Direct measurement of the wall pressure loading subjected to the near-field underwater explosion is of great difficulty. In this article, an improved methodology and a lab-scale experimental system are proposed and manufactured to assess the wall pressure loading. In the methodology, a Hopkinson bar (HPB), used as the sensing element, is inserted through the hole drilled on the target plate and the bar’s end face lies flush with the loaded face of the target plate to detect and record the pressure loading. Furthermore, two improvements have been made on this methodology to measure the wall pressure loading from a near-field underwater explosion. The first one is some waterproof units added to make it suitable for the underwater environment. The second one is a hard rubber cylinder placed at the distal end, and a pair of ropes taped on the HPB is used to pull the HPB against the cylinder hard to ensure the HPB’s end face flushes with loaded face of the target plate during the bubble collapse. To validate the pressure measurement technique based on the HPB, an underwater explosion between two parallelly mounted circular target plates is used as the validating system. Based on the assumption that the shock wave pressure profiles at the two points on the two plates which are symmetrical to each other about the middle plane of symmetry are the same, it was found that the pressure obtained by the HPB was in excellent agreement with pressure transducer measurements, thus validating the proposed technique. To verify the capability of this improved methodology and experimental system, a series of minicharge underwater explosion experiments are conducted. From the recorded pressure-time profiles coupled with the underwater explosion evolution images captured by the HSV camera, the shock wave pressure loading and bubble-jet pressure loadings are captured in detail at 5  mm, 10  mm, …, 30  mm stand-off distances. Part of the pressure loading of the experiment at 35  mm stand-off distance is recorded, which is still of great help and significance for engineers. Especially, the peak pressure of the shock wave is captured.

scholarly journals Relativistic shock waves induced by ultra-high laser pressure

2014 ◽  
Vol 32 (2) ◽  
pp. 243-251 ◽  
Author(s):  
Shalom Eliezer ◽  
Noaz Nissim ◽  
Erez Raicher ◽  
José Maria Martínez-Val
Keyword(s):  
Shock Wave ◽  
Shock Waves ◽  
Laser Irradiance ◽  
Compression Pressure ◽  
Relativistic Shock ◽  
Electron Positron ◽  
High Laser ◽  
Wave Compression ◽  
The One ◽  
First Time

AbstractThis paper analyzes the one dimensional shock wave created in a planar target by the ponderomotive force induced by very high laser irradiance. The laser-induced relativistic shock wave parameters, such as compression, pressure, shock wave and particle flow velocities, sound velocity and temperature are calculated here for the first time in the context of relativistic hydrodynamics. For solid targets and laser irradiance of about 2 × 1024 W/cm2, the shock wave velocity is larger than 50% of the speed of light, the shock wave compression is larger than 4 (usually of the order of 10) and the targets have a pressure of the order of 1015 atmospheres. The estimated temperature can be larger than 1 MeV in energy units and therefore very excited physics (like electron positron formation) is expected in the shocked area. Although the next generation of lasers might allow obtaining relativistic shock waves in the laboratory this possibility is suggested in this paper for the first time.

A simple constitutive model for predicting the pressure histories developed behind rigid porous media impinged by shock waves

2013 ◽  
Vol 718 ◽  
pp. 507-523 ◽  
Author(s):  
O. Ram ◽  
O. Sadot
Keyword(s):  
Shock Wave ◽  
Porous Medium ◽  
Porous Media ◽  
Shock Waves ◽  
Constitutive Model ◽  
Wave Attenuation ◽  
Front Face ◽  
Viscous Effects ◽  
Pressure History ◽  
Target Wall

AbstractShock wave attenuation by means of rigid porous media is often applied when protective structures are dealt with. The passage of a shock wave through a layer of porous medium is accompanied by diffractions and viscous effects that attenuate and weaken the transmitted shock, thus reducing the load that develops on the target wall that is placed behind the protective layer. In the present study, the parameters governing the pressure build-up on the target wall are experimentally investigated using a shock tube facility. Different porous samples are impinged by normal shock waves of various strengths and the subsequent pressure histories that are developed on the target wall are recorded. In addition, different standoff distances from the target wall are investigated. Assuming that the flow through the porous medium is close to being isentropic enabled us to develop a general constitutive model for predicting the pressure history developed on the target wall. This model can be applied to predict the pressure build-up on the target wall for any pressure history that is imposed on the front face of the porous sample without the need to conduct numerous experiments. Results obtained by other investigators are found to be in very good agreement with the predictions of the presently developed constitutive model.

scholarly journals Plasmodium infection decreases fecundity and increases survival of mosquitoes

2012 ◽  
Vol 279 (1744) ◽  
pp. 4033-4041 ◽  
Author(s):  
J. Vézilier ◽  
A. Nicot ◽  
S. Gandon ◽  
A. Rivero
Keyword(s):  
Life History ◽  
Insecticide Resistance ◽  
Life History Traits ◽  
Experimental System ◽  
Adaptive Strategy ◽  
Genetic Variations ◽  
The Other ◽  
Plasmodium Infection ◽  
Trade Off ◽  
The One

Long-lived mosquitoes maximize the chances of Plasmodium transmission. Yet, in spite of decades of research, the effect of Plasmodium parasites on mosquito longevity remains highly controversial. On the one hand, many studies report shorter lifespans in infected mosquitoes. On the other hand, parallel (but separate) studies show that Plasmodium reduces fecundity and imply that this is an adaptive strategy of the parasite aimed at redirecting resources towards longevity. No study till date has, however, investigated fecundity and longevity in the same individuals to see whether this prediction holds. In this study, we follow for both fecundity and longevity in Plasmodium- infected and uninfected mosquitoes using a novel, albeit natural, experimental system. We also explore whether the genetic variations that arise through the evolution of insecticide resistance modulate the effect of Plasmodium on these two life-history traits. We show that (i) a reduction in fecundity in Plasmodium- infected mosquitoes is accompanied by an increase in longevity; (ii) this increase in longevity arises through a trade-off between reproduction and survival; and (iii) in insecticide-resistant mosquitoes, the slope of this trade-off is steeper when the mosquito is infected by Plasmodium (cost of insecticide resistance).

Shock Wave Attenuation by Perforated Plates with Various Hole Sizes

1977 ◽  
Author(s):  
Charles Kingery ◽  
Richard Pearson ◽  
George Coulter
Keyword(s):  
Shock Wave ◽  
Wave Attenuation ◽  
Perforated Plates ◽  
Shock Wave Attenuation
Sign in / Sign up

Export Citation Format

Share Document