scholarly journals Dynamic Behavior Analysis of Intermediate Bearing-Squeeze Film Dampers-Rotor System under Constant Maneuvering Overload

2021 ◽  
Vol 2021 ◽  
pp. 1-24
Author(s):  
Nan Zheng ◽  
Mo-li Chen ◽  
Gui-Huo Luo ◽  
Zhi-Feng Ye
Keyword(s):  
Dynamic Behavior ◽  
Dynamic Characteristics ◽  
Rotor System ◽  
Squeeze Film ◽  
Nonlinear Dynamic Model ◽  
Maneuvering Flight ◽  
Squeeze Film Dampers ◽  
Frequency Components ◽  
Simulation Results ◽  
Rotor Dynamic

Under the flight maneuvering of an aircraft, the maneuvering load on the rotor is generated, which may induce the change of dynamic behavior of aeroengine rotor system. To study the influence on the rotor dynamic behavior of constant maneuvering overload, a nonlinear dynamic model of bearing-rotor system under arbitrary maneuver flight conditions is presented by finite element method. The numerical integral method is used to investigate the dynamic characteristics of the rotor model under constant maneuvering overload, and the simulation results are verified by experimental works. Based on this, the dynamic characteristics of a complex intermediate bearing-squeeze film dampers- (SFD-) rotor system during maneuvering flight are analyzed. The simulation results indicate that the subharmonic components are amplified under constant maneuvering overload. The amplitude of the combined frequency components induced by the coupling of the inner and outer rotors is weakened. The static displacements of the rotor caused by the additional excitation force are observed. Besides, the period stability of the movement of the rotor deteriorates during maneuver flight. The design of counterrotation of the inner and outer rotors can effectively reduce the amplitude of subharmonic under constant maneuvering overload.

Effect of flight/structural parameters and operating conditions on dynamic behavior of a squeeze-film damped rotor system during diving–climbing maneuver

2020 ◽  
pp. 095441002094261
Author(s):  
Xi Chen ◽  
Xiaohua Gan ◽  
Guangming Ren
Keyword(s):  
Dynamic Characteristics ◽  
Rotor System ◽  
Elastic Support ◽  
Outer Ring ◽  
Squeeze Film ◽  
Inertial Forces ◽  
Oil Film ◽  
Maneuvering Flight ◽  
Mass Unbalance ◽  
Static Eccentricity

During aircraft maneuvering flights, engine's rotor-bearing systems are subjected to parametric excitations and additional inertial forces, which may cause severe vibration and abnormal operation. Based on Lagrange's principle combined with finite element modeling, the differential equations of motion for a squeeze film damped rotor-bearing system mounted on an aircraft in maneuvering flight are derived. Using Newmark–Hilber–Hughes–Taylor integration method, dynamic characteristics of the nonlinear rotor system under maneuvering flight are investigated. The factors are considered, involving mass unbalance, oil–film force, gravity, parametric excitations and additional inertial forces, and instantaneous static eccentricity of journal induced by maneuvering loads. The effects of forward velocity, radius of curvature, rotating speed, mass unbalance, oil–film clearance, and elastic support stiffness on transient responses of rotor system are discussed during diving–climbing maneuver. The results indicate that when the aircraft performs a diving–climbing maneuver in the vertical plane, the journal deviates from the center of oil–film outer ring, and the excursion direction of whirl orbit is determined by centrifugal acceleration and additional gyroscopic moment. The journal whirls asynchronously around the instantaneous static eccentricity and its magnitude is related to the maneuvering loads and the supporting stiffness. Increasing forward velocity or decreasing pitching radius, the rotor vibration will enter earlier into or withdraw later from the relatively large eccentricity. Rotating near critical speeds or excessive mass unbalances should be prevented during maneuvering flights. For large maneuver, the oil–film radial clearance needs to be enlarged properly to avoid hard contact between journal and outer ring. In addition, the stiffness of elastic support needs to be appropriately determined for damping performance. Overall, it provides a flexible approach with good expandability to predict dynamic characteristics of on-board squeeze-film damped rotor system during maneuvering flights in the design process.

scholarly journals Dynamic Behavior of Geared Rotors

1997 ◽  
Author(s):  
T. N. Shiau ◽  
J. S. Rao ◽  
J. R. Chang ◽  
Siu-Tong Choi
Keyword(s):  
Dynamic Behavior ◽  
Chaotic Behavior ◽  
Squeeze Film ◽  
Rotor Systems ◽  
Lateral Vibrations ◽  
Squeeze Film Dampers ◽  
Torsional Excitation ◽  
Route To Chaos

This paper is concerned with the dynamic behavior of geared rotor systems supported by squeeze film dampers, wherein coupled bending torsion vibrations occur. Considering the imbalance forces and gravity, it is shown that geared rotors exhibit chaotic behavior due to non linearity of damper forces. The route to chaos in such systems is established. In geared rotor systems, it is shown that torsional excitation can induce lateral vibrations. It is shown that squeeze film dampers can suppress large amplitudes of whirl arising out of torsional excitation.

Nonlinear Dynamic Study on Effects of Rub-Impact Caused by Oil-Rupture in a Multi-Shafts Turbine With a Squeeze Film Damper

2014 ◽  
Author(s):  
T. N. Shiau ◽  
C. R. Wang ◽  
D. S. Liu ◽  
W. C. Hsu ◽  
T. H. Young
Keyword(s):  
Dynamic Behavior ◽  
Nonlinear Dynamic ◽  
Equations Of Motion ◽  
Rotor System ◽  
Squeeze Film ◽  
Speed Ratio ◽  
Frequency Spectra ◽  
Squeeze Film Damper ◽  
Assumed Mode Method ◽  
Nonlinear Dynamic Behavior

An investigation is carried out the analysis of nonlinear dynamic behavior on effects of rub-impact caused by oil-rupture in a multi-shafts turbine system with a squeeze film damper. Main components of a multi-shafts turbine system includes an outer shaft, an inner shaft, an impeller shaft, ball bearings and a squeeze film damper. In the squeeze film damper, oil forces can be derived from the short bearing approximation and cavitated film assumption. The system equations of motion are formulated by the global assumed mode method (GAMM) and Lagrange’s approach. The nonlinear behavior of a multi-shafts turbine system which includes the trajectories in time domain, frequency spectra, Poincaré maps, and bifurcation diagrams are investigated. Numerical results show that large vibration amplitude is observed in steady state at rotating speed ratio adjacent to the first natural frequency when there is no squeeze film damper. The nonlinear dynamic behavior of a multi-shafts turbine system goes in its way into aperiodic motion due to oil-rupture and it is unlike the usual way (1T = >2T = >4T = >8T etc) as compared to one shaft rotor system. The typical routes of bifurcation to aperiodic motion are observed in a multi-shafts turbine rotor system and they suddenly turn into aperiodic motion from the periodic motion without any transition. Consequently, the increasing of geometric or oil parameters such as clearance or lubricant viscosity will improve the performance of SFD bearing.

Research on dynamic characteristics and fatigue robust optimization of integrated vehicle model

2018 ◽  
Vol 232 (14) ◽  
pp. 1982-1999
Author(s):  
Bobo Li ◽  
Huiqun Yuan ◽  
Tianyu Zhao ◽  
Guangding Wang
Keyword(s):  
Experimental Data ◽  
Robust Optimization ◽  
Dynamic Characteristics ◽  
Six Sigma ◽  
Multiple Frequency ◽  
Heavy Duty ◽  
Vehicle Model ◽  
Design For Six Sigma ◽  
Frequency Components ◽  
Simulation Results

This paper investigates the dynamic characteristics and fatigue robust optimization of heavy-duty tractor. First, this paper presents a vehicle model with sub-structure method. Based on the theory of base motion, the structure dynamic characteristics are analyzed. Second, the accuracy of the method is verified by comparing the experimental results with the simulation results. Also, the dynamic response and the transfer function of vehicle are obtained using the above methods. Combined with the experimental data, the methods of random multiple frequency components and multi-axial fatigue life are adopted to analyze the fatigue damage of the heavy-duty tractor under different road conditions. Finally, the Design for Six Sigma is used to optimize the vehicle’s structure. The results show that by using the proposed method, the dynamic characteristics of the vehicle can be analyzed accurately and effectively, robustness of the vehicle can be improved, and mass of the vehicle can be reduced.

scholarly journals Dynamic Characteristics and Experimental Research of Dual-Rotor System with Rub-Impact Fault

2016 ◽  
Vol 2016 ◽  
pp. 1-11 ◽  
Author(s):  
Hongzhi Xu ◽  
Nanfei Wang ◽  
Dongxiang Jiang ◽  
Te Han ◽  
Dewang Li
Keyword(s):  
Dynamic Characteristics ◽  
Element Model ◽  
Rotor System ◽  
Rotor Vibration ◽  
Double Frequency ◽  
Fundamental Frequencies ◽  
Outer Rotor ◽  
Dimensional Finite Element ◽  
Frequency Components ◽  
Collision Force

Rub-impact fault model for dual-rotor system was further developed, in which rubbing board is regarded as elastic sheet. Sheet elastic deformation, contact penetration, and elastic damping support during rubbing of sheet and wheel disk were considered. Collision force and friction were calculated by utilizing Hertz contact theory and Coulomb model and introducing nonlinear spring damping model and friction coefficient. Then kinetic differential equations of rub-impact under dry rubbing condition were established. Based on one-dimensional finite element model of dual-rotor system, dynamic transient response of overall structure under rub-impact existing between rotor wheel and sheet was obtained. Meanwhile, fault dynamic characteristics and impact of rubbing clearance on rotor vibration were analyzed. The results show that, during the process of rub-impact, the spectrums of rotor vibration are complicated and multiple combined frequency components of inner and outer rotor fundamental frequencies are typical characteristic of rub-impact fault for dual-rotor system. It also can be seen from rotor vibration response that the rubbing rotor’s fundamental frequency is modulated by normal rotor double frequency.

Electric-Hydraulic Actuator Design for a Hybrid Squeeze-Film Damper-Mounted Rigid Rotor System With Active Control

2005 ◽  
Vol 128 (2) ◽  
pp. 176-183 ◽  
Author(s):  
Her-Terng Yau ◽  
Chieh-Li Chen
Keyword(s):  
Dynamical Behavior ◽  
Rotor System ◽  
Squeeze Film ◽  
Rigid Rotor ◽  
Loop Gain ◽  
Hydraulic Actuator ◽  
Squeeze Film Damper ◽  
Chaotic Vibration ◽  
Squeeze Film Dampers ◽  
Actuator Design

When a squeeze-film damper-mounted rigid rotor system is operated eccentrically, the nonlinear forces are no longer radially symmetric and a disordered dynamical behavior (i.e., quasi-periodic and chaotic vibration) will occur. To suppress the undesired vibration characteristics, the hybrid squeeze-film damper bearing consisting of hydrostatic chambers and hydrodynamic ranges is proposed. In order to change the pressure in hydrostatic chambers, two pairs of electric-hydraulic orifices are used in this paper. The dynamic model of the system is established with the consideration of the electric-hydraulic actuator. The complex nonsynchronous vibration of squeeze-film dampers rotor-bearing system is demonstrated to be stabilized by such electric-hydraulic orifices actuators with proportional-plus-derivative (PD) controllers. Numerical results show that the nonchaotic operation range of the system will be increased by tuning the control loop gain.

Sign in / Sign up

Export Citation Format

Share Document