scholarly journals Low Complexity Sparse Beamspace DOA Estimation Via Single Measurement Vectors for Uniform Circular Array

2021 ◽  
Author(s):  
Di Zhao ◽  
Weijie Tan ◽  
Zhongliang Deng ◽  
Gang Li
Keyword(s):  
Optimization Problem ◽  
Signal To Noise Ratio ◽  
Estimation Method ◽  
Doa Estimation ◽  
Low Complexity ◽  
Estimation Methods ◽  
Circular Array ◽  
Single Measurement ◽  
Signal Model ◽  
Convex Optimization Problem

Abstract In this paper, we present a low complexity beamspace direction-of-arrival (DOA) estimation method for uniform circular array (UCA), which is based on the single measurement vectors (SMVs) via vectorization of sparse covariance matrix. In the proposed method, we rstly transform the signal model of UCA to that of virtual uniform linear array (ULA) in beamspace domain using the beamspace transformation (BT). Subsequently, by applying the vectorization operator on the virtual ULA-like array signal model, a new dimension-reduction array signal model consists of SMVs based on Khatri-Rao (KR) product is derived. And then, the DOA estimation is converted to the convex optimization problem. Finally, simulations are carried out to verify the eectiveness of the proposed method, the results show that without knowledge of the signal number, the proposed method not only has higher DOA resolution than subspace-based methods in low signal-to-noise ratio (SNR), but also has much lower computational complexity comparing other sparse-like DOA estimation methods.

scholarly journals Low complexity sparse beamspace DOA estimation via single measurement vectors for uniform circular array

2021 ◽  
Vol 2021 (1) ◽  
Author(s):  
Di Zhao ◽  
Weijie Tan ◽  
Zhongliang Deng ◽  
Gang Li
Keyword(s):  
Signal To Noise Ratio ◽  
Estimation Method ◽  
Doa Estimation ◽  
Low Complexity ◽  
Estimation Methods ◽  
Observation Data ◽  
Circular Array ◽  
Single Measurement ◽  
Signal Model ◽  
Element Space

AbstractIn this paper, we present a low complexity sparse beamspace direction-of-arrival (DOA) estimation method for uniform circular array (UCA). In the proposed method, we firstly use the beamspace transformation (BT) to transform the signal model of UCA in element-space domain to that of virtual uniform linear array (ULA) in beamspace domain. Subsequently, by applying the vectoring operator on the virtual ULA-like array signal model, a novel dimension-reduction sparse beamspace signal model is derived based on Khatri-Rao (KR) product, the observation data of which is represented by the single measurement vectors (SMVs) via vectorization of sparse covariance matrix. And then, the DOA estimation is formulated as a convex optimization problem by following the concept of a sparse-signal-representation (SSR) of the SMVs. Finally, simulations are carried out to validate the effectiveness of the proposed method. The results show that without knowledge of the number of signals, the proposed method not only has higher DOA resolution than the subspace-based methods in low signal-to-noise ratio (SNR), but also has far lower computational complexity than other sparse-like DOA estimation methods.

scholarly journals Minimum Array Elements for Resolution of Several Direction of Arrival Estimation Methods in Various Noise-Level Environments

2018 ◽  
Vol 2 ◽  
pp. 87-94
Author(s):  
Ismail El Ouargui ◽  
Said Safi ◽  
Miloud Frikel
Keyword(s):  
Gaussian Noise ◽  
Noise Level ◽  
Signal To Noise Ratio ◽  
Additive White Gaussian Noise ◽  
Direction Of Arrival ◽  
Estimation Algorithm ◽  
Doa Estimation ◽  
Estimation Methods ◽  
Minimum Number ◽  
Informative Signals

The resolution of a Direction of Arrival (DOA) estimation algorithm is determined based on its capability to resolve two closely spaced signals. In this paper, authors present and discuss the minimum number of array elements needed for the resolution of nearby sources in several DOA estimation methods. In the real world, the informative signals are corrupted by Additive White Gaussian Noise (AWGN). Thus, a higher signal-to-noise ratio (SNR) offers a better resolution. Therefore, we show the performance of each method by applying the algorithms in different noise level environments.

SAMPLE CLOCK OFFSET COMPENSATION IN THE FIFTH-GENERATION NEW RADIO UPLINK

2021 ◽  
Author(s):  
О.Г. ПОНОМАРЕВ ◽  
М. АСАФ
Keyword(s):  
Signal To Noise Ratio ◽  
Radio Channel ◽  
Estimation Method ◽  
Estimation Methods ◽  
Fifth Generation ◽  
New Radio ◽  
Shared Channel ◽  
Wide Range ◽  
Offset Compensation ◽  
Clock Offset

Рассмотрена проблема коррекции искажений OFDM-сигнала, вызванных смещением частоты дискретизации сигнала в приемном и передающем устройствах системы сотовой связи пятого поколения. Предлагаемый метод компенсации смещения частоты дискретизации основывается на прямой коррекции искажений, вносимых в передаваемый сигнал наличием смещения, и не предполагает какой-либо оценки величины смещения. Метод предназначен для коррекции сигналов в восходящем канале системы сотовой связи пятого поколения и основывается на использовании референсных сигналов, рекомендованных стандартами 3GPP. Результаты численного моделирования показали, что использование предлагаемого метода позволяет повысить эффективность передачи данных по многолучевому радиоканалу более чем на 15% в широком диапазоне значений отношения сигнал/шум. 5G-NR, CP-OFDM, synchronization, sample clock offset, PUSCH. О The paper investigates the issue of sampling clock offset ( SCO) in the fifth generation new radio systems. Due to the imperfect SCO estimation methods, the correction methods relying on the SCO estimation are not perfect, so the proposed method directly corrects the effect of SCO without using any kind of estimation method. Our method is designed to correct the signals in the physical uplink shared channel (PUSCH). The method uses reference signals as recommended by the 3rd generation partnership project (3GPP) standards. The results of the numerical simulation show that the use of the proposed method increases the efficiency of data transmission over the multipath radio channel by more than 15% in a wide range of signal-to-noise ratio values.

scholarly journals DOA Estimation for UCAs Based on Virtual Subarray Beamforming Technique

2018 ◽  
Vol 232 ◽  
pp. 01012
Author(s):  
Bo Xu ◽  
Zhigang Huang
Keyword(s):  
Signal To Noise Ratio ◽  
Estimation Method ◽  
Direction Of Arrival ◽  
Doa Estimation ◽  
Signal To Noise ◽  
Circular Arrays ◽  
Noise Ratio ◽  
Subarray Beamforming ◽  
Beamforming Technique

Direction-of-arrival (DOA) estimation is always a hotspot research in the fields of radar, sonar, communication and so on. And uniform circular arrays (UCAs) are more attractive in the context of DOA estimation since their symmetrical structures have potential to provide two directions coverage. This paper proposed a new DOA estimation method for UCAs via virtual subarray beamforming technique. The method would provide an acceptable DOA estimate even if the number of sources is great than the number of array elements. Also, the performance of the proposed method would hold good when the snapshot length or the signal-to-noise ratio (SNR) is small. Simulations show that the proposed technique offers significantly improved estimation resolution, capacity, and accuracy relative to the existing techniques.

scholarly journals Channel Estimation methods with low complexity for 3GPP/LTE

2014 ◽  
Vol Volume 18, 2014 ◽  
Author(s):  
Moussa Diallo ◽  
Maryline Helard
Keyword(s):  
Channel Estimation ◽  
Estimation Method ◽  
Low Complexity ◽  
Estimation Methods ◽  
Ofdm Systems ◽  
Border Effect ◽  
Noise Component ◽  
System Parameters ◽  
Truncated Svd ◽  
Truncation Threshold

International audience OFDM based pilots channel estimation methods with processing into the transform domain appear attractive owing to their capacity to highly reduce the noise component effect. However, in current OFDM systems, null subcarriers are placed at the edge of the spectrum in order to assure isolation from interfering signals in neighboring frequency bands; and the presence of these null carriers may lead, if not taken into account, to serious degradation of the estimated channel responses due to the “border effect” phenomenon. In this paper an improved algorithm based on truncated SVD is proposed in order to correctly support the case of null carriers at border spectrum. A method for optimizing the truncation threshold whatever the system parameters is also proposed. To make the truncated SVD channel estimation method applicable to any SISO or MIMO OFDM system and whatever the system parameters, a complexity reduction algorithm based on the distribution of the power in the transfer matrix (based on DFT or DCT) is proposed. Les techniques d’estimation de canal, basée sur des symboles pilotes, par passage dansun domaine de tranfert sont très attractives pour les systèmes de télécommunications utilisant l’OFDM.Cependant, elles montrent des limites pour les systèmes de télécommunications, où un ensemble desous-porteuses de garde, est inséré sur les bords du spectre dans le but d’éviter tout recouvrementspectral avec d’autres applications utilisant des bandes voisines. Ces sous-porteuses de gardeont selon leur nombre tendance à dégrader fortement les performances de ces estimateurs. Nousproposons, dans un premier temps, une optimisation qui permet d’améliorer considérablement lesperformances de ces estimateurs quels que soit le nombre de porteuses de garde. Dans un secondtemps, pour de rendre l’estimateur proposé attractif pour les constructeurs, nous avons proposé unetechnique permettant de réduire leur complexité de réalisation de manière notable.

scholarly journals Accurate Direction-of-Arrival Estimation Method based on Space-Time Modulated Metasurface

2022 ◽  
Author(s):  
Mengmeng Li
Keyword(s):  
Plane Wave ◽  
Incident Angle ◽  
Estimation Method ◽  
Time Estimation ◽  
Direction Of Arrival ◽  
Doa Estimation ◽  
Space Time ◽  
Estimation Methods ◽  
Estimation Accuracy ◽  
Hardware Complexity

In this paper, we present a metasurface-based Direction of Arrival (DoA) estimation method that exploits the properties of space-time modulated reflecting metasurfaces to estimate in real-time the impinging angle of an illuminating monochromatic plane wave. The approach makes use of the amplitude unbalance of the received fields at broadside at the frequencies of the two first-order harmonics generated by the interaction between the incident plane wave and the modulated metasurface. Here, we first describe analytically how to generate the desired higher-order harmonics in the reflected spectrum and how to realize the breaking of the spatial symmetry of each order harmonic scattering pattern. Then, the one dimensional (1D) omnidirectional incident angle can be analytically computed using +1st and -1st order harmonics. The approach is also extended to 2D DoA estimation by using two orthogonally arranged 1D DoA modulation arrays. The accuracy of 1D DoA estimation is verified through full-wave numerical simulations. Compared to conventional DoA estimation methods, the proposed approach simplifies the computation and hardware complexity, ensuring at the same time estimation accuracy. The proposed method may have potential applications in wireless communications, target recognition, and identification.

scholarly journals Low-complexity DOA estimation method for a co-prime linear array

2019 ◽  
Vol 2019 (20) ◽  
pp. 6503-6506
Author(s):  
Xuchen Wu ◽  
Xiaopeng Yang ◽  
Bowen Han ◽  
Feng Xu
Keyword(s):  
Linear Array ◽  
Estimation Method ◽  
Doa Estimation ◽  
Low Complexity

scholarly journals Direction of Arrival Estimation of Uncorrelated Signals Using Root-MUSIC Algorithm for ULAs and UCAs

2018 ◽  
Vol 7 (4.36) ◽  
pp. 398
Author(s):  
S. Venkata Rama Rao ◽  
A. Mallikarjuna Prasad ◽  
Ch. Santhi Rani
Keyword(s):  
Basic Problem ◽  
Signal To Noise Ratio ◽  
Direction Of Arrival ◽  
Doa Estimation ◽  
Circular Array ◽  
Music Algorithm ◽  
Linear Arrays ◽  
Circular Arrays ◽  
Symmetric Structure ◽  
The Individual

In this paper, Root-MUSIC algorithm for direction of arrival (DOA) estimation of uncorrelated signals is explored both for uniform linear and uniform circular arrays. The basic problem in Uniform Linear Arrays (ULAs) is Mutual coupling between the individual elements of the antenna array. This problem is reduced in Uniform Circular Arrays (UCAs) because of its symmetric structure. The DOA estimation of uncorrelated signals that have different power levels is simulated on a MATLAB environment. And the noise consider is white across all the array elements. The factors considered for simulation are number of number of snapshots, array elements, radius of circular array, array length, and signal to noise ratio. 

scholarly journals DOA Estimation Method in Multipath Environment for Passive Bistatic Radar

2019 ◽  
Vol 2019 ◽  
pp. 1-9 ◽  
Author(s):  
Panhe Hu ◽  
Qinglong Bao ◽  
Zengping Chen
Keyword(s):  
Signal To Noise Ratio ◽  
Estimation Method ◽  
Doa Estimation ◽  
Estimation Accuracy ◽  
Bistatic Radar ◽  
Spatial Difference ◽  
Coherent Signals ◽  
Vhf Radar ◽  
Multipath Environment ◽  
Passive Bistatic Radar

Direction-of-arrival (DOA) estimation in multipath environment is an important issue for passive bistatic radar (PBR) using frequency agile phased array VHF radar as illuminator of opportunity. Under such scenario, the main focus of this paper is to cope with the closely spaced uncorrelated and coherent signals in low signal-to-noise ratio and limited snapshots. Making full use of the characteristics of moduli of eigenvalues, the DOAs of the uncorrelated signals are firstly estimated. Afterwards, their contributions are eliminated by means of spatial difference technique. Finally, in order to improve resolution and accuracy DOA estimation of remaining coherent signals while avoiding the cross-terms effect, a new beamforming solution based iterative adaptive approach (IAA) is proposed to deal with a reconstructed covariance matrix. The proposed method combines the advantages of both spatial difference method and the IAA algorithm while avoiding their shortcomings. Simulation results validate its effectiveness; meanwhile, the good performances of the proposed method in terms of resolution probability, detection probability, and estimation accuracy are demonstrated by comparison with the existing methods.

Sign in / Sign up

Export Citation Format

Share Document