scholarly journals Study of Fuzzy Fractional Nonlinear Equal Width Equation in the Sense of Novel Operator

2021 ◽  
Vol 2021 ◽  
pp. 1-12
Author(s):  
Muhammad Naeem ◽  
Ahmed A. Khammash ◽  
Ibrahim Mahariq ◽  
Ghaylen Laouini ◽  
Jeevan Kafle

In this paper, we designed an algorithm by applying the Laplace transform to calculate some approximate solutions for fuzzy fractional-order nonlinear equal width equations in the sense of Atangana-Baleanu-Caputo derivatives. By analyzing the fuzzy theory, the suggested technique helps the solution of the fuzzy nonlinear equal width equations be investigated as a series of expressions in which the components can be effectively recognised and produce a pair of numerical results with the uncertainty parameters. Several numerical examples are analyzed to validate convergence outcomes for the given problem to show the proposed method’s utility and capability. The simulation outcomes reveal that the fuzzy iterative transform method is an effective method for accurately and precisely studying the behavior of suggested problems. We test the developed algorithm by three different problems. The analytical analysis provided that the results of the models converge to their actual solutions at the integer-order. Furthermore, we find that the fractional derivative produces a wide range of fuzzy results.

Author(s):  
Bakhtiyar Ismailov ◽  
Zhanat Umarova ◽  
Khairulla Ismailov ◽  
Aibarsha Dosmakanbetova ◽  
Saule Meldebekova

<p>At present, when constructing a mathematical description of the pyrolysis reactor, partial differential equations for the components of the gas phase and the catalyst phase are used. In the well-known works on modeling pyrolysis, the obtained models are applicable only for a narrow range of changes in the process parameters, the geometric dimensions are considered constant. The article poses the task of creating a complex mathematical model with additional terms, taking into account nonlinear effects, where the geometric dimensions of the apparatus and operating characteristics vary over a wide range. An analytical method has been developed for the implementation of a mathematical model of catalytic pyrolysis of methane for the production of nanomaterials in a continuous mode. The differential equation for gaseous components with initial and boundary conditions of the third type is reduced to a dimensionless form with a small value of the peclet criterion with a form factor. It is shown that the laplace transform method is mainly suitable for this case, which is applicable both for differential equations for solid-phase components and calculation in a periodic mode. The adequacy of the model results with the known experimental data is checked.</p>


2019 ◽  
Vol 3 (2) ◽  
pp. 14 ◽  
Author(s):  
Ndolane Sene ◽  
Aliou Niang Fall

In this paper, the approximate solutions of the fractional diffusion equations described by the fractional derivative operator were investigated. The homotopy perturbation Laplace transform method of getting the approximate solution was proposed. The Caputo generalized fractional derivative was used. The effects of the orders α and ρ in the diffusion processes was addressed. The graphical representations of the approximate solutions of the fractional diffusion equation and the fractional diffusion-reaction equation both described by the Caputo generalized fractional derivative were provided.


2015 ◽  
Vol 2015 ◽  
pp. 1-9 ◽  
Author(s):  
Mohamed S. Mohamed ◽  
Khaled A. Gepreel ◽  
Faisal A. Al-Malki ◽  
Maha Al-Humyani

User friendly algorithm based on the optimal homotopy analysis transform method (OHATM) is proposed to find the approximate solutions to generalized Abel’s integral equations. The classical theory of elasticity of material is modeled by the system of Abel integral equations. It is observed that the approximate solutions converge rapidly to the exact solutions. Illustrative numerical examples are given to demonstrate the efficiency and simplicity of the proposed method. Finally, several numerical examples are given to illustrate the accuracy and stability of this method. Comparison of the approximate solution with the exact solutions shows that the proposed method is very efficient and computationally attractive. We can use this method for solving more complicated integral equations in mathematical physical.


2013 ◽  
Vol 68 (10-11) ◽  
pp. 635-645 ◽  
Author(s):  
Ilyas Khan ◽  
Farhad Ali ◽  
Sharidan Shafie ◽  

In this paper, exact solutions of velocity and stresses are obtained for the magnetohydrodynamic (MHD) flow of a Maxwell fluid in a porous half space by the Laplace transform method. The flows are caused by the cosine and sine oscillations of a plate. The derived steady and transient solutions satisfy the involved differential equations and the given conditions. Graphs for steady-state and transient velocities are plotted and discussed. It is found that for a large value of the time t, the transient solutions disappear, and the motion is described by the corresponding steady-state solutions.


1987 ◽  
Vol 109 (2) ◽  
pp. 281-286 ◽  
Author(s):  
G. Spiga ◽  
M. Spiga

The two-dimensional transient behavior of gas-to-gas crossflow heat exchangers is investigated, solving by analytical methods the thermal balance equations in order to determine the transient distribution of temperatures in the core wall and in both the unmixed gases. Assuming large wall capacitance, the general solutions are deduced by the Laplace transform method and are presented as integrals of modified Bessel functions on space and time, for a transient response with any arbitrary initial and inlet conditions, in terms of the number of transfer units, capacity rate and conductance ratio. Specializing the entrance temperature and assuming constant initial conditions, the most meaningful transient conditions (such as step, ramp, and exponential responses) have been simulated and the relevant solutions, expressed by means of either integrals or series, have been accurately computed with extremely low computational time. The temperature responses are then presented in graphic form for a wide range of the number of transfer units.


2016 ◽  
Vol 2016 ◽  
pp. 1-5 ◽  
Author(s):  
Hassan Kamil Jassim

We used the local fractional variational iteration transform method (LFVITM) coupled by the local fractional Laplace transform and variational iteration method to solve three-dimensional diffusion and wave equations with local fractional derivative operator. This method has Lagrange multiplier equal to minus one, which makes the calculations more easily. The obtained results show that the presented method is efficient and yields a solution in a closed form. Illustrative examples are included to demonstrate the high accuracy and fast convergence of this new method.


2015 ◽  
Vol 2 (4) ◽  
pp. 140511 ◽  
Author(s):  
Brajesh K. Singh ◽  
Vineet K. Srivastava

The main goal of this paper is to present a new approximate series solution of the multi-dimensional (heat-like) diffusion equation with time-fractional derivative in Caputo form using a semi-analytical approach: fractional-order reduced differential transform method (FRDTM). The efficiency of FRDTM is confirmed by considering four test problems of the multi-dimensional time fractional-order diffusion equation. FRDTM is a very efficient, effective and powerful mathematical tool which provides exact or very close approximate solutions for a wide range of real-world problems arising in engineering and natural sciences, modelled in terms of differential equations.


2013 ◽  
Vol 2013 ◽  
pp. 1-6 ◽  
Author(s):  
Vineet K. Srivastava ◽  
Mukesh K. Awasthi ◽  
R. K. Chaurasia ◽  
M. Tamsir

One-dimensional second-order hyperbolic telegraph equation was formulated using Ohm’s law and solved by a recent and reliable semianalytic method, namely, the reduced differential transform method (RDTM). Using this method, it is possible to find the exact solution or a closed approximate solution of a differential equation. Three numerical examples have been carried out in order to check the effectiveness, the accuracy, and convergence of the method. The RDTM is a powerful mathematical technique for solving wide range of problems arising in science and engineering fields.


2018 ◽  
Vol 22 (Suppl. 1) ◽  
pp. 7-14 ◽  
Author(s):  
Mustafa Bayram ◽  
Veysel Hatipoglu ◽  
Sertan Alkan ◽  
Sebahat Das

The aim of this work is to determine an approximate solution of a fractional order Volterra-Fredholm integro-differential equation using by the Sinc-collocation method. Conformable derivative is considered for the fractional derivatives. Some numerical examples having exact solutions are approximately solved. The comparisons of the exact and the approximate solutions of the examples are presented both in tables and graphical forms.


Author(s):  
Dumitru Vieru ◽  
Constantin Fetecau ◽  
Najma Ahmed ◽  
Nehad Ali Shah

A new time-fractional derivative with Mittag-Leffler memory kernel, called the generalized Atangana-Baleanu time-fractional derivative is defined along with the associated integral operator. Some properties of the new operators are proved. The new operator is suitable to generate by particularization the known Atangana-Baleanu, Caputo-Fabrizio and Caputo time-fractional derivatives. A generalized mathematical model of the advection-dispersion process with kinetic adsorption is formulated by considering the constitutive equation of the diffusive flux with the new generalized time-fractional derivative. Analytical solutions of the generalized advection-dispersion equation with kinetic adsorption are determined using the Laplace transform method. The solution corresponding to the ordinary model is compared with solutions corresponding to the four models with fractional derivatives.


Sign in / Sign up

Export Citation Format

Share Document