scholarly journals DOA Estimation Method in Multipath Environment for Passive Bistatic Radar

2019 ◽  
Vol 2019 ◽  
pp. 1-9 ◽  
Author(s):  
Panhe Hu ◽  
Qinglong Bao ◽  
Zengping Chen
Keyword(s):  
Signal To Noise Ratio ◽  
Estimation Method ◽  
Doa Estimation ◽  
Estimation Accuracy ◽  
Bistatic Radar ◽  
Spatial Difference ◽  
Coherent Signals ◽  
Vhf Radar ◽  
Multipath Environment ◽  
Passive Bistatic Radar

Direction-of-arrival (DOA) estimation in multipath environment is an important issue for passive bistatic radar (PBR) using frequency agile phased array VHF radar as illuminator of opportunity. Under such scenario, the main focus of this paper is to cope with the closely spaced uncorrelated and coherent signals in low signal-to-noise ratio and limited snapshots. Making full use of the characteristics of moduli of eigenvalues, the DOAs of the uncorrelated signals are firstly estimated. Afterwards, their contributions are eliminated by means of spatial difference technique. Finally, in order to improve resolution and accuracy DOA estimation of remaining coherent signals while avoiding the cross-terms effect, a new beamforming solution based iterative adaptive approach (IAA) is proposed to deal with a reconstructed covariance matrix. The proposed method combines the advantages of both spatial difference method and the IAA algorithm while avoiding their shortcomings. Simulation results validate its effectiveness; meanwhile, the good performances of the proposed method in terms of resolution probability, detection probability, and estimation accuracy are demonstrated by comparison with the existing methods.

scholarly journals A Novel ULA-Difference-Coarray-Based DOA Estimation Method for General Coherent Signals

2020 ◽  
Vol 2020 ◽  
pp. 1-13
Author(s):  
Zhang Chen ◽  
Hao Wu ◽  
Yongxiang Liu
Keyword(s):  
Good Accuracy ◽  
Linear Array ◽  
Estimation Method ◽  
Doa Estimation ◽  
Estimation Accuracy ◽  
Coherent Signals ◽  
Low Snr ◽  
Sample Covariance ◽  
Lower Complexity ◽  
The Difference

In this article, a difference-coarray-based direction of arrival (DOA) method is introduced, which utilizes the uniform linear array (ULA) in a novel fashion to address the problem of DOA estimation for coherent signals. Inspired by the coarray-based estimators employed in cases of sparse arrays, we convert the sample covariance matrix of the observed signals into the difference coarray domain and process the signals using a spatial smoothing technique. The proposed method exhibits good accuracy and robustness in both the uncorrelated and coherent cases. Numerical simulations verify that the ULA difference coarray- (UDC-) based method can achieve good DOA estimation accuracy even when the SNR is very low. In addition, the UDC-based method is insensitive to the number of snapshots. Under extremely challenging conditions, the proposed UDC-ES-DOA method is preferred because of its outstanding robustness, while the UDC-MUSIC method is suitable for most moderate cases of lower complexity. Due to its demonstrated advantages, the proposed method is a promising and competitive solution for practical DOA estimation, especially for low-SNR or snapshot-limited applications.

scholarly journals Tensor Approach to DOA Estimation of Coherent Signals with Electromagnetic Vector-Sensor Array

Sensors ◽  
2018 ◽  
Vol 18 (12) ◽  
pp. 4320 ◽  
Author(s):  
Ming-Yang Cao ◽  
Xingpeng Mao ◽  
Xiaozhuan Long ◽  
Lei Huang
Keyword(s):  
Estimation Method ◽  
Doa Estimation ◽  
Parameters Estimation ◽  
Estimation Accuracy ◽  
Coherent Signals ◽  
Rectangular Array ◽  
Vector Sensor ◽  
Electromagnetic Vector Sensor ◽  
Vector Sensors ◽  
Uniform Rectangular Array

This paper addresses the direction-of-arrival (DOA) estimation problem using a uniform rectangular array with electromagnetic vector-sensors in correlated/coherent signal environments. The polarization information is separated from the steering matrix to decorrelate the signals. By developing a tensorial structured received measurements of the array, we propose a tensor-based eigenvector DOA estimation method. Then we apply the forward-backward averaging to the tensor since it obeys the centro-Hermitian structure. In addition, a tensor-based polarization parameters estimation method is presented. The proposed algorithms are superior to the state-of-the-art algorithms in terms of estimation accuracy of coherent signals while only demand a modest computation burden comparing with the latter ones. Simulation results are given to demonstrate the effectiveness of the proposed methods under different scenarios.

scholarly journals Range-Doppler Domain-Based DOA Estimation Method for FM-Band Passive Bistatic Radar

IEEE Access ◽  
2020 ◽  
Vol 8 ◽  
pp. 56880-56891
Author(s):  
Geun-Ho Park ◽  
Young-Kwang Seo ◽  
Hyoung-Nam Kim
Keyword(s):  
Estimation Method ◽  
Doa Estimation ◽  
Bistatic Radar ◽  
Passive Bistatic Radar

scholarly journals Low Complexity Sparse Beamspace DOA Estimation Via Single Measurement Vectors for Uniform Circular Array

2021 ◽  
Author(s):  
Di Zhao ◽  
Weijie Tan ◽  
Zhongliang Deng ◽  
Gang Li
Keyword(s):  
Optimization Problem ◽  
Signal To Noise Ratio ◽  
Estimation Method ◽  
Doa Estimation ◽  
Low Complexity ◽  
Estimation Methods ◽  
Circular Array ◽  
Single Measurement ◽  
Signal Model ◽  
Convex Optimization Problem

Abstract In this paper, we present a low complexity beamspace direction-of-arrival (DOA) estimation method for uniform circular array (UCA), which is based on the single measurement vectors (SMVs) via vectorization of sparse covariance matrix. In the proposed method, we rstly transform the signal model of UCA to that of virtual uniform linear array (ULA) in beamspace domain using the beamspace transformation (BT). Subsequently, by applying the vectorization operator on the virtual ULA-like array signal model, a new dimension-reduction array signal model consists of SMVs based on Khatri-Rao (KR) product is derived. And then, the DOA estimation is converted to the convex optimization problem. Finally, simulations are carried out to verify the eectiveness of the proposed method, the results show that without knowledge of the signal number, the proposed method not only has higher DOA resolution than subspace-based methods in low signal-to-noise ratio (SNR), but also has much lower computational complexity comparing other sparse-like DOA estimation methods.

A DOA Estimation Method With Kronecker Subspace for Coherent Signals

2018 ◽  
Vol 22 (11) ◽  
pp. 2306-2309 ◽  
Author(s):  
Masaaki Inoue ◽  
Kazunori Hayashi ◽  
Hiroki Mori ◽  
Toshihisa Nabetani
Keyword(s):  
Estimation Method ◽  
Doa Estimation ◽  
Coherent Signals

scholarly journals Central DOA Estimation Method for Exponential-Type Coherent Distributed Source Based on Fourth-Order Cumulant

2020 ◽  
Vol 2020 ◽  
pp. 1-11
Author(s):  
Hao Li ◽  
Weijia Cui ◽  
Bin Ba ◽  
Haiyun Xu ◽  
Yankui Zhang
Keyword(s):  
Fourth Order ◽  
Exponential Type ◽  
Complexity Analysis ◽  
Estimation Method ◽  
Doa Estimation ◽  
Estimation Accuracy ◽  
Distributed Source ◽  
Sparse Array ◽  
Fourth Order Cumulant ◽  
Array Aperture

The performance of direction-of-arrival (DOA) estimation for sparse arrays applied to the distributed source is worse than that applied to the point source model. In this paper, we introduce the coprime array with a large array aperture into the DOA estimation algorithm of the exponential-type coherent distributed source. In particular, we focus on the fourth-order cumulant (FOC) of the received signal which can provide more useful information when the signal is non-Gaussian than when it is Gaussian. The proposed algorithm extends the array aperture by combining the sparsity of array space domain with the fourth-order cumulant characteristics of signals, which improves the estimation accuracy and degree of freedom (DOF). Firstly, the signal-received model of the sparse array is established, and the fourth-order cumulant matrix of the received signal of the sparse array is calculated based on the characteristics of distributed sources, which extend the array aperture. Then, the virtual array is constructed by the sum aggregate of physical array elements, and the position set of its maximum continuous part array element is obtained. Finally, the center DOA estimation of the distributed source is realized by the subspace method. The accuracy and DOF of the proposed algorithm are higher than those of the distributed signal parameter estimator (DSPE) algorithm and least-squares estimation signal parameters via rotational invariance techniques (LS-ESPRIT) algorithm when the array elements are the same. Complexity analysis and numerical simulations are provided to demonstrate the superiority of the proposed method.

scholarly journals DOA Estimation for UCAs Based on Virtual Subarray Beamforming Technique

2018 ◽  
Vol 232 ◽  
pp. 01012
Author(s):  
Bo Xu ◽  
Zhigang Huang
Keyword(s):  
Signal To Noise Ratio ◽  
Estimation Method ◽  
Direction Of Arrival ◽  
Doa Estimation ◽  
Signal To Noise ◽  
Circular Arrays ◽  
Noise Ratio ◽  
Subarray Beamforming ◽  
Beamforming Technique

Direction-of-arrival (DOA) estimation is always a hotspot research in the fields of radar, sonar, communication and so on. And uniform circular arrays (UCAs) are more attractive in the context of DOA estimation since their symmetrical structures have potential to provide two directions coverage. This paper proposed a new DOA estimation method for UCAs via virtual subarray beamforming technique. The method would provide an acceptable DOA estimate even if the number of sources is great than the number of array elements. Also, the performance of the proposed method would hold good when the snapshot length or the signal-to-noise ratio (SNR) is small. Simulations show that the proposed technique offers significantly improved estimation resolution, capacity, and accuracy relative to the existing techniques.

scholarly journals AR Model-Based Direction-of-Arrival Estimation of Coherent Signals in the Presence of Unknown Mutual Coupling

2013 ◽  
Vol 2013 ◽  
pp. 1-6
Author(s):  
Zhi-Chao Sha ◽  
Zhang-Meng Liu ◽  
Zhi-Tao Huang ◽  
Yi-Yu Zhou
Keyword(s):  
Mutual Coupling ◽  
Direction Of Arrival ◽  
Doa Estimation ◽  
Ar Model ◽  
Estimation Accuracy ◽  
Direction Of Arrival Estimation ◽  
Coherent Signals ◽  
Model Based ◽  
Mixing Matrix ◽  
Simulation Results

This paper addresses the problem of direction-of-arrival (DOA) estimation of coherent signals in the presence of unknown mutual coupling, and an autoregression (AR) model-based method is proposed. The effects of mutual coupling can be eliminated by the inherent mechanism of the proposed algorithm, so the DOAs can be accurately estimated without any calibration sources. After the mixing matrix is estimated by independent component analysis (ICA), several parameter equations are established upon the mixing matrix. Finally, all DOAs of coherent signals are estimated by solving these equations. Compared with traditional methods, the proposed method has higher angle resolution and estimation accuracy. Simulation results demonstrate the effectiveness of the algorithm.

Sign in / Sign up

Export Citation Format

Share Document